Jump to content
SAU Community

Recommended Posts

hey guys im trying to find the best place to run the vac line through the fire wall or at least get it inside the car and im having no luck. can some one with a 34 shed some light in how they ran the line in to the cabin???

ta

Ash

Link to comment
https://www.sau.com.au/forums/topic/252033-r34-boost-gauge-install/
Share on other sites

hey guys im trying to find the best place to run the vac line through the fire wall or at least get it inside the car and im having no luck. can some one with a 34 shed some light in how they ran the line in to the cabin???

ta

Ash

Hi mate, seeing as you bought the guage off me I thought I best shed some light on the installation process.

I own a R33, but most Nissans and particulary Skylines are all generic.

Most skylines in the drivers side wheel arch have the wiring loom bung which connects the fusebox in your kickpanel, next to the accelator to the fusebox under the bonnet.

If you turn your wheel full lock right and remove the inner guard plastic thing (if you have one) you will see some black plastic piping along with some other assorted wires (most likely aftermarket alarm wires)

If you pull the bung out you will have access to your cabin, this is how I have set mine up.

I suggest getting a coathanger, cutting it, and zipting the vac hose to one end of it and poking it thru, (screwdriver or any other long non-bending thing works well too)

Then its just simply a matter of hooking it up under your bonnet, then running the vac to your gauge where ever it is in your cabin and ziptieing the excess hose out of the way from sight and feet near the pedals!

Goodluck any other questions shoot me PM or post here!

I might mention to get it into your drivers side wheel arch, you need to run it back towards the firewall behind the RHS strut tower, you will find a few holes there, or just a large one just run it thru there,

One other thing, ziptie it to your loom, so it doesn't come loose and hang onto your tire and wear thru (or get ripped out)

:down:

Don't R34's have a stock boost gauge...?

really??? oh so thats what that is.....

lol

im running more boost then stock so need an accurate read out.

thanks wlade666 ill give that a go :down:

all the series 1 r34's had boost guages i thought and the series 2's had the computer... which i would like to have seen in real life not just a pic, i heard they dont always work. the stock boost guage is anoyn i recon coz its hard to read... and convert to psi or something im more fimiliar with

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Oh, that's grim. Something bad has been happening there.
    • Put an endoscope down the hole and saw this. Not quite all around the bore but a good 60% at least. Chin to the chest and towards further disappointments I guess.
    • 2 does "sort of" applies, maybe......but looking at what parts would be needed for the swap to get engineered, registered, and insured, and basically that's everything under the car, the modifications the make it legal would be problematic and horrendously expensive, all for a street car that just cruises around and hits a few twisty roads on the weekends Also, from looking at the NSW rules and Regs, with all modifications that is required just to make the car safe and not twist itself to pieces, and then actually get registered for street use, may still be impossible nowadays As for 1, when you add in a fresh engine, fresh transmission, rear cradle and diff, tailshaft, suspension, brakes, cooling, and all the other fabrication required, your probably looking at up to $100k to do it right, all for a 20 year old MX5 that is over engineered and you would never be able to actually use the power it has on the street, much like your beastie, which I love, but you actually track that thing and can use all of its powers in anger, in a safe environment  Hell, the old Bogan Cruise Ship had more power than I could use on the street, and in hindsight, I went a bit silly on that thing, it didn't really need the 500hp it had for what I actually used the car for, it was fun, but basically unusable on the street if you value your licence  As for cams, yeah, I'll probably book it in for them to get installed and tuned soonish, like next month after MX5 Mania are back at work....... and yes, I've already sent a email to bin the turbo quote and quote instead to install cams and a new Fluidampr balancer that will suit the 2.5 better than the OEM 2.0 balancer that is swapped over for the 2.5 install, as the balancer needs to get pulled to time the cams it's a while your in there sort of thing I did think a bit about flex fuel for a laugh, but being na, and no where really around locally anymore to get E85, I've binned that idea, so no sweet sweet corn smells are set for the car I wish E85 was more of a standard fuel, it's better for the environment, better for tuning, plus that sweet sweet smell we all love As for fitting in the family, that's not needed, as everyone in the family already owns a car that can seat 5 humans comfortably enough, the MX5 is "my toy" As for buying a car that is already built, nah, I would rather pick and choose my parts, I enjoy the process, and in the big picture, the additional cost is well worth the enjoyment, and the occasional frustration, I get out of doing it, albeit with other people spinning the spanners, and me, just paying the invoice 🤣
    • Excuse me, but 2) does apply 1) Would also apply if you consider how much is spent in the alternatives. Also there's the option of 3), buy one pre-built that you can put your family in (it's me, it's my car)   That said, I went on a ~500km drive the other day. I didn't use anything more adventurous than 3rd/4th gear at about ~3000RPM and 50% throttle and I was going as fast as anyone has any sense doing on a public road, with enough grip to the point where I didn't want to go any faster. I was obviously under the limit of the current car etc etc. MX5 with 2.5 N/A to achieve the same speed would be more fun for any road scenario. Maybe consider cams. I wouldn't boost it. The use case is just not there and it won't actually make the car more enjoyable unless you really do plan on wringing gears from 1st to 3rd (at least) at 100% WOT on a public road to 150+kmh.
    • Great if: 1. You had all of the money for everything else that is required  2. Lived in a country where you could actually do this and drive it legally on the road Sadly, neither applies to me As for the turbo, I am having second thoughts, mainly for engineering/registration legality reasons and insurance  Not saying I've finished doing stupid things that I probably should do to the MX5, but boost, and V8 engine swaps isn't on the cards Strange, but true 
×
×
  • Create New...