Jump to content
SAU Community

R33 Front Seat Repair/adjustment (tilt/recliner)

niZmO_Man

By niZmO_Man,
in General Maintenance

 Share

Recommended Posts

niZmO_Man Grand Master

niZmO_Man

Posted
Posted (edited)

Hey guys, I got R33 front seats, the passenger side back rest, when reclining, locks way too low. I've opened up the side plastic cover for a quick look to see if there is a quick way to fix it. I'm thinking the tilt adjustment locking mechanism needs to be adjusted, so I was wondering if anyone has experience with it and know how to fix it. Thanks in advance

Pic:

DSC03446.jpg

Ignore the driver's side, the passenger side backrest is at most upright (i.e. when it first locks)

Edited by niZmO_Man
(B1) MR_fanny Grand Master

(B1) MR_fanny

Posted
Posted

theres a big tilt knob on the passenegers isnt there? someones manually tilted it to its limits via the manual knob, you just have to unwind it and it should be back to normal. ive taken my stock seats out but im pretty sure thats how you fix it.

niZmO_Man Grand Master

niZmO_Man

Posted
  • Author
Posted

Hey thanks for the reply.

There are no knobs, it's the lever-spring adjustment. I did find out the problem but, the 'arm' that goes to the backrest is bent, so bashing that straight-ish sort of made it better. Gotta straighten it out more it seems.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing


  • Similar Content

  • Latest Posts

    • RB335
      C-red tuning?

      By RB335 · Posted

      Seemed to be good when Jeff owned it but they did a shit job on my car, probably worth a think before spending 10's of thousands of dollars where they might be cutting corners
    • Rezz
      DeAgostini 1/8 scale BNR32 Nissan Skyline GT-R Nismo

      By Rezz · Posted

      Starting with issues 1 - 5, we have already run into a problem...!  Issue #4 contained 2x front brake calipers, instead of 1 caliper and 1x steering knuckle. Will have to call DeAgostini on Monday to sort it out. Anyway here's some photos.  Issue #1 is the front bumper, headlights and number plate. Issue #2 is the front wheel (with "We produced with spartan air." text on the centre cap!) and tyre, the front lip spoiler and cylinder head cover with ignition coils under the centre cover... which will never be seen again. Issue #3 is the bonnet and cylinder head. Issue #4 is the front strut, brake disc (with laser etched metal discs) and brake caliper. I stopped here because of the issue with the missing steering knuckle.  Next update will be #5 - #10 in a few weeks.
    • Rezz
      DeAgostini 1/8 scale BNR32 Nissan Skyline GT-R Nismo

      By Rezz · Posted

      DeAgostini is one of a few companies that release quite large (the largest commonly available size actually) 1/8 scale models in a series of weekly issues over 100 - 110 instalments.  They release different models for different markets and DeAgostini Japan have release the BNR32 Skyline GT-R Nismo last month. I've made two of these 1/8 scale sized cars (one an R35 GT-R from 2012 - 2014, the other I'm just about halfway through, a BNR34 Skyline GT-R from the 2Fast 2Furious movie) so when this R32 was announced there was no way I could ignore it as it's my favourite out of all Nissans.  Each issue costs around $20 so it costs about $2.2K when completed. I suppose it is very expensive for what it is, but the quality and details are really very good, and there are many "gimmicks" like fully functioning exterior and interior lights operated with a remote control, working steering, all doors/bonnet/boot/fuel lid open and close, the side mirrors fold in and it even has a speaker for the engine revving sounds when you turn the lights on.  Each issue comes with a magazine that tells the story of the BNR32 Skyline GT-R Nismo from the first design stages of the BNR32 to Group A homologation and the various racing version that were run in the Japanese Group A and JGTC, and Australian Group A.  So I plan to update the build in this thread 5 issues at a time.  https://deagostini.jp/r32/?srsltid=AfmBOooKjxDc4EUK2rmXqMBPgyHfFJ24s4oEPJBNpnF-lFlsRoW0PE6P
    • Predator1
      Billet Merge Collector for manifold

      By Predator1 · Posted

      As per title.. has anyone used so far? Keen to hear results, comparisons. In the market for a new mani for my new turbo. Any issues cracking?
    • MBS206
      Help Understand GTT Boost Setup

      By MBS206 · Posted

      Re read everything that has been written about this in this thread.. Let us know if you're still confused.
×
×
  • Create New...