Jump to content
SAU Community

R32 Stuff + Vl Stuff For Sale Etc


Recommended Posts

I have a bunch of bits and pieces i need to get rid of asap. All parts located in Sydney and i can email pics on request. All items were in working condition when removed unless i have stated otherwise. Any questions or for pics pm me.

- R32 GTR Series 1 dash modified to have gtst tacho w/clock - Fits all R32's with slight wiring modification (Series 1 should be straight fit for GTR/GTST) $80

- Clutch fans X 2- Suit rb20 possible other rb engines $10ea

- Rb20 crossover pipe w/bov mount $20

- Bottom half of Rb20 plenum $30

- Rb20 (i think) crossover pipe w/o bov mount $20

- Rb20 series 2 timing cover $10

- Rb20 AAC valve $30

- Rb20 PCV valve $20

- Top half Rb20 plenum (has been machined on mounting section so only good for making into custom plenum) $5

- Rb20 exhaust manifold $20

- Top half Rb20 plenum $20

- 10 X Rb20 injectors $15ea

- Rb20 throttle body $20

- Rb20 blow off valve $20

- Rb20 fuel regulator (i think) $20

- New Durapro intake side metal gasket kit w/dump pipe gasket thrown in (not sure which engine its for but not rb20...i think is for rb25/26) $100

- Reco'd VL power steering pump w/rb20 adaptor bracket $50

- Rb20 thermostat housing $5

- VL oil pressure switch $20

- Clutch fork from rb20 box $5

- Rb20 alternator $90

- Rb20 coilpacks - set of 6 w/brackets $100

- Rb20 coilpack loom $50

- Rb20 air con compressor w/belt $50

- Used exedy heavy duty clutch off rb20 - should fit any rb engine (not slipping with 270kw atw) $50

- Rb20 flywheel $50

- Rb20 head (minus intake and exhaust manifolds but otherwise complete) $120

- New VL exhaust manifold gasket (has small cut between No.1 and No.2 exhaust ports but will not affect sealing) $20

- Red neon light roughly 30cm long $20

- Rb20 series 2 valley cover $20

- VL manual ecu (was reco'd in 1999...cant remember if chipped or not) $50

- VL dizzy (no cap or power transistor) $10

- VL afm with airbox top half $30

- VL clutch slave cylinder $10

- VL clutch master cylinder (has not been used for a long time so may need new seals) $40

- VL gearknob $30

- VL commodore/calais owners handbook and product information books in a sundells holden folder (owners handbook good condition/product info book glue is coming adrift at spine) $30

- R32 GTR/GTST passenger side taillight in black $50

- VL fuel pump $30

- VL auto ecus X 3 $30ea

- VL manual pedal box (minus clutch pedal) $10

- Rb20 starter motor $50

- Hornet scoop ( has had fibreglass repair and resprayed white ) $100

- VL afm $20

- VL dizzy complete $50

- VL alternator $50

- VL coils X 2 $10ea

- VL fuel regulator $30

- VL coolant temp sensor $20

- VL tps $20

- VL power transistor $10

And a few other random things...

- Playstation 1 console w/black controller + memory card + cords (no power cord) $10

- Lotus Elan sales brochure circa late 80's (collectors item) $10

- Palsonic 51cm tv w/remote $50

Cheers.

Link to comment
Share on other sites

Update:

- R32 GTR Series 1 dash modified to have gtst tacho w/clock - Fits all R32's with slight wiring modification (Series 1 should be straight fit for GTR/GTST) $80

- Clutch fans X 2- Suit rb20 possible other rb engines $10ea

- Rb20 crossover pipe w/bov mount $20

- Bottom half of Rb20 plenum $30

- Rb20 (i think) crossover pipe w/o bov mount $20

- Rb20 series 2 timing cover $10

- Rb20 AAC valve $30

- Rb20 PCV valve $20

- Top half Rb20 plenum (has been machined on mounting section so only good for making into custom plenum) $5

- Rb20 exhaust manifold $20

- Top half Rb20 plenum $20

- 10 X Rb20 injectors $15ea SOLD pending payment

- Rb20 throttle body $20

- Rb20 blow off valve $20

- Rb20 fuel regulator (i think) $20 SOLD pending payment

- New Durapro intake side metal gasket kit w/dump pipe gasket thrown in (not sure which engine its for but not rb20...i think is for rb25/26) $100

- Reco'd VL power steering pump w/rb20 adaptor bracket $50

- Rb20 thermostat housing $5

- VL oil pressure switch $20

- Clutch fork from rb20 box $5

- Rb20 alternator $90

- Rb20 coilpacks - set of 6 w/brackets $100 SOLD pending payment

- Rb20 coilpack loom $50

- Rb20 air con compressor w/belt $50

- Used exedy heavy duty clutch off rb20 - should fit any rb engine (not slipping with 270kw atw) $50

- Rb20 flywheel $50

- Rb20 head (minus manifolds and cam caps but otherwise complete) $100

- New VL exhaust manifold gasket (has small cut between No.1 and No.2 exhaust ports but will not affect sealing) $20

- Red neon light roughly 30cm long $20

- Rb20 series 2 valley cover $20

- VL manual ecu (was reco'd in 1999...cant remember if chipped or not) $50

- VL dizzy (no cap or power transistor) $10

- VL afm with airbox top half $30

- VL clutch slave cylinder $10

- VL clutch master cylinder (has not been used for a long time so may need new seals) $40

- VL gearknob $30

- VL commodore/calais owners handbook and product information books in a sundells holden folder (owners handbook good condition/product info book glue is coming adrift at spine) $30

- R32 GTR/GTST passenger side taillight in black $50

- VL fuel pump $30

- VL auto ecus X 3 $30ea

- VL manual pedal box (minus clutch pedal) $10

- Rb20 starter motor $50

- Hornet scoop ( has had fibreglass repair and resprayed white ) $100

- VL afm $20

- VL dizzy complete $50

- VL alternator $50

- VL coils X 2 $10ea

- VL fuel regulator $30

- VL coolant temp sensor $20

- VL tps $20

- VL power transistor $10

And a few other random things...

- Playstation 1 console w/black controller + memory card + cords (no power cord) $10

- Lotus Elan sales brochure circa late 80's (collectors item) $10

- Palsonic 51cm tv w/remote $50

Link to comment
Share on other sites

Update:

- R32 GTR Series 1 dash modified to have gtst tacho w/clock - Fits all R32's with slight wiring modification (Series 1 should be straight fit for GTR/GTST) $80

- Clutch fans X 2- Suit rb20 possible other rb engines $10ea

- Rb20 crossover pipe w/bov mount $20

- Bottom half of Rb20 plenum $30

- Rb20 (i think) crossover pipe w/o bov mount $20

- Rb20 series 2 timing cover $10

- Rb20 AAC valve $30

- Rb20 PCV valve $20

- Top half Rb20 plenum (has been machined on mounting section so only good for making into custom plenum) $5

- Rb20 exhaust manifold $20

- Top half Rb20 plenum $20

- 10 X Rb20 injectors $15ea SOLD pending payment

- Rb20 throttle body $20

- Rb20 blow off valve $20

- Rb20 fuel regulator (i think) $20 SOLD pending payment

- New Durapro intake side metal gasket kit w/dump pipe gasket thrown in (not sure which engine its for but not rb20...i think is for rb25/26) $100

- Reco'd VL power steering pump w/rb20 adaptor bracket $50

- Rb20 thermostat housing $5

- VL oil pressure switch $20

- Clutch fork from rb20 box $5

- Rb20 alternator $90

- Rb20 coilpacks - set of 6 w/brackets $100 SOLD pending payment

- Rb20 coilpack loom $50 SOLD pending payment

- Rb20 air con compressor w/belt $50

- Used exedy heavy duty clutch off rb20 - should fit any rb engine (not slipping with 270kw atw) $50

- Rb20 flywheel $50

- Rb20 head (minus rocker covers, manifolds and cam caps but otherwise complete) $100

- New VL exhaust manifold gasket (has small cut between No.1 and No.2 exhaust ports but will not affect sealing) $20

- Red neon light roughly 30cm long $20

- Rb20 series 2 valley cover $20 SOLD pending payment

- VL manual ecu (was reco'd in 1999...cant remember if chipped or not) $50

- VL dizzy (no cap or power transistor) $10

- VL afm with airbox top half $30

- VL clutch slave cylinder $10

- VL clutch master cylinder (has not been used for a long time so may need new seals) $40

- VL gearknob $30

- VL commodore/calais owners handbook and product information books in a sundells holden folder (owners handbook good condition/product info book glue is coming adrift at spine) $30

- R32 GTR/GTST passenger side taillight in black $50

- VL fuel pump $30

- VL auto ecus X 3 $30ea

- VL manual pedal box (minus clutch pedal) $10

- Rb20 starter motor $50

- Hornet scoop ( has had fibreglass repair and resprayed white ) $100

- VL afm $20

- VL dizzy complete $50

- VL alternator $50

- VL coils X 2 $10ea

- VL fuel regulator $30

- VL coolant temp sensor $20

- VL tps $20

- VL power transistor $10

And a few other random things...

- Playstation 1 console w/black controller + memory card + cords (no power cord) $10

- Lotus Elan sales brochure circa late 80's (collectors item) $10

- Palsonic 51cm tv w/remote $50

Link to comment
Share on other sites

Update + Price Drop...Need this stuff gone:

- R32 GTR Series 1 dash modified to have gtst tacho w/clock - Fits all R32's with slight wiring modification (Series 1 should be straight fit for GTR/GTST) $50

- Clutch fans X 2- Suit rb20 possible other rb engines $5ea

- Rb20 crossover pipe w/bov mount $10

- Bottom half of Rb20 plenum $20

- Rb20 (i think) crossover pipe w/o bov mount $20 SOLD pending payment

- Rb20 series 2 timing cover $5

- Rb20 AAC valve $30 SOLD

- Rb20 PCV valve $10

- Top half Rb20 plenum (has been machined on mounting section so only good for making into custom plenum) $5

- Rb20 exhaust manifold $10

- Top half Rb20 plenum $20

- 10 X Rb20 injectors $15ea SOLD pending payment

- Rb20 throttle body $20 SOLD pending payment

- Rb20 blow off valve $20

- Rb20 fuel regulator (i think) $20 SOLD pending payment

- New Durapro intake side metal gasket kit w/dump pipe gasket thrown in for RB25 Neo engine $100

- Reco'd VL power steering pump w/rb20 adaptor bracket $50

- Rb20 thermostat housing $5

- VL oil pressure switch $20

- Clutch fork from rb20 box $5

- Rb20 alternator $90

- Rb20 coilpacks - set of 6 w/brackets $100 SOLD pending payment

- Rb20 coilpack loom $50 SOLD

- Rb20 air con compressor w/belt $50

- Used exedy heavy duty clutch off rb20 - should fit any rb engine (not slipping with 270kw atw) $50

- Rb20 flywheel $50

- Rb20 head (minus rocker covers, manifolds and cam caps but otherwise complete) $100

- New VL exhaust manifold gasket (has small cut between No.1 and No.2 exhaust ports but will not affect sealing) $20 SOLD pending payment

- Red neon light roughly 30cm long $20

- Rb20 series 2 valley cover $20 SOLD pending payment

- VL manual ecu (was reco'd in 1999...cant remember if chipped or not) $50

- VL dizzy (no cap or power transistor) $10

- VL afm with airbox top half $30

- VL clutch slave cylinder $10

- VL clutch master cylinder (has not been used for a long time so may need new seals) $40

- VL gearknob $30

- VL commodore/calais owners handbook and product information books in a sundells holden folder (owners handbook good condition/product info book glue is coming adrift at spine) $30

- R32 GTR/GTST passenger side taillight in black $50

- VL fuel pump $30

- VL auto ecus X 3 $30ea

- VL manual pedal box (minus clutch pedal) $10

- Rb20 starter motor $50

- Hornet scoop ( has had fibreglass repair and resprayed white ) $100

- VL afm $20

- VL dizzy complete $50

- VL alternator $50

- VL coils X 2 $10ea

- VL fuel regulator $30

- VL coolant temp sensor $20

- VL tps $20

- VL power transistor $10

And a few other random things...

- Playstation 1 console w/black controller + memory card + cords (no power cord) $10 SOLD pending payment

- Lotus Elan sales brochure circa late 80's (collectors item) $10 SOLD pending payment

- Palsonic 51cm tv w/remote $50 SOLD pending payment

Link to comment
Share on other sites

Update:

- R32 GTR Series 1 dash modified to have gtst tacho w/clock - Fits all R32's with slight wiring modification (Series 1 should be straight fit for GTR/GTST) $50

- Clutch fans X 2- Suit rb20 possible other rb engines $5ea

- Rb20 crossover pipe w/bov mount $10

- Bottom half of Rb20 plenum $20

- Rb20 (i think) crossover pipe w/o bov mount $20 SOLD pending payment

- Rb20 series 2 timing cover $5

- Rb20 AAC valve $30 SOLD

- Rb20 PCV valve $10

- Top half Rb20 plenum (has been machined on mounting section so only good for making into custom plenum) $5

- Rb20 exhaust manifold $10

- Top half Rb20 plenum $20

- 10 X Rb20 injectors $15ea SOLD pending payment

- Rb20 throttle body $20 SOLD pending payment

- Rb20 blow off valve $20

- Rb20 fuel regulator (i think) $20 SOLD pending payment

- New Durapro intake side metal gasket kit w/dump pipe gasket thrown in for RB25 Neo engine $100

- Reco'd VL power steering pump w/rb20 adaptor bracket $50 SOLD pending payment

- Rb20 thermostat housing $5

- VL oil pressure switch $20

- Clutch fork from rb20 box $5

- Rb20 alternator $90

- Rb20 coilpacks - set of 6 w/brackets $100 SOLD pending payment

- Rb20 coilpack loom $50 SOLD

- Rb20 air con compressor w/belt $50

- Used exedy heavy duty clutch off rb20 - should fit any rb engine (not slipping with 270kw atw) $50

- Rb20 flywheel $50

- Rb20 head (minus rocker covers, manifolds and cam caps but otherwise complete) $100

- New VL exhaust manifold gasket (has small cut between No.1 and No.2 exhaust ports but will not affect sealing) $20

- Red neon light roughly 30cm long $20

- Rb20 series 2 valley cover $20 SOLD pending payment

- VL manual ecu (was reco'd in 1999...cant remember if chipped or not) $50

- VL dizzy (no cap or power transistor) $10

- VL afm with airbox top half $30

- VL clutch slave cylinder $10

- VL clutch master cylinder (has not been used for a long time so may need new seals) $40

- VL gearknob $30

- VL commodore/calais owners handbook and product information books in a sundells holden folder (owners handbook good condition/product info book glue is coming adrift at spine) $30

- R32 GTR/GTST passenger side taillight in black $50

- VL fuel pump $30

- VL auto ecus X 3 $30ea

- VL manual pedal box (minus clutch pedal) $10

- Rb20 starter motor $50

- Hornet scoop ( has had fibreglass repair and resprayed white ) $100

- VL afm $20

- VL dizzy complete $50

- VL alternator $50

- VL coils X 2 $10ea

- VL fuel regulator $30

- VL coolant temp sensor $20

- VL tps $20

- VL power transistor $10

And a few other random things...

- Playstation 1 console w/black controller + memory card + cords (no power cord) $10 SOLD pending payment

- Lotus Elan sales brochure circa late 80's (collectors item) $10 SOLD pending payment

- Palsonic 51cm tv w/remote $50 SOLD pending payment

Edited by nIsMo86
Link to comment
Share on other sites

Update:

- R32 GTR Series 1 dash modified to have gtst tacho w/clock - Fits all R32's with slight wiring modification (Series 1 should be straight fit for GTR/GTST) $50

- Clutch fans X 2- Suit rb20 possible other rb engines $5ea

- Rb20 crossover pipe w/bov mount $10

- Bottom half of Rb20 plenum $20

- Rb20 (i think) crossover pipe w/o bov mount $20 SOLD

- Rb20 series 2 timing cover $5

- Rb20 PCV valve $10

- Top half Rb20 plenum (has been machined on mounting section so only good for making into custom plenum) $5

- Rb20 exhaust manifold $10

- Top half Rb20 plenum $20

- 10 X Rb20 injectors $15ea SOLD pending payment

- Rb20 throttle body $20 SOLD

- Rb20 blow off valve $20

- Rb20 fuel regulator (i think) $20 SOLD pending payment

- New Durapro intake side metal gasket kit w/dump pipe gasket thrown in for RB25 Neo engine $100

- Reco'd VL power steering pump w/rb20 adaptor bracket $50 SOLD pending payment

- Rb20 thermostat housing $5 SOLD

- VL oil pressure switch $20

- Clutch fork from rb20 box $5

- Rb20 alternator $90

- Rb20 coilpacks - set of 6 w/brackets $100 SOLD pending payment

- Rb20 coilpack loom $50

- Rb20 air con compressor w/belt $50

- Used exedy heavy duty clutch off rb20 - should fit any rb engine (not slipping with 270kw atw) $50

- Rb20 flywheel $50

- Rb20 head (minus rocker covers, manifolds and cam caps but otherwise complete) $100 SOLD pending payment

- New VL exhaust manifold gasket (has small cut between No.1 and No.2 exhaust ports but will not affect sealing) $20

- Red neon light roughly 30cm long $20

- Rb20 series 2 valley cover $20 SOLD pending payment

- VL manual ecu (was reco'd in 1999...cant remember if chipped or not) $50

- VL dizzy (no cap or power transistor) $10 SOLD pending payment

- VL afm with airbox top half $30

- VL clutch slave cylinder $10

- VL clutch master cylinder (has not been used for a long time so may need new seals) $40

- VL gearknob $30

- VL commodore/calais owners handbook and product information books in a sundells holden folder (owners handbook good condition/product info book glue is coming adrift at spine) $30

- R32 GTR/GTST passenger side taillight in black $50

- VL fuel pump $30

- VL auto ecus X 3 $30ea

- VL manual pedal box (minus clutch pedal) $10

- Rb20 starter motor $50

- Hornet scoop ( has had fibreglass repair and resprayed white ) $100

- VL afm $20

- VL dizzy complete $50

- VL alternator $50

- VL coils X 2 $10ea

- VL fuel regulator $30

- VL coolant temp sensor $20

- VL tps $20

- VL power transistor $10

And a few other random things...

- Playstation 1 console w/black controller + memory card + cords (no power cord) $10 SOLD

- Lotus Elan sales brochure circa late 80's (collectors item) $10 SOLD pending payment

- Palsonic 51cm tv w/remote $50 SOLD pending payment

Link to comment
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share



  • Similar Content

  • Latest Posts

    • I have S15 helical too. It is a bit worn. I think the drive behaviour you describe is related to this wear. Wear of helicals is something that no-one seems to have paid a lot of attention to, but now that they (as in original Nissan ones) are all a bit old - we're starting to  see the consequences. The ends of the helical spurs wear into the casing. That's where they perform the braking that diverts torque. Some of the more modern helical designs have proper wear surfaces introduced there, but the Nissan ones are just steel on steel (or iron).
    • I've had a range of rear diff centres - open, viscous, helical, mechanical, welded, etc.   I can't go past a refreshed factory 32 gtr centre for consistent lock and street driving. The next step up for me would be the nismo 1.5 way , which likely suits you better as track sounds like the focus. Will chatter in carparks but its not the worst.   I have never tried a quaife rear diff, an option I've looked at before and might be one for you .....   Currently playing with an S15 centre at the moment and I hate it.  The transition from single wheel spin either side is just weird.
    • Honestly, I did think the PDM could do it and thought Haltech told me the pump didn’t like it. But after re-reading the emails and comments above, I clearly misunderstood lol.
    • I also run a CD009. I'm currently on a 4.08 and it's not great. I originally intended to run a 3.3 but had issues, more on that later. I'd stick to anywhere between a 3.3-3.7 as found in the 350z.  As for brands of ring and pinions, absolutely stay away from Speedtek. They are absolute garbage. See my build thread for more information on that. I went through two of there 3.3's and both had bad runout. They were paperweights and they have still yet to refund me.  I ended up putting in a Nissan 4.08, which was better then the original 4.36 but is far from ideal. I'm going to pop a 3.5 in this winter. I'd stick Nissan. I've also heard of a company "Neat Gearboxes" that makes them. Haven't tried them, but they can't be worst then Speedtek... 
    • You should Nistune the ECU, so you have freedom to use modern injectors instead of replacing with the same old shit. This is also required if you want to boost it up above ~200rwkW, where the stock injectors will be running out of capacity. Having said that, it is unlikely that the injectors need replacing just 'coz. If you imported it from Japan, the fuel should have been pretty good quality for the whole life of the car.
×
×
  • Create New...