Jump to content
SAU Community

Recommended Posts

Hi Guys,

Looking for some advice for someone with a bit of experience, when i clean my car and do the wax and yada yada it looks super clean, but when the sun hits it or u look at it under a light there are swirl marks and billions of little scratches (all very light) how would I go about removing these, they crap me of grrrrrr. Looking for specific product names and tools you use, and how can i reduce the swirl marks in the future, what is mainly causing these, is it my sponge, my microfiber towel etc etc.

As usual all help is appreciated in advance.

Thx G's.

Link to comment
https://www.sau.com.au/forums/topic/252282-car-detailing-help-me/
Share on other sites

mainly the scratches can come from the sponge you use when washing the car.

I use mostly all autoglym products as they seem to be the best I have used. The autoglym car wash, follwed with the Ultra Deep Shine, then the super resin polish.

Gets all those scratches and swirls right out.

Im thinking of using the "Ultimate System" from mothers has anybody tried this. What it is is a pre wax cleaner from mothers then followed with a sealer and glaze and finally using their pure carnauba wax. Does anyone have anything to say about any of these products.

Yeah, im actually gonna clay bar the car first to pick up all the crap and get rid of over spray then im going to do the rest, but whats the easiest way to get rid of swirls and micro scratches. I think ill just get the clay bar system and i think its enough, because you get the clay bar, that instant detailer thing, basically used to moisten the clay bar and a wax and that should do it, but i'd like to get rid of all the swirls and gagilions of little scratches u can see under a bright light. Whats the easiest way to get rid of these scratches.

Edited by AlexR34

Go to Final Inspection and check out the forums there. Plenty of detail about techniques, tools and products to use.

What I do on my cars is:

Wash - Random $15 car wash

Dry with Waffle Weave Microfibre Drying towel

Clay - Clay Magic Blue

Wash Again

Dry again

Polish with Menzerna Intensive Polish (I think its called) and a Bosch Random orbital with a Blue Edge Pad. I've also got Menzerna Final Finish and a White Edge pad if the swirls aren't too bad.

Wax with P21s paste wax

Seal with Zaino Z2

This will normally last a good 6 months before it needs doing again ;) Definetly get onto Final Inspection and order some gear from them. All the products they stock are the best :action-smiley-069:

I use all microfibre clothes on my car and a microfibre wash mit for washing the car. 1 for body n 1 for wheels. This helps minimise scratches from washing the car :D

Enjoy and hope you get your car looking smick :D

mainly the scratches can come from the sponge you use when washing the car.

I use mostly all autoglym products as they seem to be the best I have used. The autoglym car wash, follwed with the Ultra Deep Shine, then the super resin polish.

Gets all those scratches and swirls right out.

I think i use Autoglym polish too, its awesome.

Go to Final Inspection and check out the forums there. Plenty of detail about techniques, tools and products to use.

What I do on my cars is:

Wash - Random $15 car wash

Dry with Waffle Weave Microfibre Drying towel

Clay - Clay Magic Blue

Wash Again

Dry again

Polish with Menzerna Intensive Polish (I think its called) and a Bosch Random orbital with a Blue Edge Pad. I've also got Menzerna Final Finish and a White Edge pad if the swirls aren't too bad.

Wax with P21s paste wax

Seal with Zaino Z2

This will normally last a good 6 months before it needs doing again :( Definetly get onto Final Inspection and order some gear from them. All the products they stock are the best :(

I use all microfibre clothes on my car and a microfibre wash mit for washing the car. 1 for body n 1 for wheels. This helps minimise scratches from washing the car :(

Enjoy and hope you get your car looking smick :D

Yeah ill follow your instructions and ill do all this next week and then ill post pics up of how it looks and what products i used, before you freak out it will be a picture of a 2002 C200 Merc not a skyline i sold that a while ago lol. So yeah next sunday i shall post pics up, the only reason im not gonna get the products that you are recommending is because i can't be stuffed shopping online lol.

Alex,

I think you'll find the little scratch marks are called spiderwebs. Well thats what we call it. It is caused from either the spounge or cloth you are using to clean the car. IMO your always gonna get them because water will never removed all the dirt before the wash.

When we buff cars, we will clean the car first, leave the car wet and use a cutting compound to cut into the clear coat that will remove those so called marks. The we'll wash the car again, and there is a few different steps we will take to seal the polish and apply the wax.

The wax will fill-in the swirl marks left by hand polishing or machine polishing. You will always get swirl mark no matter how you polish a car. Different products do different jobs.

My advise would be to get a decent cut, to cut into the clear (no to heavy) then apply your final wax/swirl remover to finish.

If your car is a dark colour the marks will stick out like dogs balls but thats just the way it is.

I use a product from 'Autosmart' is not avalible on the retail shelves i dont think but if your up this way drop me a line and ill help u out.

Cheers Matt

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • The rain is the best time to push to the edge of the grip limit. Water lubrication reduces the consumption of rubber without reducing the fun. I take pleasure in driving around the outside of numpties in Audis, WRXs, BRZs, etc, because they get all worried in the wet. They warm up faster than the engine oil does.
    • When they're dead cold, and in the wet, they're not very fun. RE003 are alright, they do harden very quickly and turn into literally $50 Pace tyres.
    • Yeah, I thought that Reedy's video was quite good because he compared old and new (as in, well used and quite new) AD09s, with what is generally considered to be the fast Yokohama in this category (ie, sporty road/track tyres) and a tyre that people might be able to use to extend the comparo out into the space of more expensive European tyres, being the Cup 2. No-one would ever agree that the Cup 2 is a poor tyre - many would suggest that it is close to the very top of the category. And, for them all to come out so close to each other, and for the cheaper tyre in the test to do so well against the others, in some cases being even faster, shows that (good, non-linglong) tyres are reaching a plateau in terms of how good they can get, and they're all sitting on that same plateau. Anyway, on the AD08R, AD09, RS4 that I've had on the car in recent years, I've never had a problem in the cold and wet. SA gets down to 0-10°C in winter. Not so often, but it was only 4°C when I got in the car this morning. Once the tyres are warm (ie, after about 2km), you can start to lay into them. I've never aquaplaned or suffered serious off-corner understeer or anything like that in the wet, that I would not have expected to happen with a more normal tyre. I had some RE003s, and they were shit in the dry, shit in the wet, shit everywhere. I would rate the RS4 and AD0x as being more trustworthy in the wet, once the rubber is warm. Bridgestone should be ashamed of the RE003.
    • This is why I gave the disclaimer about how I drive in the wet which I feel is pretty important. I have heard people think RS4's are horrible in the rain, but I have this feeling they must be driving (or attempting to drive) anywhere close to the grip limit. I legitimately drive at the speed limit/below speed the limit 100% of the time in the rain. More than happy to just commute along at 50kmh behind a train of cars in 5th gear etc. I do agree with you with regards to the temp and the 'quality' of the tyre Dose. Most UHP tyres aren't even up to temperature on the road anyway, even when going mad initial D canyon carving. It would be interesting to see a not-up-to-temp UHP tyre compared against a mere... normal...HP tyre at these temperatures. I don't think you're (or me in this case) is actually picking up grip with an RS4/AD09 on the road relative to something like a RE003 because the RS4/AD09 is not up to temp and the RE003 is closer to it's optimal operating window.
    • Either the bearing has been installed backwards OR the gearbox input shaft bearing is loosey goosey.   When in doubt, just put in a Samsonas in.
×
×
  • Create New...