Jump to content
SAU Community

Recommended Posts

Hey all have the following parts up for sale

Pretty much brand new 25mm Bolt on spacers, 5x114.3 used one to see how my wheel sits thats it

its a pair, also included are the hub rings for the wheels

$150

R33 S2 Door trims, driver and passnger door

Immac condition, have no use for them

$100

R33 Dashmat, Black in color Brand new

$50

R33 S2 GTS GTST suspension

Standard, standard springs, no use for them

$100

JL Audio Tube Sub, perfect for just behind the seat in your daily driver

$75

Cadence 4Ch Amp, has tiny scratch on cover, pretty sure its 4x50w rms, works fine

$75

R33/S14/S15 Rear Camber arms, Toe Arms, Traction Arms, Complete set, Brand new unfitted, They are chrome, traction rods the chrome peeled a bit near the welding, could just respray them, got them from the usa, changed my mind and not going to mod my car further

$250

Whiteline Adjustable sway bar R33 Front, Complete in great condition

$100

Also have a brand new interior from the Group buy guy, is a Peachy color consisting of the following

Front and rear seat wrinkled

Gear boot, Handbrake boot, centre glovebox, and 30m of extra material, enough to do the whole door trims, dash, console, parcel shelf

Its an EOI atm and looking at offers

Will get pics up asap.....

Please dont hesitate to pm me or call me on 0430 129 882, Mario is my name

In Sydney

Edited by Cro_boy_Mario

Also have the following

Cusco Front Lower Brace in Immaculate condition $100

Cusco Adjustable Front Castor Rods in Immaculate condition $150

Will Take Reasonable offers

BUMP

JL Audio tube sub $50

Cadence 4Ch $50

Standard Suspension $50

Door Trims $75

Rear Adjustable Arm set $260 POSTED

Cusco Adjustable Front Castor arms & Front Lower Brace $260 POSTED

Cusco Adjustable Front Brace

Cusco R33 Adjustable Front Castor Rods

$260 Posted

25mm 5x114.3 Spacers, including Nuts and Hub Rings,

$160 Posted

I will do all the adjustable suspension parts and cusco items for $500 Posted....

post-24610-1231236927_thumb.jpg

post-24610-1231237047_thumb.jpg

Edited by Cro_boy_Mario

sent u an offer on that sway bar....i'll PM u with my phone number just msg me and i'll call u. i'll be out all day so might be able to come by for the sway bar

  • 3 months later...

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Yeah its bad eh. Ey! Watch your mouth. Yep, spot on. The rear's are always gone too though from brake checking. I had them perilously close to a tree that we had taken down. I think the tree peeps may have taken it. Either for a trophy, or accidentally.  
    • f**kin' yikes! That insulation is the shittest stuff I have ever seen. You need to do an insurance job on that f**ker, pronto. WRT to the washer cover, I would have said that there'd have to be some at a wrecker, then remembered that it's a BMW, and reasoned that every single wrecked one would have been tailgating and so the front end would be trashed.
    • Oh and I lost my headlight washer jet cover!
    • Ok, so I got myself some X1 wheels really cheap to try out, they're a bit different and I like them but they're really narrow (18x8) they are available in staggered 18x8/9 also but really hard to find.  I kinda dig them, but not as much as the F10 19's I usually run, so these go into the wheel pile.         As I mentioned in another thread, I got a new exhaust. It's an off-the-shelf stainless one that fits OH-KAY. I don't love the tips size and how far they come out the back, I think I might cut the tips off and replace with some smaller (~3") ones that don't extend as far. It sounds really good though, I'm not sure if its just in my head but the car feels a little quicker, more responsive.      I fitted an eBay special front lip. Surprisingly it fit perfectly and all holes lined up. Its a little rickety but I haven't put any double sided tape on yet, I want to clean the front bar up where it has scraped the road a lot and fil in the number plate holes (or, get body coloured wrap to cover them - is this a thing?  I'm not sure if I'll leave it gloss or pain it matte. I really like it though, I don't particularly like the front bar without it, I don't really like the M-Sport and to get anything else is just too expensive. That said, I might need a new one now anyway as I dropped the car onto the jack after forgetting to put ramps under the front wheels. It bent a lot and while it did go back to normal after I got the car off the jack, I do fear I have not done it any favours.    Lastly, my headlights died. Different problems in each. They have gotten much dimmer over the past year or so, I put new (uber expensive) OSRAM bulbs in them but to no avail. One of them pointed at the ground and the other just kinda did its own thing with light working sometimes. Yeah, check this 18 year old BMW headlight wire. I reckon I know why they were stuffed.            BTW, the yellow and black is the power to the Xenons. Yikes. I hunted around an researched my options here. I would have loved to just get a replacement harness but not a thing. My car has adaptive headlights, that is they rotate left and right with the steering wheel. Good condition used adaptive xenons were over $700 each, non adaptive were around $400 each, but I couldn't help but think that they're all around 18 years old now, surely they'd have the same problems. So I looked at newer LCI headlights but they were even more expensive and I couldn't confirm that they'd be plug and play with lots of people having lots of opinions so not worth the risk.  I ended up getting brand new Chinese headlights from MARS. They're very close to OEM with only the angel eyes being a bit different. I didnt want crazy turn signals or sharp DRL's or anything. Not my bag.  They're not adaptive, I thought thats a feature I wouldn't really miss. So I coded that out.  The lights are awesome, they look so nice and they take so many years off the car. The angel eyes look great and the headlight brightness is ridiculous. I was so used to the old ones, I didn't realise just how bad they were. The new ones use the OEM bulbs, Xenon ballast and leveller motor which I was happier with. The only issue with them is that the rear cover is held on by SEVEN screws. This will be a nightmare to get to and open when I need to change bulbs.   
×
×
  • Create New...