Jump to content
SAU Community

Recommended Posts

  • Replies 80
  • Created
  • Last Reply

Top Posters In This Topic

Shit, and here i am at home with two used Jun pumps.. i wouldnt mind this option, but considering i was going to do drysump later on i may give it a miss..

i'll keep watching how its going just incase!!

:)

Put me down as a definate :)... F#ck paying $2400+ for a tomei pump and still be worrying.

Hopefully this buy starts sooner rather then later.

Few q.

-Stock capacity sump vs larger? much diference?

-Baffling?

Tomek

Few q.

-Stock capacity sump vs larger? much diference?

-Baffling?

2nd that :thumbsup:

I would recommend a larger sump with baffles for this as it still uses the stock pickup although modified for the external pump.

What you need to remember is that this is replacing the crank driven pump, so will help with the known weakness of cracking the drive on the internal oil pumps.

The more oil that you have in the sump the better.

I am having a guess but you should still do the other mods for oil control to the head (i.e. restrictor).

Guest
This topic is now closed to further replies.



  • Similar Content

  • Latest Posts

    • I have one and it was at ~43.5PSI.
    • Put a pressure gauge on the fuel rail.
    • I've uploaded logs / the current map to Gdrive if anyone has any ideas. https://drive.google.com/drive/folders/1FPnr22Z-EilG7tYdHSi0Qb07P2jfFLKV?usp=sharing
    • I'm running a Haltech Platinum Pro with the stock map for the RB20DET + tweaks for my build. When I started it this morning, the IAT was at 32F/0C (Outside temp was ~42F) and the AFRs went off the scale for my AEM gauge. I let it run for ~30 seconds then turned it off. I then did a smoke test, by hooking into a vacuum line directly behind the throttle body, and confirmed there was no leaks ( i let the smoke tester run for ~5 minutes / confirmed it was generating smoke before hand ). I then started the car again, after fixing a power steering leak.... and it seemed to be happy for ~30 seconds (was at ~11/12), but then seemingly shot back up to ~18 again. I then let the car run for a few minutes, thinking this was just cold start related, but the AFRs never came back down. I didn't let the car fully warm up, so maybe this makes sense, but I'm not sure what to do? The AFRs, when I last ran it, were normal, but because of personal reasons I haven't been able to break in the car. It was rebuilt last year. Engine / Mod list: Supertec pistons Spool rods Kelford 270 cams and Springs Stock crank Deatschwerks 900cc injectors Walbro 255 (Wired directly to the battery relocated in the trunk) NKG Audi R8 Coil packs + Conversion Harnesses from Wiring Specialties Holset HY35 turbo Haltech Platinum Pro ECU Haltech boost controller (wired in for high boost RB25 Neo transmission + needed bits for the speedo to work  
×
×
  • Create New...