Jump to content
SAU Community

Bov Before Or After Fmic

Gongts4

By Gongts4,
in Engines & Forced Induction

 Share

Recommended Posts

Gongts4 Explorer

Gongts4

Posted
Posted

jst having to make up some custom cooler piping for my setup, and was wondering if anyone had a good argument for where i should place my bov. atm im slightly confused as my mate has his bov jst after the turbo before the cooler, he does this because he belives it does a better job of protecting the turbo from spining backwards......but if this is true why do you see nissan placing there bov's after the cooler, is that because there plumbing colder air back to the turbo...........or does it not make a difference where she goes.....any ideas guys.. :D

Link to comment
https://www.sau.com.au/forums/topic/250973-bov-before-or-after-fmic/
Share on other sites
Mr. Untouchable Experienced

Mr. Untouchable

Posted
Posted

Ive always run them as close to the throtle body as possible ie 6-8 inches away.

and as for being "better" for the turbo to place the BOV close to the turbo, mmm cant really see how its going to make it better.

what does matter is plumbing wasted air back into the intake pipe after the AFM.

cheers

Bennett Mentor

Bennett

Posted
Posted

Turbos NEVER spin backwards. Load of shit. What sort of blow off valve is it? If its aftermarket you might want to hide it down near the cooler so cops dont give you trouble unless you feel the need to show it off. I prefer plumback blow off valves personally and would put it in the stock nissan position unless you have a front facing plenum etc.

Hell Fire Collaborator

Hell Fire

Posted
Posted (edited)

Closer to the throttle body you've got the air flowing one direction only, if you put it at the other end you end up with air moving back and forward through the IC, possibly having your colder air in the system reabsorb some of the heat as the pressure drops and becomes less dense.

Suppose with a larger IC it will hold a pretty fair capacity, but keep in mind at 3000 RPM your engine is sucking in over 0.075m3 a sec (150 CFMish), so whatever air sits in the IC will be gone pretty quickly once you get back on throttle. May not matter so much until you're chasing big power/response but if you're going to do it once, closer to the throttle body is likely to do better.

Edited by Hell Fire
Gongts4 Explorer

Gongts4

Posted
  • Author
Posted

ok so after taking all this info in, i've decided that i am placing my BOV before the cooler only because it makes it alot easier to plumb it back. the way i have riged it up is the bov well be in an enclosed box where the air filter is housed keeping under bonnet temps out, also the cooler and air filter piping to the turbo have been wrapped in heat resitant tape, hopefully this well help keep the air going to the turbo fairly dense.... also im sticking with my stock bov , it does a good job , sounds good and is legal too.

SLAPS Rising Star

SLAPS

Posted
Posted

Sell the bov.

Many cars out there (street/rally/grip/drift) that run without them and have no reliability issues.

The response gained when running no bov out weighs any driveability or if it concerns you emission negatives.

I've ran 20psi for a good 30k and not one issue.

Prior I had run 100,000km's on the std ceramic turbo @ 1bar and again no issues.

R31Nismoid Grand Master

R31Nismoid

Posted
Posted

^^ please dont start the 'gain' rubbish.

End of the day, the stock ECU expects a BOV to be there. Emissions also required it.

Using cars that are not street registered and working within the confines of the law are not valid examples

Bennett Mentor

Bennett

Posted
Posted

I have a power fc tuned with the blow off valve off as the intake pipe im using at the moment doesnt have an inlet for the plumback. The car runs the same as with the stock ecu in (well for me anyway). It almost stalls when you press the clutch after being in gear at high revs etc. Its also a lot more jerky on gear changes. I have learned to deal with it but it deffinately is different the way the cars drives and ill be putting the bov back on as soon as i can be bothered to make up a new intake pipe.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing


  • Similar Content

  • Latest Posts

    • Dose Pipe Sutututu
      Turn signal wiring question

      By Dose Pipe Sutututu · Posted

      Convert to dual filament bulb   FWIW, it will look odd - I dare say a bit dumb as it looks like your flasher relay has shit the bed.
    • GTSBoy
      Possible swap on R34 RB20DE NEO?

      By GTSBoy · Posted

      If the RB20 box in the car is a push clutch, then yes, you will need to deal with the pull clutch on the turbo box. You either buy a pull clutch and don't use the old one, or you do the things needed to convert the turbo box's clutch arrangement over to push. Which is a bit of a f**karound. "Making" a custom tailshaft is the easy part. But you will need to source the front clip yoke - the bit that goes into the output of the gearbox. These are not as easy to find. They are out there, but they don't grow on trees the way that they used to.
    • GTSBoy
      Turn signal wiring question

      By GTSBoy · Posted

      Indicator bulbs are way too bright to use as a "corner marker" (we call them parking lights too). Sure. Go ahead and do it. But realise that you wil need to come up with all your own wiring to do it, as no-one will have a standard howto worked out for Skylines. It's just a matter of abandoning everything that Nissan have done and starting from scratch. You'd probably be better off retrofitting tailght/brakelight globe bases into the front indicator housings and using the taillight circuit for your corner marker and the brake light as the indicator. You'd need to work out how to kill the marker circuit while the indicator is flashing, otherwise it won't flash on-off, just bright-less bright.
    • Kapr
      Possible swap on R34 RB20DE NEO?

      By Kapr · Posted

      Hi. A little bit of an update. It maybe(hope not) looks like i would need a new tranny(it would be "maybe" a cheaper or better option anyway) So i need some info. I know i need a different propshaft(i can make custom one) LSD is not a problem cuz the engine will be still(for now) N/A RB20. So if i buy RB25DET NEO tranny...is there something else i need? I read something about push/pull type but i do not know if i need to "change" something or i can just plug n play onto my engine a go? Thanks for the advice  
    • OakvilleGTR
      Turn signal wiring question

      By OakvilleGTR · Posted

      Good morning all, Bit of a random question but figured I’d finally throw it out after wondering for a long while. Before I start, I'm hoping to do this purely out of personal preference. I think it would look better at night, and don't mind at all spending a few hours and dollars to get it done. I've copied this from a non-Skyline specific forum, so I apologize for the explanation of our headlight switch setup that we all know. Here we go: Zero lights (switch off) Parking lights (switch position 1) being a rectangular marker on the outside of the housing, my low beam being the projector in the centre (position 2), and a high beam triggered by my turn signal stalk. Most North American cars I’ve owned of this era have power to the amber corner (turning indicator) light as part of the first switch (parking lights). I’d love to have these amber corners receive power when the headlights and parking lights are on (headlight switch), yet still blink when using the turn signal which is of course a separate switch. Hopefully I’ve explained my question correctly. Is anyone aware of a way in which I might be able to achieve this? Thanks in advance
×
×
  • Create New...