Jump to content
SAU Community

Recommended Posts

What lines are people using for Fuel, E85 and such, Speedflow don't do a PTFE line that is not braided FFS !!

I know Aeroflow have the 250 series but I just want plane old black hose that will resist E85!

Also, has anyone used those in boot Powertune Fuel cradles to any effect ?

Cheers,

Mitch.

  • 2 weeks later...
Keeping this thread alive.


SS-4 Alpha ptotoype 1, Working with a 2.5L Rb25det and Tomei 264 / 8.9mm cams.


E85 fuel, externally gated.


This turbocharger made 465rwkws on 24psi maxing out 850cc injectors,


Thick yellow is from today, the rest is the controlled run. Ordered a set of 1200CCs, looking to crack 500rwkws.


power.jpg


boost.jpg

  • Like 1

What brand injectors did you opt for Stao, as in brand wise? Not those jecs 1200cc ones GTScott has been been saying seem to go alright? if so good value for the $$$. I so hope you crack that big 500kw mark.

Josh

  • 1 month later...

well, finally got there.....

dirty 30

256deg 9.15mm lift cams

greddy intake

1000cc injectors

haltwch platinum pro

1mm mls head gasket

spool rods/piston kit 9:1cr

spool awd adapter

6 boost mani

china gt42 bush bearing

4inch zorst

5 inch metal cat

tomei intank pump

98 octane from 7/11

444.8rwkw @19-20psi

post-37584-13827682162889_thumb.jpg

Yes on caltex eflex, pretty sure they are cos they are engraved 1200 on the side,,

Simonr32 is making 500kw with 1200's on e85......I'm stumped

Maybe tune is wayyy to rich?

possibly, but my result is 7/11 premium.

no ethanol.

yet.....

Yes on caltex eflex, pretty sure they are cos they are engraved 1200 on the side,,

Simonr32 is making 500kw with 1200's on e85......I'm stumped

Maybe tune is wayyy to rich?

On a hub dyno IIRC.

Yes on caltex eflex, pretty sure they are cos they are engraved 1200 on the side,,

Simonr32 is making 500kw with 1200's on e85......I'm stumped

Maybe tune is wayyy to rich?

Who tuned it?

Did u ask for safe tune? Or big numbers? I asked for as much boost as turbos can handle but mines not every day car , we shall see really soon what result is but I'm very sure it will be worthy of this thread lol

I personally said, "keep going until something runs out or goes bang".

will be calling monday to find out what duty cycle the injectors are at.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • I'm not up to date on the latest, but for basic modifications like pod filter, lower springs etc you can get a modification permit at the time of inspection.  For more serious modifications you will need engineering.  Intercoolers used to fall into the mod permit rule but its been a long while since i looked it up.   Either way you will be able to get it registered, just a case of $300 vs $3k . 
    • Hi everyone! I’m the new owner of a 1996 R33 GTS-T, I’ve purchased this car over from Queensland and brought it to Western Australia and I’ve found that there is a hole cut out in the engine bay for the FMIC that enters into the wheel well (fender liners are in the boot). For anyone that has had to get their car over the PITS here, will this be a major issue?   
    • Yeah I've spotted this one too, whenever it's lotto superdraw week and I'm browsing car sales dot com for my new ride They must be dreaming, maybe it's worth 150k for the link to Brock?
    • 100% accurate!  We are a pack of know it alls....  But, I bet people go to you when they have a problem! I've been on a bit of a clean up rampage too over the past month!  I've thrown more shit in the bin over the past 2 weeks than I have in the past 3 years combined! Anyway, it's all good fun being different! My wife sometimes does not agree!  
    • ADHD in all form isn't about "can focus, or can't focus" or is hyper active or isn't etc.   It's all a dysregulation. Either time feels to be stationary, or time just vanishes in a split second. We are either under focussed on the task at hand (as we're over focussed on our surroundings) or we have no idea an atomic bomb went off beside us as we're so hyper focussed and locked in on things.   Not to mention the rapid fire thought process. What it takes a "normal" process to think up a solution to a problem, ADHD will be able to give you 5 different ways to solve the problem, and the pros and cons of each. While we can be highly impulsive and lack the ability to "control ourselves" we can also become paralysed with the inability to make a decision for ourselves. While most of us have an OCD like requirement for perfection, we lack the ability often to remain focussed to get things to a perfect state. Those with undiagnosed ADHD as adults, can often find the last part actually stops them ever attempting to do things that they have the ability to do, as the reasoning is often "if I can't do it perfectly, it's not worth doing"   As for projects... Ha ha ha, I still need to take the other half of my wall trim down in the Fiance's office so I can paint it. Need to finish digging and running the back yard drains, my R33, getting the Ninja bike registered (now being sold), the moped project, fixing either of the lawn mowers so they're reliable, along with a myriad of other things.   It's why I've been going through lately and just being brutal and clearing projects off that I won't actually ever complete. IE, moped will go to the tip, or be given away, bike is being sold, Subaru project being sold, some parts for other projects given away. Or I've been making myself focus on one thing at a time, by ticking off the smallest quickest ones first.   There's also a reason by our mid twenties we seem to be "know it alls", as we've all been down some of the weirdest and oddest rabbit holes when you follow the dopamine trail. It's often also why we're more a jack of all trades, but not a master of one.   However, pretty much all of my hobby projects, in one way or another, all come back around to automotive. That's my zen area.
×
×
  • Create New...