Jump to content
SAU Community

Power Enterprise (pwr) Injectors, Esp 700cc

Phatboy

By Phatboy,
in Engines & Forced Induction

 Share

Recommended Posts

The Dan Grand Master

The Dan

Posted
Posted
hahahahahaha you get funnier with each post Daniel.

give up pal.

I aim to please.

You southerners always say give up but you have not really provided any proof that I am incorrect other than to say you have a mate in marketing who says it's an old trick. Gee I must be wrong if he said that.

I spoke , in person, to a rep from the company and then a couple of hours ago I spoke on the phone to another one. I asked if the injectors were just an off the shelf Denso item. He said absolutely not!. He said again that they were made by Denso to their specs. I asked him to put something in writing so I could show you but he told me not to waste my time with wankers and he doesn't care if you don't want their injector because of it. He said they have nothing to prove or gain by doing such a thing.

So this is an apology to you if he is lying to my face and if the guy in the states is lying to me over the phone. I am sorry if they are lying. But until you can PROVE that I am incorrect and they are lying to me, then why don't YOU give up and stop giving people misleading information. At least my comments have foundation to them.

The Dan Grand Master

The Dan

Posted
Posted
Ferrari pal vrrom vrrom

---------------------

Suprised some over zealous god moderator hasn’t closed this shit down.

I believe it would be important to reveal the outcome of my investigation. I will wait to hear what Denso have to say. I think it is important information that everyone can benefit from. I'm not here to sling rocks at Dirt, I just want proof when someone says I'm wrong.

Mushroom Veteran

Mushroom

Posted
Posted

Umm from a third person viewing this all i have seen so far is:

3lit3 32 made some phone calls to some what substanuate his claim that these items are made by Denso to a cetain spec as specified by Power Enterprise.

Dirt Garage has said this is crap and PE only make the packaging for this, but not been able to back it up with any more proof.

I think the person asking the question has the information that yse they are a quality injector, now he needs to make a decision if he wants these instead of nismo ones, unless someone else has some proof to provide.

Swiper the Fox Grand Master

Swiper the Fox

Posted
Posted (edited)
I aim to please.

You southerners always say give up but you have not really provided any proof that I am incorrect other than to say you have a mate in marketing who says it's an old trick. Gee I must be wrong if he said that.

I spoke , in person, to a rep from the company and then a couple of hours ago I spoke on the phone to another one. I asked if the injectors were just an off the shelf Denso item. He said absolutely not!. He said again that they were made by Denso to their specs. I asked him to put something in writing so I could show you but he told me not to waste my time with wankers and he doesn't care if you don't want their injector because of it. He said they have nothing to prove or gain by doing such a thing.

So this is an apology to you if he is lying to my face and if the guy in the states is lying to me over the phone. I am sorry if they are lying. But until you can PROVE that I am incorrect and they are lying to me, then why don't YOU give up and stop giving people misleading information. At least my comments have foundation to them.

he was reluctant to give you anything in writing because they know its all marketing crap...nothing more. He had everything to prove by releasing the information, he could have shown how their product is different/superior to everyone elses...but he chose not to. Actual proof that your product is superior in performance is a marketing bonanza...thats everything to gain from a profit point of view and would give them a hand over their competition. Instead he chose to be mature and call someone a wanker. Dan c'mon you must be able to smell a rat? Im not e-battleing with you over it...im over it. Ill order an injector and test them...i dont need to ask for a line off some PR guy on the phone etc.

you have your opinion and i have mine.

be friends shake hands and lets move it on ok.

its nice to be nice :happy:

Edited by DiRTgarage
R31Nismoid Grand Master

R31Nismoid

Posted
Posted
Ferrari pal vrrom vrrom

---------------------

Suprised some over zealous god moderator hasn’t closed this shit down.

Now why would i close it down Josh?

You QLD'ers always provide solid entertainment no matter what section its in.

R31Nismoid Grand Master

R31Nismoid

Posted
Posted
lol e-battle!

so does anyone have a price comparison on the pwr items vs sard?

It often depends on the supplier, if you check across nengun, greenline and various other places ive found sometimes one place has a better price than the other so it pays to shop around before buying

badhairdave Proficient

badhairdave

Posted
Posted

At the end of the day if denso are supplying an injector to sard and it has the same P/N as an injector supplied to PE then it's the same injector.

If they've changed it it'll have a different p/n

Someone make with the part numbers.

Phatboy Mentor

Phatboy

Posted
  • Author
Posted
make sure you get the plugs with them as they are not the same as sards :)

can make sard plugs work if you cut off some lugs

used 700 pe's on a customers r34 gtr with no probs get a replacement connector

however turned in to nightmare

Whoa, holy shit?!?

If I understand correctly, you mean 700cc PEs into R34 GTR did not turn out well?? Can you please elaborate? Or PM me? I am due to get them installed tomorrow!

Thanks.

Swiper the Fox Grand Master

Swiper the Fox

Posted
Posted
At the end of the day if denso are supplying an injector to sard and it has the same P/N as an injector supplied to PE then it's the same injector.

If they've changed it it'll have a different p/n

Someone make with the part numbers.

precisely Dave.

the part numbers are identical

Phatboy Mentor

Phatboy

Posted
  • Author
Posted
I think the person asking the question has the information that yes they are a quality injector, now he needs to make a decision if he wants these instead of nismo ones, unless someone else has some proof to provide.

Thank you.

Nismo_Boy Grand Master

Nismo_Boy

Posted
Posted
Now why would i close it down Josh?

You QLD'ers always provide solid entertainment no matter what section its in.

What gave you the idea I meant you, Ash? There are two other moderators for this section. One I know for a fact dislikes my online persona a lot more then you.

Of course we would provide solid entertainment. It's the heat you see.

1400r Veteran

1400r

Posted
Posted

"make sure you get the plugs with them as they are not the same as sards

can make sard plugs work if you cut off some lugs

used 700 pe's on a customers r34 gtr with no probs getting a replacement connector

however turned in to nightmare"

errr?

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing


  • Similar Content

  • Latest Posts

    • PranK
      Best Skyline ever

      By PranK · Posted

      But, do I have to? 😬
    • PranK
      My BMW E39 528i touring

      By PranK · Posted

      While doing my tailgate struts I found some rust. Also replaced my bonnet struts. Such a cool satisfaction with that job.
    • PranK
      Should I use rust converter on this?

      By PranK · Posted

      So I removed as much as I could from both sides. The shop vac did a great job of clearing 99% of it. I got it all as clean as I could and then absolutely drenched the whole lot in the rust converter. Tonight or tomorrow I'll hammer it again. The cavity must be close to 400mm in length and surprisingly I was able to get it right to the back.  I'll quickly reassemble and then pretend I never saw it. I'll post pics (for me to ignore later) soon.
    • fatz
      Beers and skylines Fatz style

      By fatz · Posted

      Yea she is a hoot to drive 
    • GTSBoy
      Help Understand GTT Boost Setup

      By GTSBoy · Posted

      I have always resisted the urge to go silly. 8" wide wheels and street friendly spring rates? Check. (Let's not talk about the steadily increasing spread of spherical joints across my suspension!!) Stock turbo, run at 12 psi? Check. Lasted for~?10 years before it died. Highflow put on rather than seizing the opportunity to go G45. You don't need 300 rwkW, let alone the more massive numbers that seem to be essential these days, to have a car that is already way too powerful and fast for a streeter. ~250rwkW is fine. I've never exceeded 200, although I will sneak up above it if and when I manage to get my finger out and do what needs to be done to use the highflow's capacity. You don't need $10k worth of CF bits glued onto the outside. You don't need razor sharp ankle cutting front splitters. You don't need the car to be 2" off the ground. You don't need flawless paint, mirror finished wheels, brand new indicator lenses, etc etc. All these things just make the car impractical and will cause you pain when they get damaged, which is inevitable for a street car. A few nice additions are good. Good seats are good. A nice stereo is good. A/C is good! (46° on the road yesterday and my A/C is degassed again. Was moderately traumatic driving home!) The main reason I stick with a mildly modified old Skyline is that I have had it for >25 years, the mods are the rolling result of 25 years of things dying and being upgraded opportunistically, coupled with a few "just 'coz" ones. And I hate almost all modern cars. If I was a young buck starting out now.... I wouldn't bother. Cars have a few years left where there is any possibility of interest or fun. Thereafter there will be no such thing allowed or possible. Any time, money and effort spent now on a project would just be a waste.
×
×
  • Create New...