Bolt Distance, For Pattern 5x114,3

[brother_david]

Hey!

Hope someone can please help me with this!

Im gonna make some spacers for when i fit the wider fenders on my GTST and now i need to have the distance , not the pattern (5x114,3) between 2 bolt, or the radius from the center of the hole to the center of the wheel. Hope i could make myself clear

I've got my car in a garage a fair bit from where im currently at, and im actually to lazy to travel back and forth

Cheers!

[32TAXI]

just buy some hub centric spacers!

All different thickness and cheap! not RWC!

Edited January 7, 2009 by RED513

[blind_elk]

The radius will be half of 114.3mm.

114.3 is the Pitch Circle Diameter - the diameter of the circle that the stud holes sit on.

[brother_david]

Hi, thanks for your answers!

Until i get my hands on some GTR-offset wheels im gonna use rather thick spacers, 30-35 mm thick. I can machine these myself and i prefer to do that, and to drill only 5 holes (gonna use longer race bolts instead of the factory ones).

I need the radius to the center of the circle, and unfortunatly that isnt half of 114.3 since its 5-stud But i'll go out to the garage and measure it to get the right figures