Jump to content
SAU Community

Recommended Posts

OK so im thinking of upgrading the standard speakers and installing a small amp.

Just wanting to know if there is a stock amp alreay that i can 'upgrade' or if the wiring already runs to the back for an optional amp (i wish!) or if its straight off the head unit??

i dont want to go huge or add subs, but i think some nice splits in the front and rear doors will be good. but i think attempting to run them off the stock head unit will be a bad idea. dont want to damage it

thanks guys!

Link to comment
https://www.sau.com.au/forums/topic/251378-m35-stock-stereo-non-bose/
Share on other sites

You won't (or shouldn't) damage the stereo if you install some new speakers, Ian. Instead, if the internal amp is not powerful enough and distorts, that will kill your speakers. Because the speakers aren't getting a "clean" signal from the stereo, they can't produce a clean sound, and the more it happens, the more damage occurs to the speakers... It's like fuelling your car with dirty and low-grade fuel.

Oh, and if the standard stereo doesn't have RCA outputs on it, just buy an amp with high-level inputs on it - it's not a perfect solution, but it's not like you're going to be entering your car in SPL or sound quality competitions, is it?

I did not notice any wiring for an amp when I was installing the PA11-NIS. Having said that, the stock unit can get quite loud without any distortion - so perhaps I missed it?

There are no RCA jacks in the stock unit.

However, if you grab a PA11-NIS, not only can you play/charge your ipod but it also has L/R RCA jacks. :laugh:

btw, why is it that the day I go to install my ipod the G35ipod site was down? Murphy's Law I suppose :D

Edited by iamhe77

yeah its only in a dream if any factory head unit had RCA outputs lol

those line level to RCA converters are pretty much shit, full of noise etc. so yeah an amp with line level inputs will be the go!

anyone know where the factory amp is located for the bose optional system? im only assuming it HAS an amp, maybe the stock head unit has a bigger amp inside it?? or maybe its just better speakers?

i can get the bass to distort on the stock speakers easy, they arent meant to be THAT good. and if i put the splits in, they are rated at 50watts (i think) and i rekon the factory speakers are probably something like 12watts? that will blow up the stock head unit if i run the splits. ill get some nice DC heading their way :)

can anyone confirm if the door speakers are 6" or 6.5"?? ill go to jaycar and buy some stuff and make a project over the long weekend...........

yeah its only in a dream if any factory head unit had RCA outputs lol

those line level to RCA converters are pretty much shit, full of noise etc. so yeah an amp with line level inputs will be the go!

exactly. that means the source needs to be clean as well. the stock clarion (bose) unit HAS line level output. mind you that unit will need a line driver to make it work properly as it has about half the voltage needed to drive an amplifier properly.

anyone know where the factory amp is located for the bose optional system? im only assuming it HAS an amp, maybe the stock head unit has a bigger amp inside it?? or maybe its just better speakers?

rear quarters. pass side. if you do have the bose setup in there then you have to work out the EQ curve applied to it and also be aware that the speakers may not be standard impedances. bose use really low impedance speakers in some applications.

i can get the bass to distort on the stock speakers easy, they arent meant to be THAT good. and if i put the splits in, they are rated at 50watts (i think) and i rekon the factory speakers are probably something like 12watts? that will blow up the stock head unit if i run the splits. ill get some nice DC heading their way :)

you are running out of power you know. buy a set of VERY efficent splits and you will hear the difference almost immediately.

can anyone confirm if the door speakers are 6" or 6.5"?? ill go to jaycar and buy some stuff and make a project over the long weekend...........

6.5" on a custom plate. front and rear doors are the same speaker setup. when doing splits make sure you have a thinish tweeter. that way it fits behind the stock panel. you will have to do a custom mount to keep it in place. put the crossover towards the rear of the door as there is a void there and it fits nicely.

I have one I'm working on currently that I'm doing a full setup on and thats the part I'm working on now.

my stock system was awsome with cd's ...

upgraded my head unit caust i wanted AM/FM radio .

radio sounds really clean and crisp but cd's no bass. might just hook up a sub to fix that.

so be very picky about it, no need to rush into hundreds of dollars worth of crap products

thanks chris, as per usual, youre the man! exactly the info i was after!!

im picky about the way my music sounds, i dont need big bass, but i like some depth to the music and the stock setup doesnt completely do it for me. My old old S15 on the other hand was perfect.........

I'll start popping images up of the one I have currently. I'm curious on how this one is going to turn out myself.

I need to get it running first. the doors are done as of today so its time to do a LOT of wiring. then more wood work..

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • From when I was looking at getting the 86 engineered for the turbo, the joint said to put in a few euro 5 or 6 cats, then tune the car on a nice clean E85 tune When I was looking at a turbo for the MX5, it was basically the same thing, a couple of cats and a nice clean tune Although, it will depend on the year of the Jeep IRT emmisions standards required, and what mods are done, especially if it has a newer engine installed that requires a higher Euro
    • Yeah - but it's not actually that easy. There are limits for HC, CO, NOx and particulates. Particulates shouldn't be a concern in any petrol engine unless trying to comply to the very latest Euro standard. But getting a tune right so that all the others stay within limits AT THE SAME TIME is not a trivial exercise. You couldn't possibly get it right by just guessing at the tuner's dyno, unless he had a 4 gas analyser up the pipe, which is not often the case these days. It used to be. Every decent shop that did "tune ups" (as opposed to tuning) would have a 4 gas analsyer. Perhaps there's still quite a few of them around these days. But most "tuners" are only watching O2 and power readings.
    • Slight segway but the most expensive part of the whole thing which I would have thought would only be required for an engine size/type swap, not a VIV test, is emissions testing.  That's when you get into the big bucks.  I can't remember the exact price now but I got quotes for the GT-R based on swapping to RB30 (not that anyone bothers doing it legally anymore...) and it was around $4500 just for that alone.  The guy that does them manipulates the tune on the vehicle to make sure it passes.  The cheaper option is to book into Kangan Batman Tafe (I think that's where it was) and hire their tester.  Allegedly you're not allowed in there with the car though so not in a position to tweak anything to make sure the vehicle passes.  I'm sure in this day and age of ultra tuneable ECU's you could get the tuner to program a special efficiency (clean) tune that emits the lowest amount of particulates possible that would pass the test.  It might only make 50kW's but as long as it passed who cares!
    • I'm sure he has left signs, or, he is looking down, laughing That's my cunning plan for when I leave, lots of half finished projects, with no rhyme or reason of where I was actually up to, just to keep everyone on their toes
    • Does that price include the rack time to straighten the frame and body and replacement of parts and paint, as well as the noise and emmisions testing  The last engineering certificate I had done, albeit about 15 years ago, was around $1000 for a few inspections and the certificate 
×
×
  • Create New...