Jump to content
SAU Community

Recommended Posts

Hey all, looking at buying this car but want to know if they have any major pitfalls, expensive to maintain etc. I've done a search and several articles say they are pretty good and reliable, but being as this is a Nissan site, somebody on here might know something!

Here is a link to the said car.

http://www.tassiecars.com.au/detail.jsp?id=20516&ti=true

Thanks in advance,

Greg.

Link to comment
https://www.sau.com.au/forums/topic/250878-maxima-30s-touring-sedan/
Share on other sites

Hiya,

My wife had one and my mom still has one.

In Sydney, that price could be knocked down a bit since unlike the GV, it doesn't have leather, electrics, sunroof or tv.

That one looks in really good condition tho'. Pearl white isn't it?

Down to business,

Check the Air Cond. since some of the compressors are a bit weak

The fuel consumpt'n can be in the high 10s or low 11s

It's a daily so don't expect the cornering to be that great

Gas bonnet struts can be weak on retaining gas

Braking can be better on stopping distance

Stop hard and then reverse slowly and check on any noises etc.

Torque steer on sharp acceleration from a standing start

Plusses...

Engine is strong

Should have no oil leaks because the engine is not renowned for that

Should have no rust

Very quiet

Overall, it's a great car in what it was designed for...

Hope that helps,

Tez

Yes, I agree, price is a little on the high side....

I had one for 140,000 trouble free kms... Great car, got Repco to service it every 10,000 or 20,000 km, depending on cash availability, and the car didn't care. Keep an eye on the brakes, but nothing expensive there. No problems at all with the air, as good at 200,000 km as when we first got it at 60,000 km. Average, not best, economy over the 140,000 km was 9.1 l/100km. Gearbox is also strong and velour interior very hard wearing.

Only got rid of it, because we now have a family and needed a few more airbags, wife now has Saab 9-5 which uses way more fuel, from a smaller engine, and don't even ask me about the servicing....

Edited by nickcorr

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Bump on this to not make another post, had a ‘head drain’ leak on me and have the engine out as we speak. Planning on just putting a new freeze plug back in , plug the tapped holes and just be done with that headache.    Now I still want to relieve pressure to allow oil to pass down the blocks returns easier. I’ve seen catch cans with multiple vents help folks with this issue on this forum.  I’m wanting to make my own. I have some pictures here of my setup if anyone can help how I should plumb and design the catch can I would deeply appreciate it !   rb25 Oil upgrades: 1.0mm restrictor n1 pump/billet gears extended crank collar  extended sump with trap doors/w welded fitting    
    • The Frenchy's kit is the way to go forward. A modern compressor that weighs about 1/2 as much, is at least twice as efficient, and will do a good job on R134a. And of course the kit has everything else you need to connect it up and have it work properly.
    • Hey all , I am in the process of having the AC system in my r32 GTST converted from r12 to r134a and I’m being told my compressor has gone bad and I will need a new one. I was wondering if anybody has any suggestions for what is the best route to go aside from dropping $1500 on a new oem one? I did see that Frenchy’s performance garage offers a kit to mount a Toyota compressor, has anybody actually used this kit on their car? Or is there anywhere I could purchase just a clutch? Any help is appreciated.
    • Well, your RB20 ECU loom won't have wires for the boost solenoid, that boost sensor, and possibly one or two other things. There could be differences in seemingly random things like the charcoal canister purge solenoid, because the 25DET has to handle boost in the vacuum system and the 20DE does not. I don't know - I haven't looked. It is very likely that all the most important things are same-same, being the main sensors like AFM, CAS, etc, and the injectors and ignition. Not that you'll need the AFM for the Haltech anyway. I would suggest that you would seriously want to sit down with the pinouts for both ECUs and just go through them and highlight green what is the same, orange what is different/missing, and make a plan from there. It's not going to be difficult. It will either be the same or need to be fixed.
    • yeaaa that's why I haven't done any wiring to the stock ecu harness because I have the haltech, but then that leads me to the other question of "is the pnp harness really plug and play?" or would I have to still switch some pins/wires over because the pnp is for the rb25det neo harness, and not for the rb20de neo harness. was really hoping to find something to spoon feed me since so many people have done rb20neo + t conversions, but man this is rough.
×
×
  • Create New...