Jump to content
SAU Community

Recommended Posts

Series 2 you mean?

There is no gearbox other than the RE5 that bolts up to our orphan, I need to swap the sump so the bolts line up on the 350x box, and the starter fits. There is a lot of mechanical work before I even get to the electronic side. :/

The 350S was a series one car...

Sounds like a lot of work. Don't envy you. Starter gets moved to the other side, right?

3 times what I spent on the 350z box though. To fit the R34 gtr box you would either need the floor pan modified extensively and a new gearbox support made, or the transfer case would need to be spaced out 200mm or so off the back of the box.

Add that to the adapter required for RB to VQ, and buying a new twin plate Nismo clutch... I just can't afford it. :/

Floor pan mods are fairly straight forward, but tricky when you have to remove seats, carpet, sound deadener, looms, and then fit them all back...

Gearbox support is fairly straight forward, as a hybrid can be made between the GTR/Stagea

Custom Tailshaft required ($$$)

Gearbox Adapter would be a PITA to make from scratch, but can be bought for $,$$$...

You would have to use the GTR drive shaft to the stag diff (or get a custom one made)

Would take a fair bit of time and dollars including the purchase of the box itself.

Not to mention getting the ATTESSA clutch oil pump and all the other stuff working.

Why not Rwd ?

Massage the guards to fit some wider rubber

350z box and id say twin turbs if it has created more space presto

The rear guards will actually take quite large rubber; it has always been the limitations in the front (to keep ATTESSA happy) that have dictated the rear tyre sizes.

IIRC, several years ago, whilst auditioning rims; bbenny had 19x10.5s under the rear of his.

The only reason they didn't stay, was the issues with the ATTESSA going bezerk due to rolling dia differences with the front 19x9's & mismatched tyres.

Daleo 10.5" rear bags....

Interesting...

Well then

Apart from having total control being manual.transmission.

Myself the idea of a motec harnessing the full potential of the vq25det without that killjoy auto tranny ecu would prove irresistible.

Want to buy my 350z box and Nismo twin plate coppermix clutch now Toby? :P

I will get around to it eventually, one day when I am bored. Still searching for manual V35 interior parts... I am contemplating just using the 350z console and adapting the handbrake to work. Not sure what it would look like though.

I've always thought if I decide to heavily modify my PNM35 I'd just go RWD and 350Z manual box, but you really have to weigh up the cost of getting the car to a state you're happy with in terms of fit and finish vs the cost of sourcing and bringing in an Autech 350S. I guess you guys in Aussie have to worry about complaince though so it's probably not an option for you.

The nice Autechs fetch a tidy price. And your stuck with the shitty dash, not our nice one.

The cheaper ones are flogged out, I think its much better getting a S2 and converting. Even better if you have a RWD S2 car.

  • 3 weeks later...

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • Right, here's a video of the basic operation at least.  This is what you can expect day to day when you turn the car on and it boots from standby.  The only thing from a media point of view I haven't gotten working is for it to autoplay plexamp when it turns on from standby (it works from cold boot) but that's more of a plexamp problem as it will autoplay other music players.  Also attached is my one stray cable.  It's part of the screen's wiring adapters but there's just nowhere for it to go in my car.  I've just now done a bit of research and found a matching port on a 2010-2014 head unit with BOSE.  Mine has no BOSE so that's that case pretty much closed I think.  Plugging in the Infiniti AC panel basically did nothing for me, so that's a dead end as well.  Next port of call is to mess with this CANBUS module and see what I can find from it.  I found this resource containing the DBC files for a 2010+ G37 : https://github.com/icecube45/Dash_InfinitiG37/blob/master/InfinitiG37.dbc I'll now have something to go from when I try to extract my CANBUS data so I can see if the HVAC Mode, Fan Speed, Temperature, etc. match and also the gear shifter position.  It's a pretty big assumption that it's just mismatched CAN signals but considering all the devices in the CAN network are talking to each other (AC can be fully adjusted just with no info on screen) it might be a safe one.  I will report back WhatsApp Video 2025-02-26 at 12.49.10.mp4
    • Thanks for that Paul.  Do you think if I posted a picture you'd be able to remember where it went? 
    • Sorry Duncan, I didn't get a notification for the replies.  Thanks for responding!  It's a full Android device, but does allow you to use CarPlay/AA as well.  This is the one I bought from NaviRS on AliExpress: https://www.aliexpress.com/item/1005006368602668.html?spm=a2g0o.order_list.order_list_main.111.59aa1802JDzQ0E - the 2K 8G-256G CAM variant but it seems to have gone up by £170 since I bought it!  My purchase was £307.14.   It's not the fastest thing in the world but performs perfectly adequately.  It stays on standby unless I disconnect the battery and let it power down, then it's just a fairly standard Android bootup time from cold.  The DSP Equaliser is very nice and made the standard stereo system sound pretty decent compared to the stock screen.  Perhaps I can take a video of it when I get a sec. It *allegedly* supports the reverse camera, but I'm yet to get that working.  It has options for reverse cam (a camera unit can be bought separately) or 360 cameras (also bought separately).  To be fair it doesn't seem to detect that the shifter was put into reverse but I'm working on a theory about this as well.  At the moment I'm going without which is a bit annoying considering the car is an absolute canal barge but so far I haven't caused any damage I'll grab a picture of the wire I'm missing later today when I can get outside.  My theory, by the by, is that not only is the head unit different, but the CANBUS network has different signals for the different years.  I think this because I have a spare AC panel from a newer Infiniti G37 (as opposed to my Nissan panel) which wouldn't control anything except the volume when I had it wired up with the stock system.  I'm going to throw it back in and see if the screen will respond to it.  I've just ordered an arduino CANBUS module so I can have a look at the signals going around the car and see if I can spot anything.  I'm thinking if I can work out what it's expecting vs what it's getting I might be able to translate and relay the signal back but so far just a theory anyway. I also found this on my travels, so far the only one that specifically matches my car: https://www.aliexpress.com/item/1005002822934280.html?spm=a2g0s.imconversation.0.0.33433e5fgttovi If you look at the picture of the before, it has the card reader slot, and the picture of the head unit is exactly the same as the one pictured in my original post.  I asked if they sell the cables separately but sadly they won't.  I didn't want to just buy this one because it's a super old Android version and only dual core - likely slow as hell. 
    • As above, you did refill the coolant and burp the system before running it again didn't you?
    • To be fair - you see the same thing for every clutch. There's always someone making an installation error.
×
×
  • Create New...