Jump to content
SAU Community

Recommended Posts

Alright it's not a GT-R but for a laugh...

SR20DET

Forged bottom end, cams etc. Still a 2 litre, ID2000's 3 x 044's

Precision billet 6265 turbo

It has 20psi @ 4500rpm

486kW at the rear wheels @ 39psi on E85

Ran 9.6 @ 144.6 on radials with 453kW so keen to hit the track again

No nitrous

Alright it's not a GT-R but for a laugh...

SR20DET

Forged bottom end, cams etc. Still a 2 litre, ID2000's 3 x 044's

Precision billet 6265 turbo

It has 20psi @ 4500rpm

486kW at the rear wheels @ 39psi on E85

Ran 9.6 @ 144.6 on radials with 453kW so keen to hit the track again

No nitrous

I call shotgun PJ. U know ur allowed passengers now at WSID. We might have to lie to them about u running slower than a 11.9 ;)

just like u used to keep sneaking in and running under 10.9s

+1 for the 400kw+ club

680 4whp ( on a hub dyno ??? ) what ever that is ? don't want to start a dyno war, but I'm sure its over 400wkw

HKS step2 2.8 stroker, full counter crank and rods kit, CP pistons.

Garrett TO4Z .84 rear

, Jun 272 in and ex cams, 10.8mm(?) lift, special retainers and all the jazz needed to support the cams and high revs, heads extensively ported.

Current street setup with wastegate plumbed back into HKS 4inch exhaust

1000cc HKS injectors,

Motec M800 ECU

+1 for the 400kw+ club

680 4whp ( on a hub dyno ??? ) what ever that is ? don't want to start a dyno war, but I'm sure its over 400wkw

HKS step2 2.8 stroker, full counter crank and rods kit, CP pistons.

Garrett TO4Z .84 rear

, Jun 272 in and ex cams, 10.8mm(?) lift, special retainers and all the jazz needed to support the cams and high revs, heads extensively ported.

Current street setup with wastegate plumbed back into HKS 4inch exhaust

1000cc HKS injectors,

Motec M800 ECU

507awkw

there was some talk of lumpy cams earlier in this thread, this is the idle of the above set-up jun272's

I fell in love with it..

its amazing how much poppier big cams sound in a 2.6ltr - the 3ltr muffles most of that sound

Also did you actually port the manifolds or extrude hone?

I'd like to get mine extrude honed to see how much difference there is

we spoke about this before stevo - i wanted to have mine done but not after the quote i got for over $1000

there was some talk of lumpy cams earlier in this thread, this is the idle of the above set-up jun272's

I fell in love with it..

ive got bigger cams than that and people reckon it sounds like a rotor at idle. Even a rotor workshop owner told me lol. Ill post a sound vid when its actually running again.

in 2021 :D

its very close to being ready to go, just need to wire up the new ecu setup (only recieved that today) now and the car loom, done a few changes and its actually in a bloody gtr. Engines been sitting on a stand for over 2 years now while building the car up. I might paint it green too ;)

its amazing how much poppier big cams sound in a 2.6ltr - the 3ltr muffles most of that sound

Bullshit!

Dan pulled up at the servo and some dude asked if we had a 13B in it. Coulda been blood if I was there. :blush:

F#@king hell Noel! I knew you had a nice GTST but that is insane. Top stuff!

What cams do you have?

Running tomei 10.25 lift with 270 degree inlet and 260 degree exhaust Dave. Going in tomozz for our first e85 tune, should be interesting.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • I haven’t taken them out of the cases yet    inside the box is this packaging which is pretty much like a massive blister pack 
    • Purchased a NC MX5 a while ago Basic suspension mods done, BC coils and Whiteline sway bars  New DBA calipers, discs and pads Added some 17 x 8 Konig Decagrams with 215/45 17 PS5's Added some typical NA bolt on's, i.e. full exhaust and intake  Added 0.5ltrs with a MZR2.5 swap, nice bump in torques  Found a detachable hard top which is locked in for a colour match with my local paint shop in Feb 25, this also includes some PDR as it has received a few love taps from parking in the local shops when in the hands of my Minister for War and Finances, me, I park nowhere near other cars and typically park on the street The little thing is awesome, I drive it everywhere, it handles like a dream whether I'm up it or just cruising  But now,  because I'm a idiot, I keep looking at turbo kits....... did I mention I'm a idiot Why is dose so appealing  All of the NA 2.5 glory, well.......until sometime in 2025 anyway....🤪  
    • I would not be surprised if you are the only person on earth that has the interest/desire to do that lol.  The Haltech base map is a really good starting point, the car will fire easily and drive very well, even on mild boost levels. To me, following your advice sounds like some sort of ancient Chinese water torcher lol (this is not an insult Josh, never change <3)
    • Those car show concepts from the 2000's and 2010's like the Floria and IDx were brilliant and should've gone ahead, at least one of them. But neither Honda nor Nissan are thinking about affordable performance any more, which is truly sad.  Even if Toyota's liquid hydrogen ICE development reaches the point where it's commercially viable and the infrastructure to support it, Honda/Nissan would have to wait until Toyota allow fee access to their patents to offer it with any smaller performance models they released to take advantage of it.  
    • A sporty manual RWD coupe with a IL4 Honda engine would only be a good thing I assume we won't see anything released for a few years though, unless informal talks and designs have been going on for a few years,  and due to the current, and future, emmisions and safety requirements, I assume anything "sporty" they would do would be at least some hybrid thingie And hopefully anything they are thinking of has nice lines, without lots of plastic and fake bits hanging off it like that horrendous FK8 that looked like it was designed by a 13 year old The other issue of course in the current market is cost, currently the type R is around $70k, a twin is around $50k Meh, I'm old and grumpy and would rather buy a older model car and waste my coin on that than buying anything currently available new  
×
×
  • Create New...