Jump to content
SAU Community

Recommended Posts

Update Post from my previous one, as the Engine has been replaced along with a few other mods (BBS Wheels, Exhaust System).

Looking at selling my GTR. I have only had it for a month after having been looking at purchasing it for a while. Finally after purchasing it, an opportunity has come up (to build my first house). I may need to sell the GTR to help finance this project. It is going to be my first house so after outweighing the situation I have decided that a house is a tad more important :(

Main parts that stand out are the OS Giken Gearbox (cost a tad over 7k to build new), OS Giken Triple plate clutch, -10 Turbo's, Fuel System and Sump.

Make:1996 GTR V-Spec

Colour: Midnight Purple

ENGINE

Trust Sump & Baffle

INDUCTION

Garret 2560-10 Turbo's

Sard 720cc Injectors

Apexi Pod Filters

FUEL SYSTEM

Custom Surge Tank

Bosch 044 Fuel Pump

Sard Fuel Regulator

Braided Fuel Lines

ELECTRONICS

APEXi Power FC with hand controller

Blitz DSBC Boost Controller

EXHAUST

Tomei 3" Dump Pipes

Custom 3" with twin mufflers

DRIVELINE

OS Giken 5 speed gearbox

OS GIKEN triple plate clutch

NTERIOR

Nismo 320km/h speedo

Momo steering wheel

Price: $35,900

STRICTLY NO TEST RIDES. I am happy to take interested parties for a test drive, if a deposit is received then the party interested can take it for a test drive.

Please no silly offers, if you're serious feel free to PM me with a 'reasonable offer'.

Pics of car with the modded engine and BBS wheels can be seen on the following link (better quality pics to appreciate the condition of the car).

http://www.allblitz.com.au/cars/gtr800hp.htm

post-14128-1231737621_thumb.jpg

post-14128-1231737730_thumb.jpg

post-14128-1231737768_thumb.jpg

post-14128-1231737783_thumb.jpg

post-14128-1231737837_thumb.jpg

post-14128-1231737866_thumb.jpg

post-14128-1231737885_thumb.jpg

post-14128-1231737903_thumb.jpg

Edited by allblitz
Link to comment
https://www.sau.com.au/forums/topic/252194-1996-r33-gtr-vspec-purple/
Share on other sites

Had a minor tune to run in the standard rb26 engine (purchased from @ Rampant Imports). Going to get a full tune next week. Minor tune made around 245-250 kw's at all 4 wheels. Should make 280-290 comfortably at all 4 with full tune.

  • 2 weeks later...

its heart-breaking stuff mate. Seeing a car as good as yours and not a single bite. Its just plain crazy. All the best with the sale mate, hope you can move it quickly without suffering too much on price. :D

I was looking at this but I think its now not a complete package as it once was. You have sold the Giken g/box but still have a high power motor.

To run that power with a stock box is not a long-term option.

Nice paint work though.

291awkw is easy for the gearbox, its the driver thats the problem

Agreed, I've seen cars with well over 350awkw with standard box and no dramas.

Back on topic, car is for sale and is at a bargain price.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • I mean, if you were to move the jacking points away from the original location, that is, away from the wheels and closer to the centreline of the car, then it will be more likely to overbalance and tip off the supports. Same as we talked about before. I was talking about moving for-aft. If the sill is bent outward or inward, then the car would obviously look unstraight from the outside. Hopefully that hasn't happened either. Again, you can do comparative measurements from the chassis rails to see if there is much deflection.
    • Can you elaborate what you mean with your first sentence? I meant move as in the bulge kinda seemed like it got pulled "outward" meaning it got pulled down and to the side with the jacking rail itself, so the load bearing bulge now sits lower than usual and is not level with the sill on the other side of the jack point. Either that or the jacking rail just got pushed in a good bit.
    • As well as being risky WRT tipping off anyway. Yeah, I wouldn't expect it to move. Just measure from the rear one to the front one on the good side, then measure that same length on the wrecked side. You will find the notches in the pinchweld, and the jacking pad. Just spray a spot of marker paint or something there.
    • but any other area than the bulge you are talking about will just cave in then? The front driver side is pretty bent so I don't know if that will work the way it is now. I can still kinda make out where that bulge is/was but it looks like the position of it also changed due to all the mistreatment? Hard to tell
    • Absolutely. Look very closely at the photo (of yours) that I took my second snip of. See how the sill is thicker material right behind the pinchweld, where the two notches are? That is the factory reinforced area for lifting. That pad is supposed to carry the weight. The factory jack (go look at it, and how it interfaces with the car at the pinchweld) shows you exactly how the load is carried from the car to the jack to the ground.
×
×
  • Create New...