Jump to content
SAU Community

Recommended Posts

I noticed my V35 pings quite a lot. I had it tuned by a very trustworthy guy who worked on my Zed and pinging in a turbo engine is a real worry but not so much in an NA. Anyway he said the computer on the V35 has everything tied up so he can't adjust it.

Has anyone else noticed excessive pinging?

cheers

Geoff

Link to comment
https://www.sau.com.au/forums/topic/251990-pinging/
Share on other sites

I was in a roundabout in Sunbury yesterday and I momentarily about to start but saw a car that suspectly going to turn my way so I brake, then saw the car wasn't, so I accelerate again quickly and had a tyre chirp than a rattling kind of noise ta ta ta ta, is that the one you're talking about? or is that my ESC turning on? it's happening too quick I didn't have chance to look down and see if my SLIP light was on as it's too dangerous to do that in the middle of a busy roundabout.

Link to comment
https://www.sau.com.au/forums/topic/251990-pinging/#findComment-4360307
Share on other sites

Did your mechanic check the timing Geoff? Is the timing adjustable by rotating the CAS like on the Zed or is that also controlled by the computer? Shouldn't be out of whack I know but it might have been fiddled with by the previous owner. And I assume you are running with 98 octane fuel.

Cliff

Link to comment
https://www.sau.com.au/forums/topic/251990-pinging/#findComment-4360329
Share on other sites

if anyone fiddled with mine it will most likely be Nissan dealer doing the 50000km service.

does anyone have info if the timing on V35's VQ35 is the same as local 350Z ? as I suspect nissan would have used 350Z's data to perform any engine related service.

Link to comment
https://www.sau.com.au/forums/topic/251990-pinging/#findComment-4360346
Share on other sites

I was in a roundabout in Sunbury yesterday and I momentarily about to start but saw a car that suspectly going to turn my way so I brake, then saw the car wasn't, so I accelerate again quickly and had a tyre chirp than a rattling kind of noise ta ta ta ta, is that the one you're talking about? or is that my ESC turning on? it's happening too quick I didn't have chance to look down and see if my SLIP light was on as it's too dangerous to do that in the middle of a busy roundabout.

hey mate that is just your traction control / VDC kicking in.

has happened to me a few times as well when my previous tyres were bald and in the wet

Link to comment
https://www.sau.com.au/forums/topic/251990-pinging/#findComment-4361507
Share on other sites

I seem to get pinging on mine a bit too... haven't quite figured out the cause. Seems to happen at low rpms when the car is coasting in gear then i get back on throttle...say under 2k rpms. It also occasionally happens during same coasting in gear to back on throttle but over 2k rpm so e.g. 2400 rpms. Anyone noticed these cars are really sensitive to heat ? Or is it just mine lol =/

Link to comment
https://www.sau.com.au/forums/topic/251990-pinging/#findComment-4361544
Share on other sites

I seem to get pinging on mine a bit too... haven't quite figured out the cause. Seems to happen at low rpms when the car is coasting in gear then i get back on throttle...say under 2k rpms. It also occasionally happens during same coasting in gear to back on throttle but over 2k rpm so e.g. 2400 rpms. Anyone noticed these cars are really sensitive to heat ? Or is it just mine lol =/

I get exactly the same symptoms as Touge Kyousou above but in a VQ25DD engine...

Link to comment
https://www.sau.com.au/forums/topic/251990-pinging/#findComment-4365429
Share on other sites

in that case I have not experienced the pinging...

although it happened like a rattling engine sound 1-2 second after the car haven't been started for 2 days.

is that cos there's no oil in the valvetrain/head?

Correct - that is the lifters you can hear

Link to comment
https://www.sau.com.au/forums/topic/251990-pinging/#findComment-4365966
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Latest Posts

    • It's almost certainly a reluctor generating an "AC" waveform. No, ECUs don't generally read those - they're usually set up for PWM square wave 0-5v stuff.
    • Working through possible solutions of converting my mechanical speedo.    Anyone know what type of speedo sensor the factory r34 gtr getrag has ? what the output is ? I assume its not a VSS and more a voltage like earlier speedo sensors ? Can an ECU read it ?  
    • roof rail delete used to be a thing, they were made locally for a while too
    • I can get more photos of it here soon and I plan to make a thread detailing the process. I received the car this way and it sorely needs refinishing. That is probably the most appealing photo of it. Up close it is fading, cracked, and needs to be re-glued. Depending on their condition I'm on the fence between refinishing or making a new set.  Another angle hiding the pimples and razor pumps  
    • According to this thread the RS4V with build plate RC40 comes with the R200 diff @ 4.083 ratio as well (mine has said RC40 denotation). We may need to check if the axle stubs are the same pattern as well. The auto subframes have longer axles. However I think yours being a later Series 2 as well, we should have the same bolt pattern for the diff stubs. Unless your upgraded rear also has upgraded axles. Either way, I would not be opposed to pulling the covers to check so I can inspect that  fancy rear core  Also I don't have HICAS. I don't believe that should change things but I hope the people here with heaps more experience than me can correct me if I'm wrong   Let me know if you want to attempt to make this work and I can get some pictures of mine from under the car. 
×
×
  • Create New...