Jump to content
SAU Community

Recommended Posts

Hi everyone! had nistune installed onto my r34 (Neo engine) with auto tranny and the dyno results showed 233hp (12 psi)at the wheels.

I have stock turbo and engine, 3in exhaust with 3.5 catback to cannon. FMIC, air filter, EBC, custom oiler cooler and radiator, HKS BOV. Now after seeing everyone's postings on their dyno results, im thinking is my results too little?? 233hp whereas similar setup, the other guuys are getting at least 210rwkw. Im not sure if there is anything wrong

2ndly: My aim is about 400hp atw and I am going overseas where I will be able to get my hands on parts at a relatively cheaper price so wanna get some advice on what parts i should get. Roughly, im getting a upgrade on my injectors(500cc or 600cc?), fuel pump (bosch 044) and a GT-RS turbo. is there any other recommendations from you guys on what i should get to achieve that aim? Reliability is my top priority as it is my daily car. :cheers:

Link to comment
https://www.sau.com.au/forums/topic/252117-dyno-result-normal-or-too-little/
Share on other sites

boost peaks at 12psi cos i have been reading alot that for the stock turbo, the safe tune would be at 12 psi. did thought of pushing it to 14psi but wouldnt want the turbo to die on me too soon thus had it at 12 psi. you reckon its safe to have it at 14 psi? but i dun thrash the car all the time by the way.

^^

yeah he said he had a nistune remap.

Sounds about right, i've got a 34 neo with nistune, split/dump, stock turbo with r32 actuator set at 10psi and getting around 170rwkw. It's begging for more boost though.

200rwkw @ 12psi is where it should be. +/- 15rwkw for dyno differences and you really aren't too far away from there and you are running through an Auto so sounds spot on overall

Best way to tell is at a dyno day really, everyone on the same dyno, same day is the only real decent way of telling if your tune is low on power easily.

You can compare maps/timing and so on but each car is different so it become tricky.

As for 400rwhp/300rwkw, a GT-RS really isnt going to get to that. I think there was one or two cars that made that figure and no-one elese has come close so probably high figures as most seem to make closer to 260-270rwkw which is about the limit i'd push a stock motor anyhow.

Plenty of threads on 250/270/300rwkw setups, so have a search around

well, could be the auto box losing another 10-15hp for me. well, after spending on the nistune and ebc, i really was expecting about 240 hp. (215hp prior to installation but has a really shitty AFR) 180kw was a tad little disappointing. but oh well, since im not too far away, i shall keep working towards it. will be getting another turbo, injectors and fuel pump when i go for my hols in feb. will see how it goes. but shd be getting a high flow cat next week. will scan the dyno paper tomorrow at work and let you guys have a look.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Ha ha ha! I know those feels mate I've finally got the garage cleared enough that next weekend I'll do some actual work on my car (hopefully). Unfortunately garage isn't usable after 10am at the moment That said, I've done a lot of work this weekend on helping finalise a friend's Production Race car. Full started Christmas Eve. We're down to about 8 tasks on the list, including "get a wheel alignment". Sometimes it's just easier working on someone else's car or project than our own stuff 😛
    • Ha ha, ended up going it alone.  I just sent it (in a very nervous fashion).  Once I'd released the locks and it didn't automatically start spinning out of control i felt a bit more confident.   It made some loud sounds (cracking and creaking noises) when I first spun it which got the heart rate going again!  I couldn't bring myself to leave it tipped on the side.  I feel a bit more comfortable having back right side up while it sits there. I'd get angry with your last point but you're 100% correct! 😅 Even yesterday I managed to distract myself at numerous times to make a bracket to fit an LED flood light off the back of the house and fix my sons pushbike.  There were other little taks nibbling at my brain for the rest of the day too...
    • Probably one of the more nerve wracking experiences of my entire life! 😂😂 The balance (centre of gravity) is out still but in a direction that gives me comfort!   It's quite bottom heavy still meaning it takes a bit of muscle to rotate it.  The plus side of that is that it wants to to go back to upright.  Better that than wanting to go all stranded turtle on me!
    • hmmm that's not ideal. This is a pretty new engine right, will be interesting if your engine guy has any theories about causes
    • A universal ball joint removal c press kit is better money spent and will work for the Hicas ball joints.  Here's a 45$ CAD Example. ATPEAM Heavy Duty Ball Joint Press Kit with 4WD Adapters | Professional 4 in 1 Ball Joint Press Removal and Installation Tool for Cars and Trucks | Universal Ball Joint Tool with Storage Case, Ball Joint & Tie Rod Tools - Amazon Canada
×
×
  • Create New...