Jump to content
SAU Community

Recommended Posts

I have a bunch of bits and pieces i need to get rid of asap. All parts located in Sydney and i can email pics on request. All items were in working condition when removed unless i have stated otherwise. Any questions or for pics pm me.

- R32 GTR Series 1 dash modified to have gtst tacho w/clock - Fits all R32's with slight wiring modification (Series 1 should be straight fit for GTR/GTST) $80

- Clutch fans X 2- Suit rb20 possible other rb engines $10ea

- Rb20 crossover pipe w/bov mount $20

- Bottom half of Rb20 plenum $30

- Rb20 (i think) crossover pipe w/o bov mount $20

- Rb20 series 2 timing cover $10

- Rb20 AAC valve $30

- Rb20 PCV valve $20

- Top half Rb20 plenum (has been machined on mounting section so only good for making into custom plenum) $5

- Rb20 exhaust manifold $20

- Top half Rb20 plenum $20

- 10 X Rb20 injectors $15ea

- Rb20 throttle body $20

- Rb20 blow off valve $20

- Rb20 fuel regulator (i think) $20

- New Durapro intake side metal gasket kit w/dump pipe gasket thrown in (not sure which engine its for but not rb20...i think is for rb25/26) $100

- Reco'd VL power steering pump w/rb20 adaptor bracket $50

- Rb20 thermostat housing $5

- VL oil pressure switch $20

- Clutch fork from rb20 box $5

- Rb20 alternator $90

- Rb20 coilpacks - set of 6 w/brackets $100

- Rb20 coilpack loom $50

- Rb20 air con compressor w/belt $50

- Used exedy heavy duty clutch off rb20 - should fit any rb engine (not slipping with 270kw atw) $50

- Rb20 flywheel $50

- Rb20 head (minus intake and exhaust manifolds but otherwise complete) $120

- New VL exhaust manifold gasket (has small cut between No.1 and No.2 exhaust ports but will not affect sealing) $20

- Red neon light roughly 30cm long $20

- Rb20 series 2 valley cover $20

- VL manual ecu (was reco'd in 1999...cant remember if chipped or not) $50

- VL dizzy (no cap or power transistor) $10

- VL afm with airbox top half $30

- VL clutch slave cylinder $10

- VL clutch master cylinder (has not been used for a long time so may need new seals) $40

- VL gearknob $30

- VL commodore/calais owners handbook and product information books in a sundells holden folder (owners handbook good condition/product info book glue is coming adrift at spine) $30

- R32 GTR/GTST passenger side taillight in black $50

- VL fuel pump $30

- VL auto ecus X 3 $30ea

- VL manual pedal box (minus clutch pedal) $10

- Rb20 starter motor $50

- Hornet scoop ( has had fibreglass repair and resprayed white ) $100

- VL afm $20

- VL dizzy complete $50

- VL alternator $50

- VL coils X 2 $10ea

- VL fuel regulator $30

- VL coolant temp sensor $20

- VL tps $20

- VL power transistor $10

And a few other random things...

- Playstation 1 console w/black controller + memory card + cords (no power cord) $10

- Lotus Elan sales brochure circa late 80's (collectors item) $10

- Palsonic 51cm tv w/remote $50

Cheers.

Link to comment
https://www.sau.com.au/forums/topic/251999-r32-stuff-vl-stuff-for-sale-etc/
Share on other sites

AC compressor in good condition just a bit dirty. No bearing noise or unusual clutch noise. My AC needed regas so I cant say it was blowing cold recently. Can chuck in the AC belt and brackets etc with it. I can send you pics if you like?

Update:

- R32 GTR Series 1 dash modified to have gtst tacho w/clock - Fits all R32's with slight wiring modification (Series 1 should be straight fit for GTR/GTST) $80

- Clutch fans X 2- Suit rb20 possible other rb engines $10ea

- Rb20 crossover pipe w/bov mount $20

- Bottom half of Rb20 plenum $30

- Rb20 (i think) crossover pipe w/o bov mount $20

- Rb20 series 2 timing cover $10

- Rb20 AAC valve $30

- Rb20 PCV valve $20

- Top half Rb20 plenum (has been machined on mounting section so only good for making into custom plenum) $5

- Rb20 exhaust manifold $20

- Top half Rb20 plenum $20

- 10 X Rb20 injectors $15ea SOLD pending payment

- Rb20 throttle body $20

- Rb20 blow off valve $20

- Rb20 fuel regulator (i think) $20 SOLD pending payment

- New Durapro intake side metal gasket kit w/dump pipe gasket thrown in (not sure which engine its for but not rb20...i think is for rb25/26) $100

- Reco'd VL power steering pump w/rb20 adaptor bracket $50

- Rb20 thermostat housing $5

- VL oil pressure switch $20

- Clutch fork from rb20 box $5

- Rb20 alternator $90

- Rb20 coilpacks - set of 6 w/brackets $100 SOLD pending payment

- Rb20 coilpack loom $50

- Rb20 air con compressor w/belt $50

- Used exedy heavy duty clutch off rb20 - should fit any rb engine (not slipping with 270kw atw) $50

- Rb20 flywheel $50

- Rb20 head (minus manifolds and cam caps but otherwise complete) $100

- New VL exhaust manifold gasket (has small cut between No.1 and No.2 exhaust ports but will not affect sealing) $20

- Red neon light roughly 30cm long $20

- Rb20 series 2 valley cover $20

- VL manual ecu (was reco'd in 1999...cant remember if chipped or not) $50

- VL dizzy (no cap or power transistor) $10

- VL afm with airbox top half $30

- VL clutch slave cylinder $10

- VL clutch master cylinder (has not been used for a long time so may need new seals) $40

- VL gearknob $30

- VL commodore/calais owners handbook and product information books in a sundells holden folder (owners handbook good condition/product info book glue is coming adrift at spine) $30

- R32 GTR/GTST passenger side taillight in black $50

- VL fuel pump $30

- VL auto ecus X 3 $30ea

- VL manual pedal box (minus clutch pedal) $10

- Rb20 starter motor $50

- Hornet scoop ( has had fibreglass repair and resprayed white ) $100

- VL afm $20

- VL dizzy complete $50

- VL alternator $50

- VL coils X 2 $10ea

- VL fuel regulator $30

- VL coolant temp sensor $20

- VL tps $20

- VL power transistor $10

And a few other random things...

- Playstation 1 console w/black controller + memory card + cords (no power cord) $10

- Lotus Elan sales brochure circa late 80's (collectors item) $10

- Palsonic 51cm tv w/remote $50

Update:

- R32 GTR Series 1 dash modified to have gtst tacho w/clock - Fits all R32's with slight wiring modification (Series 1 should be straight fit for GTR/GTST) $80

- Clutch fans X 2- Suit rb20 possible other rb engines $10ea

- Rb20 crossover pipe w/bov mount $20

- Bottom half of Rb20 plenum $30

- Rb20 (i think) crossover pipe w/o bov mount $20

- Rb20 series 2 timing cover $10

- Rb20 AAC valve $30

- Rb20 PCV valve $20

- Top half Rb20 plenum (has been machined on mounting section so only good for making into custom plenum) $5

- Rb20 exhaust manifold $20

- Top half Rb20 plenum $20

- 10 X Rb20 injectors $15ea SOLD pending payment

- Rb20 throttle body $20

- Rb20 blow off valve $20

- Rb20 fuel regulator (i think) $20 SOLD pending payment

- New Durapro intake side metal gasket kit w/dump pipe gasket thrown in (not sure which engine its for but not rb20...i think is for rb25/26) $100

- Reco'd VL power steering pump w/rb20 adaptor bracket $50

- Rb20 thermostat housing $5

- VL oil pressure switch $20

- Clutch fork from rb20 box $5

- Rb20 alternator $90

- Rb20 coilpacks - set of 6 w/brackets $100 SOLD pending payment

- Rb20 coilpack loom $50 SOLD pending payment

- Rb20 air con compressor w/belt $50

- Used exedy heavy duty clutch off rb20 - should fit any rb engine (not slipping with 270kw atw) $50

- Rb20 flywheel $50

- Rb20 head (minus rocker covers, manifolds and cam caps but otherwise complete) $100

- New VL exhaust manifold gasket (has small cut between No.1 and No.2 exhaust ports but will not affect sealing) $20

- Red neon light roughly 30cm long $20

- Rb20 series 2 valley cover $20 SOLD pending payment

- VL manual ecu (was reco'd in 1999...cant remember if chipped or not) $50

- VL dizzy (no cap or power transistor) $10

- VL afm with airbox top half $30

- VL clutch slave cylinder $10

- VL clutch master cylinder (has not been used for a long time so may need new seals) $40

- VL gearknob $30

- VL commodore/calais owners handbook and product information books in a sundells holden folder (owners handbook good condition/product info book glue is coming adrift at spine) $30

- R32 GTR/GTST passenger side taillight in black $50

- VL fuel pump $30

- VL auto ecus X 3 $30ea

- VL manual pedal box (minus clutch pedal) $10

- Rb20 starter motor $50

- Hornet scoop ( has had fibreglass repair and resprayed white ) $100

- VL afm $20

- VL dizzy complete $50

- VL alternator $50

- VL coils X 2 $10ea

- VL fuel regulator $30

- VL coolant temp sensor $20

- VL tps $20

- VL power transistor $10

And a few other random things...

- Playstation 1 console w/black controller + memory card + cords (no power cord) $10

- Lotus Elan sales brochure circa late 80's (collectors item) $10

- Palsonic 51cm tv w/remote $50

Update + Price Drop...Need this stuff gone:

- R32 GTR Series 1 dash modified to have gtst tacho w/clock - Fits all R32's with slight wiring modification (Series 1 should be straight fit for GTR/GTST) $50

- Clutch fans X 2- Suit rb20 possible other rb engines $5ea

- Rb20 crossover pipe w/bov mount $10

- Bottom half of Rb20 plenum $20

- Rb20 (i think) crossover pipe w/o bov mount $20 SOLD pending payment

- Rb20 series 2 timing cover $5

- Rb20 AAC valve $30 SOLD

- Rb20 PCV valve $10

- Top half Rb20 plenum (has been machined on mounting section so only good for making into custom plenum) $5

- Rb20 exhaust manifold $10

- Top half Rb20 plenum $20

- 10 X Rb20 injectors $15ea SOLD pending payment

- Rb20 throttle body $20 SOLD pending payment

- Rb20 blow off valve $20

- Rb20 fuel regulator (i think) $20 SOLD pending payment

- New Durapro intake side metal gasket kit w/dump pipe gasket thrown in for RB25 Neo engine $100

- Reco'd VL power steering pump w/rb20 adaptor bracket $50

- Rb20 thermostat housing $5

- VL oil pressure switch $20

- Clutch fork from rb20 box $5

- Rb20 alternator $90

- Rb20 coilpacks - set of 6 w/brackets $100 SOLD pending payment

- Rb20 coilpack loom $50 SOLD

- Rb20 air con compressor w/belt $50

- Used exedy heavy duty clutch off rb20 - should fit any rb engine (not slipping with 270kw atw) $50

- Rb20 flywheel $50

- Rb20 head (minus rocker covers, manifolds and cam caps but otherwise complete) $100

- New VL exhaust manifold gasket (has small cut between No.1 and No.2 exhaust ports but will not affect sealing) $20 SOLD pending payment

- Red neon light roughly 30cm long $20

- Rb20 series 2 valley cover $20 SOLD pending payment

- VL manual ecu (was reco'd in 1999...cant remember if chipped or not) $50

- VL dizzy (no cap or power transistor) $10

- VL afm with airbox top half $30

- VL clutch slave cylinder $10

- VL clutch master cylinder (has not been used for a long time so may need new seals) $40

- VL gearknob $30

- VL commodore/calais owners handbook and product information books in a sundells holden folder (owners handbook good condition/product info book glue is coming adrift at spine) $30

- R32 GTR/GTST passenger side taillight in black $50

- VL fuel pump $30

- VL auto ecus X 3 $30ea

- VL manual pedal box (minus clutch pedal) $10

- Rb20 starter motor $50

- Hornet scoop ( has had fibreglass repair and resprayed white ) $100

- VL afm $20

- VL dizzy complete $50

- VL alternator $50

- VL coils X 2 $10ea

- VL fuel regulator $30

- VL coolant temp sensor $20

- VL tps $20

- VL power transistor $10

And a few other random things...

- Playstation 1 console w/black controller + memory card + cords (no power cord) $10 SOLD pending payment

- Lotus Elan sales brochure circa late 80's (collectors item) $10 SOLD pending payment

- Palsonic 51cm tv w/remote $50 SOLD pending payment

Update:

- R32 GTR Series 1 dash modified to have gtst tacho w/clock - Fits all R32's with slight wiring modification (Series 1 should be straight fit for GTR/GTST) $50

- Clutch fans X 2- Suit rb20 possible other rb engines $5ea

- Rb20 crossover pipe w/bov mount $10

- Bottom half of Rb20 plenum $20

- Rb20 (i think) crossover pipe w/o bov mount $20 SOLD pending payment

- Rb20 series 2 timing cover $5

- Rb20 AAC valve $30 SOLD

- Rb20 PCV valve $10

- Top half Rb20 plenum (has been machined on mounting section so only good for making into custom plenum) $5

- Rb20 exhaust manifold $10

- Top half Rb20 plenum $20

- 10 X Rb20 injectors $15ea SOLD pending payment

- Rb20 throttle body $20 SOLD pending payment

- Rb20 blow off valve $20

- Rb20 fuel regulator (i think) $20 SOLD pending payment

- New Durapro intake side metal gasket kit w/dump pipe gasket thrown in for RB25 Neo engine $100

- Reco'd VL power steering pump w/rb20 adaptor bracket $50 SOLD pending payment

- Rb20 thermostat housing $5

- VL oil pressure switch $20

- Clutch fork from rb20 box $5

- Rb20 alternator $90

- Rb20 coilpacks - set of 6 w/brackets $100 SOLD pending payment

- Rb20 coilpack loom $50 SOLD

- Rb20 air con compressor w/belt $50

- Used exedy heavy duty clutch off rb20 - should fit any rb engine (not slipping with 270kw atw) $50

- Rb20 flywheel $50

- Rb20 head (minus rocker covers, manifolds and cam caps but otherwise complete) $100

- New VL exhaust manifold gasket (has small cut between No.1 and No.2 exhaust ports but will not affect sealing) $20

- Red neon light roughly 30cm long $20

- Rb20 series 2 valley cover $20 SOLD pending payment

- VL manual ecu (was reco'd in 1999...cant remember if chipped or not) $50

- VL dizzy (no cap or power transistor) $10

- VL afm with airbox top half $30

- VL clutch slave cylinder $10

- VL clutch master cylinder (has not been used for a long time so may need new seals) $40

- VL gearknob $30

- VL commodore/calais owners handbook and product information books in a sundells holden folder (owners handbook good condition/product info book glue is coming adrift at spine) $30

- R32 GTR/GTST passenger side taillight in black $50

- VL fuel pump $30

- VL auto ecus X 3 $30ea

- VL manual pedal box (minus clutch pedal) $10

- Rb20 starter motor $50

- Hornet scoop ( has had fibreglass repair and resprayed white ) $100

- VL afm $20

- VL dizzy complete $50

- VL alternator $50

- VL coils X 2 $10ea

- VL fuel regulator $30

- VL coolant temp sensor $20

- VL tps $20

- VL power transistor $10

And a few other random things...

- Playstation 1 console w/black controller + memory card + cords (no power cord) $10 SOLD pending payment

- Lotus Elan sales brochure circa late 80's (collectors item) $10 SOLD pending payment

- Palsonic 51cm tv w/remote $50 SOLD pending payment

Edited by nIsMo86

Update:

- R32 GTR Series 1 dash modified to have gtst tacho w/clock - Fits all R32's with slight wiring modification (Series 1 should be straight fit for GTR/GTST) $50

- Clutch fans X 2- Suit rb20 possible other rb engines $5ea

- Rb20 crossover pipe w/bov mount $10

- Bottom half of Rb20 plenum $20

- Rb20 (i think) crossover pipe w/o bov mount $20 SOLD

- Rb20 series 2 timing cover $5

- Rb20 PCV valve $10

- Top half Rb20 plenum (has been machined on mounting section so only good for making into custom plenum) $5

- Rb20 exhaust manifold $10

- Top half Rb20 plenum $20

- 10 X Rb20 injectors $15ea SOLD pending payment

- Rb20 throttle body $20 SOLD

- Rb20 blow off valve $20

- Rb20 fuel regulator (i think) $20 SOLD pending payment

- New Durapro intake side metal gasket kit w/dump pipe gasket thrown in for RB25 Neo engine $100

- Reco'd VL power steering pump w/rb20 adaptor bracket $50 SOLD pending payment

- Rb20 thermostat housing $5 SOLD

- VL oil pressure switch $20

- Clutch fork from rb20 box $5

- Rb20 alternator $90

- Rb20 coilpacks - set of 6 w/brackets $100 SOLD pending payment

- Rb20 coilpack loom $50

- Rb20 air con compressor w/belt $50

- Used exedy heavy duty clutch off rb20 - should fit any rb engine (not slipping with 270kw atw) $50

- Rb20 flywheel $50

- Rb20 head (minus rocker covers, manifolds and cam caps but otherwise complete) $100 SOLD pending payment

- New VL exhaust manifold gasket (has small cut between No.1 and No.2 exhaust ports but will not affect sealing) $20

- Red neon light roughly 30cm long $20

- Rb20 series 2 valley cover $20 SOLD pending payment

- VL manual ecu (was reco'd in 1999...cant remember if chipped or not) $50

- VL dizzy (no cap or power transistor) $10 SOLD pending payment

- VL afm with airbox top half $30

- VL clutch slave cylinder $10

- VL clutch master cylinder (has not been used for a long time so may need new seals) $40

- VL gearknob $30

- VL commodore/calais owners handbook and product information books in a sundells holden folder (owners handbook good condition/product info book glue is coming adrift at spine) $30

- R32 GTR/GTST passenger side taillight in black $50

- VL fuel pump $30

- VL auto ecus X 3 $30ea

- VL manual pedal box (minus clutch pedal) $10

- Rb20 starter motor $50

- Hornet scoop ( has had fibreglass repair and resprayed white ) $100

- VL afm $20

- VL dizzy complete $50

- VL alternator $50

- VL coils X 2 $10ea

- VL fuel regulator $30

- VL coolant temp sensor $20

- VL tps $20

- VL power transistor $10

And a few other random things...

- Playstation 1 console w/black controller + memory card + cords (no power cord) $10 SOLD

- Lotus Elan sales brochure circa late 80's (collectors item) $10 SOLD pending payment

- Palsonic 51cm tv w/remote $50 SOLD pending payment

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • I have always resisted the urge to go silly. 8" wide wheels and street friendly spring rates? Check. (Let's not talk about the steadily increasing spread of spherical joints across my suspension!!) Stock turbo, run at 12 psi? Check. Lasted for ?10 years before it died. Highflow put on rather than seizing the opportunity to go G45. You don't need 300 rwkW, let alone the more massive numbers that seem to be essential these days, to have a car that is already way too powerful and fast for a streeter. ~250rwkW is fine. I've never exceeded 200, although I will sneak up above it if and when I manage to get my finger out and do what needs to be done to use the highflow's capacity. You don't need $10k worth of CF bits glued onto the outside. You don't need razor sharp ankle cutting front splitters. You don't need the car to be 2" off the ground. You don't need flawless paint, mirror finished wheels, brand new indicator lenses, etc etc. All these things just make the car impractical and will cause you pain when they get damaged, which is inevitable for a street car. A few nice additions are good. Good seats are good. A nice stereo is good. A/C is good! (46° on the road yesterday and my A/C is degassed again. Was moderately traumatic driving home!) The main reason I stick with a mildly modified old Skyline is that I have had it for  >25 years, the mods are the rolling result of 25 years of things dying and being upgraded opportunistically, coupled with a few "just 'coz" ones. And I hate modern almost all cars. If I was a young buck starting out now.... I wouldn't bother. Cars have a few years left where there is any possibility of interest or fun. Thereafter there will be no such thing allowed or possible. Any time, money and effort spent now on a project would just be a waste.
    • Let's be wary though, if cranking is so far off, what else isn't set right? Are the dead times set right, voltage compensation etc?   It definitely sounds like it's cranking fuel issues, and holding flat to the floor is shutting them down, but I'm with Duncan that if nothing was changed in the ECU at all, and then this started, I'd be more thinking a leaking injector.   Do as Duncan said, drop the oil and make sure it's not full of fuel.
    • It actually means give it less throttle.
    • Yeah if the goal is to drive something then modifying a car is a bad idea.
    • Wowee! She looks like a major handful out there Pete!
×
×
  • Create New...