Jump to content
SAU Community

Recommended Posts

yeah camber kit was installed as was rear subframe alignment kit .. could the rear subframe kit have something to do with this crappy traction issue ?

Unless i'm thinking of something completely different, the subframe alignment kit could have something to do with it. They can be installed in 3 positions, drift neutral or traction. I've heard from a few people if they've been installed in the drift position it made their cars quite slippery. Might be worth looking into.

  • Replies 50
  • Created
  • Last Reply

Top Posters In This Topic

Have you considered that during dry spells quite an amount of oil and sh!t gets deposited on the road surface. Then the road gets wet by rain. Oil and water don't mix.

Yes I have and i'm well aware of that. However this is not my first car ever. I drove a heavy 4WD before it as well as various sedans and I've never fishtailed in rain cornering at normal speed.

I'd personally say you may have some low quality tyres and expect too much of the car.

The GTR has Dunlop LeMans tyres, and they handle great in the dry, in the wet its a different story, they're not so good anymore, my suspension alignment and camber kit is done.

My suspension setup does great in dry weather, but been a front-heavy car I have lost the rear in the wet (accidentally of course) before, its very easy to correct though.

Shit tyres.

I had a set of LingLongs at one point, they would spin 4th in the wet and 3rd in the dry and also step out around corners with no throttle (2-way diff doesn't help heh).

My current tyres don't do any of that.

hmm I'll have to try different brand next time then .. but that wont be for another couple of years I reckon. I thought the Maxxis MAZ1's were pretty decent according to some reviews. I think some mag said they were better than some of the top-end tyres that cost like $450 a piece.

Cars been in the shop for a while ..havent had much chance to drive it since upping the tyre pressure. Will see how that goes first.. Thanks all for the suggestions

Check the tyres sticky, they show what tyres users here have used and reviewed....you will find some tyres are excellent in the dry and pretty terrible in the wet.

Check the tyres sticky, they show what tyres users here have used and reviewed....you will find some tyres are excellent in the dry and pretty terrible in the wet.

eg fed 595 SS LOL!

Unless i'm thinking of something completely different, the subframe alignment kit could have something to do with it. They can be installed in 3 positions, drift neutral or traction. I've heard from a few people if they've been installed in the drift position it made their cars quite slippery. Might be worth looking into.

hey guys can anyone confirm this or tell me how to check which position/setting my rear subframe alignment kit has been set to ??

Look at where the bushes are, neutral they will be in the same spot front and back. Traction they will be installed in such a way that the cradle points up at the front (to give more squat, so bushes will be under the cradle on the front and in between the cradle and chassis on the back). Drift they are installed to point the front of the cradle down (bushes between cradle and chassis on the front, and underneath cradle on the back).

Hope that makes sense ;)

hey man learn to drive or them tyres are just plain shit. get some decent tyres an try that, no point dyin to save 1500 bucks aint no good for you or another driver if you get killed. i've had crap tyres nankangs were no good in the wet got rid of them at bout 1500km an got some falken 452 (375/17's) bout $400 a tyre absolutley awesome in the wet. will only spin in the wet if your really tryin an can still corner fairly hard without lettin go at all an when it does it's usally fairly smooth an thats generally only when you do it on purpose.

  • 2 weeks later...

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • https://www.dezeen.com/2025/01/06/nissan-electric-r32-skyline-gt-r-godzilla-sports-car/   I reckon this is pretty cool. Lots of other Resto mods have turned to ev power.
    • hahaha @joshuaho96 the most action it gets is when I have to drive from West to SE VIC to meet the fam. Even then, it;s on highway cruising speeds
    • don't know anyone in this thread, but i just found it, read the entire thing in a few hours, realized greg is still posting progress, and just have to say, this is awesome. it looks awesome. 100% right about the Uras kit making it a pain to get on hoists...have the same kit on my 34 and it takes six 2x4s and race ramps to do it without taking parts off. this reminds me exactly of this thread. https://grassrootsmotorsports.com/forum/build-projects-and-project-cars/r63-amg-the-unicorn-of-my-destruction/110824/page8/
    • The only way to make that better is to weld on some bozozoku tips up past window height and roll with the cool kids.
    • I'd want an even MORE side on view. More or less you want to make sure the outlet is actually square with the outermost part of the bumper. Or you end up getting soot all over your bumper from your hektik exhaust. In any case, it looks pretty close. I think the way to fix this is probably more of an overhaul at an exhaust specialty shop if you want tips that are rounded off or sit nicely with the bumper but have proper clearance and don't move - Probably more of a redesign than a quick fix. I've pencilled in my own exhaust with its own various problems, pinholes, PITA fitment, and other issues and can see myself going to a shop and saying "JUST DO THIS BUT BETTER?"  Which is gonna work better than any more small fixes. I'm gonna chime in here officially with "from an outsider perspective this exhaust looks fine so this is self OCD probably" (which I also suffer from)
×
×
  • Create New...