Jump to content
SAU Community

Recommended Posts

will follow up...

However there are no correlations to where you are, you can be in Melbourne yet people in WA may get theirs first because when RDA receives the order if they know the WA branch has a stock close by it gets shipped directly from there instead from Melbourne warehouse.

Most likely you were not home when the courier tried to deliver, this had been 99.99% of the cases over the past 3 years

  • Replies 447
  • Created
  • Last Reply

Top Posters In This Topic

I work from home so I'm always here .. besides, even if I had just popped out for a minute (which is unlikely) wouldnt they leave a card ? If you could give them a ring and find out what's happening that'd be great.

.... Keep in mind that general OEM rotors normally have a lifespan of around 30,000 - 40,000km. My front stock V35 rotors were lipped and were already under the minimum thickness when the car landed with 49000km, so I would have estimated the previous owner in Japan didn't replace the rotor at 40000km service which was when it was suppose to be replace. I would expect RDA rotors also have a life expectancy around 30,000-40,000km just like OEM rotors.

I am not trying to be inflammatory, but when I got my R34 it had done 86,000km, and I am quite certain the rotors had never been replaced due to rust and lack of evidence of any mechanical work ever done to/around them. My car has now done 155,000km and they are on their way out but still going. So I have to disagree that OEM rotors are good for 30,000-40,000km.

Either way I am changing to the dimpled/slotted gold passivated rotors, which arrived the other day, and they look bloody awesome in the box!

I haven't fitted them yet as I am waiting for my QFM brake pads and brake rebuild kit to arrive, to do it all at once, along with some braided brake lines and custom caliper paint. :ermm:

as it happens I'll be at a different address from monday for about 10 days .. any chance I can have you give them the new address for delivery? It's also in Sydney.. so if they haven't sent it out yet, it'd be much better if I can get it at the new address.

as it happens I'll be at a different address from monday for about 10 days .. any chance I can have you give them the new address for delivery? It's also in Sydney.. so if they haven't sent it out yet, it'd be much better if I can get it at the new address.

It is probably already on its way. What I'll do is I'll grab the consignment number and you can ring the courier with that consignment number.

It's a lot easier that way.

Yeah mate I am getting the A1RMS.

Delta what do you think of the HPXs? They recommend I go A1RMS for a mildly hard driven street car (no track time).

my understanding is A1RMS is for track mainly ... ie. they're efficient at high temps. Since I don't do track, I've gone with HPX as they work better at lower temps too ie. street.

only if Falcon's PCD is 5x114.3mm by factory standard, and if Falcon's centre hole diameter is the same or bigger than Skyline. if not then it will be up to the end user to modify their hub to fit.

Reason is they don't do custom made rotors unless you're willing to buy a minimum of 120 pieces (60 pairs) in one order

Guest
This topic is now closed to further replies.



  • Similar Content

  • Latest Posts

    • Oh, that's grim. Something bad has been happening there.
    • Put an endoscope down the hole and saw this. Not quite all around the bore but a good 60% at least. Chin to the chest and towards further disappointments I guess.
    • 2 does "sort of" applies, maybe......but looking at what parts would be needed for the swap to get engineered, registered, and insured, and basically that's everything under the car, the modifications the make it legal would be problematic and horrendously expensive, all for a street car that just cruises around and hits a few twisty roads on the weekends Also, from looking at the NSW rules and Regs, with all modifications that is required just to make the car safe and not twist itself to pieces, and then actually get registered for street use, may still be impossible nowadays As for 1, when you add in a fresh engine, fresh transmission, rear cradle and diff, tailshaft, suspension, brakes, cooling, and all the other fabrication required, your probably looking at up to $100k to do it right, all for a 20 year old MX5 that is over engineered and you would never be able to actually use the power it has on the street, much like your beastie, which I love, but you actually track that thing and can use all of its powers in anger, in a safe environment  Hell, the old Bogan Cruise Ship had more power than I could use on the street, and in hindsight, I went a bit silly on that thing, it didn't really need the 500hp it had for what I actually used the car for, it was fun, but basically unusable on the street if you value your licence  As for cams, yeah, I'll probably book it in for them to get installed and tuned soonish, like next month after MX5 Mania are back at work....... and yes, I've already sent a email to bin the turbo quote and quote instead to install cams and a new Fluidampr balancer that will suit the 2.5 better than the OEM 2.0 balancer that is swapped over for the 2.5 install, as the balancer needs to get pulled to time the cams it's a while your in there sort of thing I did think a bit about flex fuel for a laugh, but being na, and no where really around locally anymore to get E85, I've binned that idea, so no sweet sweet corn smells are set for the car I wish E85 was more of a standard fuel, it's better for the environment, better for tuning, plus that sweet sweet smell we all love As for fitting in the family, that's not needed, as everyone in the family already owns a car that can seat 5 humans comfortably enough, the MX5 is "my toy" As for buying a car that is already built, nah, I would rather pick and choose my parts, I enjoy the process, and in the big picture, the additional cost is well worth the enjoyment, and the occasional frustration, I get out of doing it, albeit with other people spinning the spanners, and me, just paying the invoice 🤣
    • Excuse me, but 2) does apply 1) Would also apply if you consider how much is spent in the alternatives. Also there's the option of 3), buy one pre-built that you can put your family in (it's me, it's my car)   That said, I went on a ~500km drive the other day. I didn't use anything more adventurous than 3rd/4th gear at about ~3000RPM and 50% throttle and I was going as fast as anyone has any sense doing on a public road, with enough grip to the point where I didn't want to go any faster. I was obviously under the limit of the current car etc etc. MX5 with 2.5 N/A to achieve the same speed would be more fun for any road scenario. Maybe consider cams. I wouldn't boost it. The use case is just not there and it won't actually make the car more enjoyable unless you really do plan on wringing gears from 1st to 3rd (at least) at 100% WOT on a public road to 150+kmh.
    • Great if: 1. You had all of the money for everything else that is required  2. Lived in a country where you could actually do this and drive it legally on the road Sadly, neither applies to me As for the turbo, I am having second thoughts, mainly for engineering/registration legality reasons and insurance  Not saying I've finished doing stupid things that I probably should do to the MX5, but boost, and V8 engine swaps isn't on the cards Strange, but true 
×
×
  • Create New...