Jump to content
SAU Community

Recommended Posts

am looking at a minor brake upgrade and trying to decide weather to got the UAS 343MM BIG BRAKE KIT FOR NISSAN SKYLINE GTR or the STAGE 1 BRAKE UPGRADE KIT FOR SKYLINE R32 GTR.

anyone using either?? just wondering will they both work with standard R32 GTR caliper and will they both fit under a 17" rim

cheers

Edited by RBeed
am looking at a minor brake upgrade and trying to decide weather to got the UAS 343MM BIG BRAKE KIT FOR NISSAN SKYLINE GTR or the STAGE 1 BRAKE UPGRADE KIT FOR SKYLINE R32 GTR.

anyone using either?? just wondering will they both work with standard R32 GTR caliper and will they both fit under a 17" rim

cheers

They wont fit the 17" rims, best get a set of 18" rims then can go up to 360mm, if your going to spend the money then do it properly.

  • 2 months later...
I was looking at the stage1 upgrade (324mm discs) as I wanted to keep the 17's I have.. any thoughts on these compared to using the 296mm stockers?

Old thread but I didn't want to start a new one.

I am looking at doing the above and was wondering if anyone has compared the two - 324mm with spacer vs 296mm stocker?

On the kits I have seen bigger brake pads are used to suit the GTR caliper that give greater rotor coverage. Anyone heard of this before?

Are these adapter kits more prone to crack the DBA 4000 rotor with track work?

Cheers.

Edited by SRS13

I'm running 327mm discs with dogbones and 33gtst calipers on my 32, barely fit under the 34GTT rims I had.

Those discs with Ferodo DS2500 pads was a hell of an upgrade over the 296mm 33 discs and Bendix pads I had previously.

I'm running 327mm discs with dogbones and 33gtst calipers on my 32, barely fit under the 34GTT rims I had.

Those discs with Ferodo DS2500 pads was a hell of an upgrade over the 296mm 33 discs and Bendix pads I had previously.

Thanks.

Have you tried the 327mm set up with the same Bendix pads for a direct comparison? Just trying to work out if the pads made most of the difference or the increased rotor size.

No I didn't, I got the dogbones and rotors for a VERY good price and decided to put some decent street/occaisional track pads in while I was at it instead of reusing the old noisy bendix pads.

Edited by bubba
  • 1 year later...

old thread but saves me starting a new one :laugh:

im interested in the UAS 324mm front brake upgrade for the r32 gtr.

does anyone have any pics with that size rotor with standard r32 gtr caliper ?

obviously the caliper wont be making the most of the entire 324mm disc as that caliper isnt deep enough ?

anymore info/advise/pics would be great !

cheers

old thread but saves me starting a new one :P

im interested in the UAS 324mm front brake upgrade for the r32 gtr.

does anyone have any pics with that size rotor with standard r32 gtr caliper ?

obviously the caliper wont be making the most of the entire 324mm disc as that caliper isnt deep enough ?

anymore info/advise/pics would be great !

cheers

Do a compare & contrast between the pads on the Sumitomo calliper & those on the Brembo. You will be amused by how similar in area they are....

Did the 324mm upgrade on my 32GTR. Loved it, didn't fade like the 296mm setup and had better pedal feel.

I had no problem with the inner area not being used. I used this setup with brake deflectors to improve cooling of the discs.

Pitty it wouldn't fit under the stock 16's :P

I used project mu ns pads.

Pics of mine.

post-12712-1288758517_thumb.jpgpost-12712-1288758530_thumb.jpg

post-12712-1288758597_thumb.jpg

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Anyone want to make me an offer to take my v36/g37 3.7l manual coupe in full? Off memory it was low 100k km but the battery is flat so can't tell right now. What's wrong. I had engine problem's that led to a nice clunk. It made it home but it wasn't pretty for the last few kms. Happened under revs. Sounds like bottom end.. never got around to fully checking or fixing it so the car has sat still and unregistered for a few years. Minor bump in front end set the pedestrian protection under bonnet airbag off and that was meant to be repaired, but while waiting for the repair (parts to come) I got the engine problem. The rest of the car is in decent condition. All drive line is good. All interior is good. Leather interior. Wheels in good condition and decent tyres although the ps4s are likely a little too old now it's sat still. Colour of the car is pewter off memory, the dark grey colour. In Camden NSW. Would need a tray back pickup.
    • Anyone want to make me an offer to take my v36/g37 3.7l manual coupe in full? Off memory it was low 100k km but the battery is flat so can't tell right now. What's wrong. I had engine problem's that led to a nice clunk. It made it home but it wasn't pretty for the last few kms. Happened under revs. Sounds like bottom end.. never got around to fully checking or fixing it so the car has sat still and unregistered for a few years. Minor bump in front end set the pedestrian protection under bonnet airbag off and that was meant to be repaired, but while waiting for the repair (parts to come) I got the engine problem. The rest of the car is in decent condition. All drive line is good. All interior is good. Leather interior. Wheels in good condition and decent tyres although the ps4s are likely a little too old now it's sat still. Colour of the car is pewter off memory, the dark grey colour. In Camden NSW. Would need a tray back pickup.
    • I started with the above in my head too, and I might be reading / thinking about what they want wrong, which is why I complicated it a bit further. Purpose I'm seeing is for the corner indicator to be on with headlights, and then if the indicator turns on it can still flash. The relay part above I can see working as required, except in the case of headlight is on, and indicator is on. The change over relay you've wired in would get signal from the indicator, and as it flashes would give power to the globe from the indicator, but as it flashes off, power comes from the headlight, which would cause the indicator to be constantly on when headlight is on, even while indicator change over is flashing. That is unless we don't care if it flashes or not if the headlight is on? I guess that's an OP clarification.
    • HI, Ive got an r34 gtt sedan A/T. The instrument cluster went out and I replaced it with another A/T everything visually looks the same and all the gauges work now with the exception of the speedometer and odometer. The speedo will stay pinned at zero until I'm going about 55kmh and then it'll say Im going about 5kmh. my odometer seems to be tracking at about a 1/10 of what it should. If I go 1km it'll say I've only gone 0.01. Appreciate any and all help. Ive tried searching through the forums reddit and a local fb group. The only info I think I've found is that some cars didnt come equipped with TCS (mind is) and the clusters may be different between those? I've also installed a brand new VSS and no joy obviously. TIA. 
    • what speedo healer did you use?  
×
×
  • Create New...