Jump to content
SAU Community

Recommended Posts

Yeah RadCam is mint. Too easy Nd awesome pic. Initial battery charge takes forever. I thin that's where a couple of whinges have come from, lack of charge.

Hardwired the pov and have never needed to think/worry about battery charge!

Hardwired the pov and have never needed to think/worry about battery charge!

The good thing with the Radcam is that is already comes with a free 12 volt car charger and you have the advantage that it will still keep recording even if the power is disconnected e.g. in an accident. If that happens with the POV, then the clip will be corrupted.That's why I don't recommend the power pack for the POV.

Ok, so if I was to get the radcam what would be the best way to integrate a gps based data logger with it? I like the idea of the vbox, although in this digital age don't know if I could live with no HD.

Basically will the radcam integrate with a data logger and have the one sd card with all the info and video footage on there?

I use TrackVision to put data over my video. Put your datalog, and video into the software and sync it, and you get the video+gauges out the other end.

Edited by sav man

I use TrackVision to put data over my video. Put your datalog, and video into the software and sync it, and you get the video+gauges out the other end.

Herer's a good exapmle of just that with a RadCam

Thanks Mark for checking my link out.

I am using DashWare http://www.dashware.net/ which is $50 (bit less with the strong dollar), and a QStarz BT-Q1000eX 5Hz GPS Logger (about $199).

Its simply a matter of syncing the video and data in DashMate and setting a start finish point, then chosing (or making your own gauges).

Its more difficult for rally defining your start and finish points, but if your just circuit racing you just define the start/finish point and it will calculate your laps, and you can choose to ignore out and in laps etc.

the QStarz GPS also comes with good software for analysis called QRacing. which will overlay 3 laps at a time and give you analysis which may help for getting your times down.

I use the old Go Pro camera, the non HD one , comes out allright apart from the sound , thats why i use my Iphone to record the sound , then sinc it with the video at home , comes out nice !

Youtube does lower the quality abit though.

All im seeing is videos from inside the car, any $300+ camera can do that efficiently.... where are all the external videos?

You mean from track side? Its not that easy to get someone to stand in the middle of no where for a day to film for 30 minutes in the forest!

BUT

About 0:45 is our car and again at 2:10 you have to hear it!

Im hoping to get a few 'dedicated' guys some cameras and place them through the stages.

We've used the Radcam extensively both for out of car and in car. If you check out our youtube channel (www.youtube.com/puremotorsport) you'll find a lot of footage.

RaceRecall are easy to deal with and the kit you get really provides you with everything you need. Suction mounts are amazing for drifting!

I am using DashWare http://www.dashware.net/ which is $50 (bit less with the strong dollar), and a QStarz BT-Q1000eX 5Hz GPS Logger (about $199).

Its simply a matter of syncing the video and data in DashMate and setting a start finish point, then chosing (or making your own gauges).

Its more difficult for rally defining your start and finish points, but if your just circuit racing you just define the start/finish point and it will calculate your laps, and you can choose to ignore out and in laps etc.

the QStarz GPS also comes with good software for analysis called QRacing. which will overlay 3 laps at a time and give you analysis which may help for getting your times down.

So is it actually a simple process? ie able to be done by the average bear

And I take it that Dashmate is basically an "enabler" that lets you combine the two lots of data

If so, how/where do you get the input of rpm/throttle/brake?

Or do you just run with a GPS data feed which will presumably show speed and G?

It would be a good thing with a breadcrumbs style overlay showing either track position, or location through a special stage. GPS feed should allow that to happen too?

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • After drying a few days, time to put her back together 
    • The hot exhaust light will come on not from just the cat being blocked, but it's just a temp sensor, and it's designed to warn you to not do things like park in long grass.   If you've been pushing the motor a bit, it can cause the light to come on.   Second if the cat is rattling, I'd suspect it's not blocked, but instead falling apart inside.   The easiest "fix" until you can get a cat put back in, is to unbolt your one, bash the rest of the insides out, and then bolt it back in.   For a daily driver/street car, I am in agreeance of put a cat in the car. If it were race car I wouldn't care if it were removed.
    • No worries at all 🫡 I think the most satisfying things to make are the little bits that are just impossible to find or they're no longer manufactured. Generally I always try to replace parts with OEM wherever possible. This little project is also great because it'll never see the light of day, but strengthen these brackets so it's not just relying on the little standard screws in the headlight plastic. As soon as I saw the standard brackets and screws I thought, "well I'm not going to install with just the screws, the plastic tabs will just snap off". It's crazy how expensive everything has become yeah. But I suppose that's supply and demand; granted it's a lot easier to get brand new genuine parts these days which is fantastic 😊, I don't have to get totally reamed at the local Nissan dealer ha ha We sure are lucky we have all these manufacturers making parts these days, a few really great Australian companies too like Platinum Racing Products and Fit Mint Automotive, what a time to be alive ❤️ . I've got my eye on the RB26 head by PRP as mine has a very fine hairline crack, so that'll need to be addressed some time in the future. If you have any requests or odd things to make feel free to let me know and I can have a crack at making replacement parts ✌️
    • Thanks for sharing this, and BTW if your headlights are in good condition they are worth thousands....you might want to consider replacing them with brand new LED ones like this (https://www.nengun.com/78works/full-led-headlights-r32-skyline) and making enough profit to buy a house in Sydney
×
×
  • Create New...