Jump to content
SAU Community

Recommended Posts

engine internals

rb25det

built 12 months ago but done low kays ,consists of

acid cleaned and prepped block, new welsh plugs etc

balanced crank to suit new rods and pistons

Eagle H beam rods

ACL Forged pistons

Jun oil drive collar

ARP crank, big end, and head studs

N1 oil pump

new R33 water pump

new tensioners and nissan belt

tomei oil retrictors

head rebuilt with tomei poncams

tomei exhaust cam wheel

new NGK iridium's

Bolt ons

ETM high mount manifold HPC coated black

gt3582r-iw with exhaust housing HPC coated black

choice of either 18 psi or 24 psi actuator.

turbo beenie

ss braided lines both feed and return.

3 inch dump with 2 inch wastegate pipe all in 316 stainless

5 inch cat

PFC with inbuilt Boost controller

600 x 300 x 80 ASE front mount

brand new bosch q45 AFM

4 inch stainless intake

FPR with gauge

044 intank setup.

Trans

fully built box from MV Automatics

2800 high stall

stg 2 shift kit

includes all new custum clutches and kevlar band etc

this is my wifes car so was only ever boosted properly on the dyno.

either seperate for parts or sell car whole.

open to offers

Hey mate

I know you probably wanna sell the car whole, but would be interested in the Transmission if you do seperate it. Pm me details on price, locatation etc.

Cheers

Brendan

Hey mate

I know you probably wanna sell the car whole, but would be interested in the Transmission if you do seperate it. Pm me details on price, locatation etc.

Cheers

Brendan

no worries i will happily seperate the car if i can find buyers for a few of the major parts like manifold / turbo set up, engine , trans etc.once the big things are allocated i will strip all the parts and list prices for all the remaining mods.

I'm interested in some of the items but I'm located in the USA...do you have a problem with international postage? I have a FedEx account if that makes things easier for you. Thanks!

-Blake :P

rb25det

built 12 months ago but done low kays ,consists of

acid cleaned and prepped block, new welsh plugs etc

balanced crank to suit new rods and pistons

Eagle H beam rods

ACL Forged pistons

Jun oil drive collar

ARP crank, big end, and head studs

N1 oil pump

new R33 water pump

new tensioners and nissan belt

tomei oil retrictors

Short motor $3500

head rebuilt with tomei poncams $1500

tomei exhaust cam wheel (not installed) $200

new NGK iridium's

Bolt ons

ETM high mount manifold HPC coated black $1000

gt3582r-iw with exhaust housing HPC coated black $1500

choice of either 18 psi or 24 psi actuator. $100 each

turbo beenie $75

ss braided lines both feed and return. $100

3 inch dump with 2 inch wastegate pipe all in 316 stainless $200

5 inch cat $150

PFC with inbuilt Boost controller $1000

600 x 300 x 80 ASE front mount $700

brand new bosch q45 AFM $300

4 inch stainless intake $100

FPR with gauge $150

044 intank setup. $200

Trans

fully built box from MV Automatics

2800 high stall

stg 2 shift kit

large trans cooler

includes all new custum clutches and kevlar band etc $2200

rb25det

built 12 months ago but done low kays ,consists of

acid cleaned and prepped block, new welsh plugs etc

balanced crank to suit new rods and pistons

Eagle H beam rods

ACL Forged pistons

Jun oil drive collar

ARP crank, big end, and head studs

N1 oil pump

new R33 water pump

new tensioners and nissan belt

tomei oil retrictors

Short motor $3500

head rebuilt with tomei poncams $1500

tomei exhaust cam wheel (not installed) $200

new NGK iridium's

Bolt ons

ETM high mount manifold HPC coated black $1000

gt3582r-iw with exhaust housing HPC coated black $1500

choice of either 18 psi or 24 psi actuator. $100 each

turbo beenie $75

ss braided lines both feed and return. $100

3 inch dump with 2 inch wastegate pipe all in 316 stainless $200

5 inch cat $150

PFC with inbuilt Boost controller $1000

600 x 300 x 80 ASE front mount $700

brand new bosch q45 AFM $300

4 inch stainless intake $100

FPR with gauge $150

044 intank setup. $200

Trans

fully built box from MV Automatics

2800 high stall

stg 2 shift kit

large trans cooler

includes all new custum clutches and kevlar band etc $2200

PM sent

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • looking forward to your t56 swap man its a game changer if it works! 
    • So, when are you trying the new GR86 or BRZ?
    • Uncle Duncan Yeap, FI Interchiller  Works well, normal IAT's cruising with the WTA only went from 50°c+ to 25-30°c with the interchiller  Before, when on it hard, the IAT would see 80-90°c, now, the highest has been was around 38°c IIRC IAT is measured under the blower hat I recommend it for the street or strip where your only on it hard for 10 or so seconds, but it wouldn't be efficient for sustained track use as it would heat soak from the AC turning off or whatever it does during WOT to protect the compressor It really needs the AC running for it to not heat soak and keep the WTA coolant chilled My WTA coolant temps when just cruising is around 2°c
    • Hey Mark...sorry to interrupt your career change to hair dressing... but...did you ever fit the interchiller to the commodore, and if so how was it? And, who made it?
    • I've been pondering this, I really enjoy the convertible thing, for me, it's like riding a motorbike, without all the issue of riding a motorbike, mainly, my old sore arthritic joints getting beaten up, and, being able to do it in shorts and a T-shirt and not needing a helmet and all the other gear required, especially like wearing jackets and pants in the summer, or needing 6 layers of cloths in the winter, or not having wet weather gear handy when your 100km away from home on the bike when it decides to start raining As for the hard top and its Coupe look, whilst I do lose all that open top feeling that I really enjoy, from my experience with the NB with a detachable hard top, the cabin is a much nicer place to be, the difference in noise for one, a hard top quietens down the interior, alot, with the soft top up or down it's pretty noisy, which, after 5 or so hours, can get tiring But, as you stated, the detachable hard top totally changes the look of the car, in a really good way, and for me, the look of a detachable hard top is so much better than the PRHT which looks more like a after thought with its weird bulbous rear roof line For me, the minimal effort of putting in on, or storing it after removing it, is well worth the time and effort for the look alone And yes, I'm sure the next owner will be grateful for it as well.......  
×
×
  • Create New...