Jump to content
SAU Community

Recommended Posts

RDA Rotors group buys is back. All discounted GB prices will be quoted to you via pm and is for your eyes only, as RDA also need to protect the interests of their authorised dealers/retailers. For those who are new to this Group Buy, please click the link on my signature to see previous Group Buys and the tremendous response they generated since 2006-2008.

There are two types of rotors on offer as below:

Standard Slotted Rotors

slotted_lr-web.jpg

Grooved Dimpled (Dimpled & Slots) - Gold Passivated - more rust resistance

goldie--web.jpg

More info can be found here: RDA Brakes Products

The following are the parts which I can get access to for most Nissans:

Sloted Rotors:

1. R32 GTS-t/Z32 300ZXTT: F=909S 280mm RRP $170, R=908S 297mm RRP $190 (Front can be used for S15 Silvias)

2. R32 GTR (early models): F=7926S 296mm RRP $305, R=908S 297mm RRP $190

3. R33 GTS-t/R34 GT non turbo: F=7693S 296mm RRP $305, R=908S 297mm RRP $190

4. R32 GTR (late model)/R33 GTR/R34 GTR: F=7701S 324mm RRP $355, R=7702S 300mm RRP $355

5. S14/S15 Silvia: F=909S 280mm RRP $170, R=906S RRP $165

6. R34 GT-T turbo: F=7957S 310mm RRP $355, R=908S 297mm RRP $190

7. V35 Skyline / 350Z touring non-brembo: F=954S 296mm $POA, R=7657S 292mm $POA

Grooved & Dimpled Rotors:

8. R32 GTS-t/Z32 300ZXTT: F=909G 280mm RRP $305, R=908G 297mm RRP $285 (Front can be used for S15 Silvias)

9. R32 GTR (early models): F=7926G 296mm RRP $440, R=908G 297mm RRP $285

10. R33 GTS-t/R34 GT non turbo: F=7693G 296mm RRP $465, R=908G 297mm RRP $285

11. R32 GTR (late model)/R33 GTR/R34 GTR: F=7701G 324mm RRP $575, R=7702G 300mm RRP $525

12. S14/S15 Silvia: F=909G 280mm RRP $305, R=906G RRP $285

13. R34 GT-T turbo: F=7957G 310mm RRP $465, R=908G 297mm RRP $285

14. V35 Skyline / 350Z touring non-brembo: F=954G 296mm $POA, R=7657G 292mm $POA

15. V35 Skyline / 350Z track BREMBO: ONLY AVAILABLE AS EBC GROOVED F=GD7122 324mm $POA, R=GD7123 322mm $POA

Can also get rotors for the following cars:

- S13 CA18DET/SR20DET

- R33 GTS non-turbo

*) All RRP prices above are per pair, GST inclusive however they DO NOT INCLUDE delivery costs.

In addition to rotors, I am now officially offering EBC Green/Red/Yellow pads to suit most Nissan cars above. Please pm me for quote.

Deliveries all around Aust in approximately 5-10 business days via road courier (organised by RDA). No pickups available as they'd rather send everything out to keep it simple rather than mocking around with orders and separating pickup and deliveries.

Link to comment
https://www.sau.com.au/forums/topic/251349-rda-rotors-ebc-pads-group-buy-2009/
Share on other sites

  • Replies 447
  • Created
  • Last Reply

Top Posters In This Topic

Group buy prices are lower than what's posted in the 1st post above (RRP). those posted prices above are still exactly the same with the 2008 thread. For special group buy price go with the lower prices that's quoted through your pm...

How can i upgrade the rotors in my R34 25GT ?

I need slotted rotors.

Will the GTT ones fit ?

MRXTCZ

Unfortunately there were a few R34 NA owners who came up with different rotor size on their car, so we still unsure which ones will fit at the moment, until someone have a spare R34 NA rotors and can measure the diameter, inside hub diameter, inside hub depth, and other measurements, etc. Oh, and of course if it's coming from an R34 NA coupe or sedan and if sedan is it a GT, GTX or something else?

Are the 34 GTT rotors still reground GTR rotors or are they producing proper one to suit a R34 GTT?

Not anymore, they have a proper part number now. See first post:

6. R34 GT-T turbo: F=7957S 310mm RRP $355, R=908S 297mm RRP $190

and

13. R34 GT-T turbo: F=7957G 310mm RRP $465, R=908G 297mm RRP $285

Group buy prices are lower than what's posted in the 1st post above (RRP). those posted prices above are still exactly the same with the 2008 thread. For special group buy price go with the lower prices that's quoted through your pm...

Sorry, I shouldn't ask stupid questions late at night. All clear now.

Slotted Rotors:

4. R32 GTR (late model)/R33 GTR/R34 GTR: F=7701S 324mm RRP $355, R=7702S 300mm RRP $355

6. R34 GT-T turbo: F=7957S 310mm RRP $355, R=908S 297mm RRP $190

Grooved & Dimpled Rotors:

11. R32 GTR (late model)/R33 GTR/R34 GTR: F=7701G 324mm RRP $575, R=7702G 300mm RRP $525

13. R34 GT-T turbo: F=7957G 310mm RRP $465, R=908G 297mm RRP $285

Had a slight mistake, Groovies RRP price for R34 GTT front 7957G should be $575 = 7701G, not $465.

Same with Slotted 7957S = 7701S price

GB price of course is a lot lower than $575

Update to Batch 42 orders:

- TokyoTaxi (payment cleared)

- blk180 (payment cleared)

- zZzDanzZz (waiting for payment to clear)

- bigbadbob (waiting for payment to clear)

Mines a 25GT Coupe..

So what sort of measurements do you need.

List them out exactly.. and i;ll see what i can do.

MRXTCZ

Hey i helped with the sizes for the gtt im not sure if these will be wats needed fully but if u look at this link on page 10, post 199 u will see wat i done 2 help with the sizes. Hope this helps with getting u rotors. http://www.skylinesaustralia.com/forums/Rd...html&st=180

Thank's David. That was the GTT (turbo), what we need now is from R34 GT (non turbo)

MRXTCZ, if you can get me measurement (preferrablel all in mm):

Measure for your front rotors (R34 NA non turbo)

1) Rotor overall diameter

2) Rotor thickness

3) Rotor hat height (you can measure this from where the hub's hat meet the disc rotor surface, and adding the rotor thickness will give you the total rotor hat height)

4) Centre hole diameter of the rotor's hat (i believe all Nissan will be 68mm)

5) turn the rotor over, and measure the inside hub hole diameter

Do the same measure 1-5 above on your rear rotors (R34 Na non turbo)

See picture attached below, if anyone can do it I will take this forward...

You can save the picture, add your annotations to it and send it back to me via pm or post it here. Also don't forget to mention if your R34 GT NA is a sedan, coupe. Based on what people has told me, I am expecting to see different size for coupe and sedan, and potentially 2 different sizes for sedan depending on the grade... which is why it's getting a bit confusing...

PS: also include mention if your front and/or rear rotor is ventilated or solid disc

post-328-1231842526_thumb.jpg

Guest
This topic is now closed to further replies.



  • Similar Content

  • Latest Posts

    • Ok glad you clarified on the frenchy’s options , I was worried about if my oem hoses would fit the new compressor or not if I just bought the bracket/compressor kit ,  didn’t realize they also sold a larger full conversion kit. Hmm may just go oem in that case then to make it easy only because I plan to sell this car to upgrade to a 32 GTR or 34 GTT.
    • Right, here's a video of the basic operation at least.  This is what you can expect day to day when you turn the car on and it boots from standby.  The only thing from a media point of view I haven't gotten working is for it to autoplay plexamp when it turns on from standby (it works from cold boot) but that's more of a plexamp problem as it will autoplay other music players.  Also attached is my one stray cable.  It's part of the screen's wiring adapters but there's just nowhere for it to go in my car.  I've just now done a bit of research and found a matching port on a 2010-2014 head unit with BOSE.  Mine has no BOSE so that's that case pretty much closed I think.  Plugging in the Infiniti AC panel basically did nothing for me, so that's a dead end as well.  Next port of call is to mess with this CANBUS module and see what I can find from it.  I found this resource containing the DBC files for a 2010+ G37 : https://github.com/icecube45/Dash_InfinitiG37/blob/master/InfinitiG37.dbc I'll now have something to go from when I try to extract my CANBUS data so I can see if the HVAC Mode, Fan Speed, Temperature, etc. match and also the gear shifter position.  It's a pretty big assumption that it's just mismatched CAN signals but considering all the devices in the CAN network are talking to each other (AC can be fully adjusted just with no info on screen) it might be a safe one.  I will report back WhatsApp Video 2025-02-26 at 12.49.10.mp4
    • Thanks for that Paul.  Do you think if I posted a picture you'd be able to remember where it went? 
    • Sorry Duncan, I didn't get a notification for the replies.  Thanks for responding!  It's a full Android device, but does allow you to use CarPlay/AA as well.  This is the one I bought from NaviRS on AliExpress: https://www.aliexpress.com/item/1005006368602668.html?spm=a2g0o.order_list.order_list_main.111.59aa1802JDzQ0E - the 2K 8G-256G CAM variant but it seems to have gone up by £170 since I bought it!  My purchase was £307.14.   It's not the fastest thing in the world but performs perfectly adequately.  It stays on standby unless I disconnect the battery and let it power down, then it's just a fairly standard Android bootup time from cold.  The DSP Equaliser is very nice and made the standard stereo system sound pretty decent compared to the stock screen.  Perhaps I can take a video of it when I get a sec. It *allegedly* supports the reverse camera, but I'm yet to get that working.  It has options for reverse cam (a camera unit can be bought separately) or 360 cameras (also bought separately).  To be fair it doesn't seem to detect that the shifter was put into reverse but I'm working on a theory about this as well.  At the moment I'm going without which is a bit annoying considering the car is an absolute canal barge but so far I haven't caused any damage I'll grab a picture of the wire I'm missing later today when I can get outside.  My theory, by the by, is that not only is the head unit different, but the CANBUS network has different signals for the different years.  I think this because I have a spare AC panel from a newer Infiniti G37 (as opposed to my Nissan panel) which wouldn't control anything except the volume when I had it wired up with the stock system.  I'm going to throw it back in and see if the screen will respond to it.  I've just ordered an arduino CANBUS module so I can have a look at the signals going around the car and see if I can spot anything.  I'm thinking if I can work out what it's expecting vs what it's getting I might be able to translate and relay the signal back but so far just a theory anyway. I also found this on my travels, so far the only one that specifically matches my car: https://www.aliexpress.com/item/1005002822934280.html?spm=a2g0s.imconversation.0.0.33433e5fgttovi If you look at the picture of the before, it has the card reader slot, and the picture of the head unit is exactly the same as the one pictured in my original post.  I asked if they sell the cables separately but sadly they won't.  I didn't want to just buy this one because it's a super old Android version and only dual core - likely slow as hell. 
    • As above, you did refill the coolant and burp the system before running it again didn't you?
×
×
  • Create New...