Jump to content
SAU Community

R33 Gtst Sedan 350 Rwkw Package Or Seperate


Recommended Posts

engine internals

rb25det

built 12 months ago but done low kays ,consists of

acid cleaned and prepped block, new welsh plugs etc

balanced crank to suit new rods and pistons

Eagle H beam rods

ACL Forged pistons

Jun oil drive collar

ARP crank, big end, and head studs

N1 oil pump

new R33 water pump

new tensioners and nissan belt

tomei oil retrictors

head rebuilt with tomei poncams

tomei exhaust cam wheel

new NGK iridium's

Bolt ons

ETM high mount manifold HPC coated black

gt3582r-iw with exhaust housing HPC coated black

choice of either 18 psi or 24 psi actuator.

turbo beenie

ss braided lines both feed and return.

3 inch dump with 2 inch wastegate pipe all in 316 stainless

5 inch cat

PFC with inbuilt Boost controller

600 x 300 x 80 ASE front mount

brand new bosch q45 AFM

4 inch stainless intake

FPR with gauge

044 intank setup.

Trans

fully built box from MV Automatics

2800 high stall

stg 2 shift kit

includes all new custum clutches and kevlar band etc

this is my wifes car so was only ever boosted properly on the dyno.

either seperate for parts or sell car whole.

open to offers

Link to comment
Share on other sites

Hey mate

I know you probably wanna sell the car whole, but would be interested in the Transmission if you do seperate it. Pm me details on price, locatation etc.

Cheers

Brendan

no worries i will happily seperate the car if i can find buyers for a few of the major parts like manifold / turbo set up, engine , trans etc.once the big things are allocated i will strip all the parts and list prices for all the remaining mods.

Link to comment
Share on other sites

rb25det

built 12 months ago but done low kays ,consists of

acid cleaned and prepped block, new welsh plugs etc

balanced crank to suit new rods and pistons

Eagle H beam rods

ACL Forged pistons

Jun oil drive collar

ARP crank, big end, and head studs

N1 oil pump

new R33 water pump

new tensioners and nissan belt

tomei oil retrictors

Short motor $3500

head rebuilt with tomei poncams $1500

tomei exhaust cam wheel (not installed) $200

new NGK iridium's

Bolt ons

ETM high mount manifold HPC coated black $1000

gt3582r-iw with exhaust housing HPC coated black $1500

choice of either 18 psi or 24 psi actuator. $100 each

turbo beenie $75

ss braided lines both feed and return. $100

3 inch dump with 2 inch wastegate pipe all in 316 stainless $200

5 inch cat $150

PFC with inbuilt Boost controller $1000

600 x 300 x 80 ASE front mount $700

brand new bosch q45 AFM $300

4 inch stainless intake $100

FPR with gauge $150

044 intank setup. $200

Trans

fully built box from MV Automatics

2800 high stall

stg 2 shift kit

large trans cooler

includes all new custum clutches and kevlar band etc $2200

Link to comment
Share on other sites

rb25det

built 12 months ago but done low kays ,consists of

acid cleaned and prepped block, new welsh plugs etc

balanced crank to suit new rods and pistons

Eagle H beam rods

ACL Forged pistons

Jun oil drive collar

ARP crank, big end, and head studs

N1 oil pump

new R33 water pump

new tensioners and nissan belt

tomei oil retrictors

Short motor $3500

head rebuilt with tomei poncams $1500

tomei exhaust cam wheel (not installed) $200

new NGK iridium's

Bolt ons

ETM high mount manifold HPC coated black $1000

gt3582r-iw with exhaust housing HPC coated black $1500

choice of either 18 psi or 24 psi actuator. $100 each

turbo beenie $75

ss braided lines both feed and return. $100

3 inch dump with 2 inch wastegate pipe all in 316 stainless $200

5 inch cat $150

PFC with inbuilt Boost controller $1000

600 x 300 x 80 ASE front mount $700

brand new bosch q45 AFM $300

4 inch stainless intake $100

FPR with gauge $150

044 intank setup. $200

Trans

fully built box from MV Automatics

2800 high stall

stg 2 shift kit

large trans cooler

includes all new custum clutches and kevlar band etc $2200

PM sent

Link to comment
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share



  • Similar Content

  • Latest Posts

    • Yeah they sure are available for import now, its great news Matt, You need an import specialist insurer, nothing has really changed over the years about the mainstream insurance companies not touching them. I have my cars with Lumley (same group as NRMA etc) because they insure imports and have a good concept of "stable use" where as long as no more than 2 cars are being driven each day you can have them all on a good rate, I've also had no issues with claims through them. Note they won't insure a car if you take it to the track, even for an off track claim. Shannons are another option but I had a lot of trouble with their claims (they were happy to take the premiums, not so keen to pay out), and I'm sure there are other import specialists too 
    • I'm a lifelong home drummer, was in a couple of bands as a teenager/early 20's then moved to Japan and didn't play at all until 2019 when my missus and I were invited to check out the band room upstairs at a restaurant cafe here in JP. They had a full acoustic drum kit and they let me have a bash for about 20 mins. I went away from there wondering how I could not play for 19 years.... Missus bought me a e-drum kit a few weeks later (Yamaha DTX402) which is basic but lets me play at home in my tiny Japanese house.  Also have an Epiphone Les Paul and little Vox amp and delay pedal I bought for the missus because she wanted to learn to play the guitar, but she never got into it. That was about 8 years ago. I taught myself to play some 80's U2 song riffs like the Fly solo, etc and some other things but being a drummer I don't really have the dexterity in the fingers lol. Ham fisted if you will. So I kind of just mess around with the guitar rather than try to seriously play complete songs. My son on the other hand inherited all my side of the family's musical talent and is a brilliant classical pianist at 16 years old. He'll go on to do something in the music industry here for sure once he finished his schooling. I got him a Yamaha NU1XA hybrid piano earlier this year.
    • If the BOV is plumbed in as mentioned, like stock.... why exactly would it stall? It'd be like stock. Do stock cars stall with stock bovs?
    • You mean a rich spike, as the air has been metered multiple times due to the turbulent air, you end up injecting more fuel causing a momentary dip in torque and quite possibly a stall event. TL;DR, install a Haltech Elite or S3 or R3, convert to DBW, throw all ancient shit into the bin and enjoy the car.
×
×
  • Create New...