Jump to content
SAU Community

Recommended Posts

do all jap cars have 180km/h speed limiters eg: nm35 axis , and how are they removed, do jaycar make a kit, they make about everything else ???? :cool:
No just cars intended for the Japanese domestic market. In manuals you just cut the appropriate wire but for autos you need a device such as my GReddy Speed Limiter Cut Controller ($160 roughly) which will do the job. Jaycar don't appear to make one. You can get the speed limit removed with some major re-chips or of course with an aftermarket computer.
do all jap cars have 180km/h speed limiters eg: nm35 axis , and how are they removed, do jaycar make a kit, they make about everything else ???? :cool:

If you are going to install a piggyback ECU, I believe that the eManage Ultimate can override it.

Did you end up getting that white Axis Alan?

If you are going to install a piggyback ECU, I believe that the eManage Ultimate can override it.

Did you end up getting that white Axis Alan?

still , in the pipeline at the moment cam , fingers crossed , waiting on some shares i've cashed in, got out on financial advise it was going to crash, down to the solicitors now , maybe a couple of weeks , then i'll have a definate ?????? :P

No just cars intended for the Japanese domestic market. In manuals you just cut the appropriate wire but for autos you need a device such as my GReddy Speed Limiter Cut Controller ($160 roughly) which will do the job. Jaycar don't appear to make one. You can get the speed limit removed with some major re-chips or of course with an aftermarket computer.

hey mate, what is this "appropriate wire" you speak of? is it hard to find? has anyone on here with a manual sII done it before???????? please please please :P :P :rofl: ill be your best friend if you tell me how

P.s. it would really shit my mate off that has a 33 coupe :/

hey mate, what is this "appropriate wire" you speak of? is it hard to find? has anyone on here with a manual sII done it before???????? please please please :(:(:( ill be your best friend if you tell me how

P.s. it would really shit my mate off that has a 33 coupe :D

Well your mate's 33 coupe is probably wire 53 but I'm sure a search in the Skyline section will confirm that. I had a quick look at the pinout diagram for Stageas (you'll find it in the DIY section under ECU) and the most likely suspect is the wire on pin 29 which is where my greddy speed cut thingy is connected. In my car I hit a wall at 180 (it could vary according to how accurate your spedo is, what size wheels and tyres etc) but since putting the whatsit on the ECU i have had 180 - 190 at the Taupo A! GP track and just over 190 at Manfield. I was looking forward to Pukekohe next month where i should have been able to get well over 220 on the back straight but unfortunately my car is no more. Have to wait til i build my next one.
i've taken mine over 180kmph (the needle just kept going)

and i dont seem to have anything attached to my ecu :(

You and me both.

I guess that the needle would have hit 195kph if there were numbers that far.

I do know that my speedo shows 7kph high out due to 18's, but could the original speedo be out 10kph?

No just cars intended for the Japanese domestic market. In manuals you just cut the appropriate wire but for autos you need a device such as my GReddy Speed Limiter Cut Controller ($160 roughly) which will do the job. Jaycar don't appear to make one. You can get the speed limit removed with some major re-chips or of course with an aftermarket computer.

I think that only applies to maybe R33s or newer, I know the r32 autos still work with the wire cut, 52 or 53 is the one :D green and yellow?

you hit a wall at 180 ? phsyically ? or with the computers speedo cut ...

yeah, as soon as mine used to touch the dial, it used to pull back the fuel and start shuddering like a son of a b*tch

Well your mate's 33 coupe is probably wire 53 but I'm sure a search in the Skyline section will confirm that. I had a quick look at the pinout diagram for Stageas (you'll find it in the DIY section under ECU) and the most likely suspect is the wire on pin 29 which is where my greddy speed cut thingy is connected. In my car I hit a wall at 180 (it could vary according to how accurate your spedo is, what size wheels and tyres etc) but since putting the whatsit on the ECU i have had 180 - 190 at the Taupo A! GP track and just over 190 at Manfield. I was looking forward to Pukekohe next month where i should have been able to get well over 220 on the back straight but unfortunately my car is no more. Have to wait til i build my next one.

Thanks mate! and nah i wont be worrying about my mates 33, although he will start asking questions if we do a midnight run out to the beaches and i fly past him at 200+ lol :D

wire 29 you reckon hey? well ill check it out on the ecu thing anyways,

Cheers

hey mate, what is this "appropriate wire" you speak of? is it hard to find? has anyone on here with a manual sII done it before???????? please please please :(:P:( ill be your best friend if you tell me how

P.s. it would really shit my mate off that has a 33 coupe :)

powerfc cuts it nicely.

I dont quiet get why people want to remove the speed cut on their cars.....

180 is plenty fast enough as it is(havnt even hid speed cut in mine) . Plus its bad to push it that hard and spin out top gear.

Isnt it all about how fast and how much it throws you back into your seat...

I dont quiet get why people want to remove the speed cut on their cars.....

180 is plenty fast enough as it is(havnt even hid speed cut in mine) . Plus its bad to push it that hard and spin out top gear.

Isnt it all about how fast and how much it throws you back into your seat...

Removing speed cut is not a necessity for the road (unless you are in Germany) but it does not do any harm - you can do 180 in third and in fourth 200 is not really revving hard. BTW I don't suggest trying these speeds on public roads and not anywhere if you haven't done some basic improvements to your suspension and wheel alignment - the standard setup could have you struggling to keep it on the road at illegal speeds. It is a necessity for track days unless you like being passed by slower cars that don't have speed limiters.

thats why i want the speed limiter removed for track days , plus i've had vast experience with advanced driver training in the past so im im quite capable at handling high speed driving , NOT IN ANYWAY WOULD I CONDONE DRIVING FASTER THAN THE RECOMENDED SPEEDS ON OUR PRISTINE ROADS !!!! ;)

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Yeah, the latter. No diff should have a centre replaced without checking clearances because its unlikely to be the same as whatever came out. Not that that stops most people just checking a new centre in
    • Major thread necro but how bad of a job is it to DIY? Looking at it online it looks like if you reuse your ring and pinion as long as those are in good condition it should be fine to just pull the axles/front cover and replace the diff that way? Or should I be replacing everything and doing preload measurements/gear mesh testing like the factory service manual mentions for the rear diff?
    • in my list I had the R33 GTR as the best Skyline. Infact I had all GTR's (33>34=32), the NSX, the GTO, the 300ZX, the 180SX, the S15 better than the FD RX7. I had the MR2 and the A80 as 'just' better. I also think the DC5R Integra looks better but this is an 01 onwards car. I also think the FC>FD. It's almost like aesthetics are individual! The elements @GTSBoy likes about the FD and dislikes about the 180 are inverse in my eyes. I hate the rear end of the FD and it's weird tail lights that are bulbous and remind me of early hyundai excels. They are not striking, nor iconic, nor retro cool. The GTO has supercar proportions. I maintain these look much better in person (like the NSX) especially with nice wheels and suspension which is mandatory for all cars pretty much. Some (or all) of these you have to see in person to appreciate. You can't write a car off until you see one in the flesh IMO. Like most people we probably just like/dislike cars which represent certain eras of design or design styles in general. I also think the 60's Jag E type looks HORRIBLE, literally disgusting, and the 2000GT is nothing to write home about. FWIW I don't think the Dodge Viper Gen1's have aged very well either. You can probably see where I rate bubbly coupes like the FD. I know we're straying now but the C4 and C5 absolutely murder the Viper in the looks department as time goes on, for my eyes. Wouldn't surprise me if people who love the FD, also love the MX5, Dodge Viper, Jag E Type, etc etc.
    • I used to hate R31s, and any of the other Nissans that led up to it, and any of the Toyotas with similar styling, because of the boxiness. They were, and remain, childish, simplistic, and generally awful. I appreciate R31s a lot more now, but only the JDM 2 door. The ADM 4 door (and any other 4 door, even if they are unique compared to our local one) can eat a bowl of dicks. The Aussie R31 is also forever tarnished by their association with stereotypical bong clutching Aussie R31 owners of the 90s and early 2000s. I think the Nissans of the 70s (other than 120Y/180B/200B) are far superior looking to the 80s cars. The 240K era Skylines are boss. The same is broadly true of Toyotas. Hondas don't ever register in my thinking, from any era. Mitsus are all horrid shitboxen in any era, and so also don't register. Subarus are always awful, ditto. Daihatsus and Suzukis also don't generally register. They are all invisible. I think the SW20 MR2 looks fiddly. The 3000GT/GTO is like that but way worse. Too many silly plastic barnacles and fiddly gimmicks ruined what could have been a really nice base shape. Kinda-sorta looks like a big heavy ST165 Celica coupe (and I'm not sure if that's a good thing or a bad thing). I think the 180SX is dreadfully bland. It's not bad looking. But it has no excitement to it at all. It's just a liftback coupe thing with no interest in its lines, and bad graphical elements (ie wide expanses of taillight plastic on the rear garnish). The S13 Silvia is a little better - getting closer to R32 shapes. But still....bland. S14? Nope. Don't love it. S15...a little better. Probably a lot better, actually. Benefits from not being like a shrunk in the wash R34 (where the S13 was a shrunk in the wash R32 and the S14 looked like a Pulsar or something else from the stable on Nissan mid 90s horrors). The Z32 was hot as f**k when it came out but hasn't aged as well as the A80. Keep in mind that I think the R33 is the most disgusting looking thing - and out of all the previous cars mentioned is objectively closest to my precious R32. It's just....real bad, almost everywhere you look. And that is down to the majority of what was designed in the 90s being shit. All Nissans from that era look like shit. Most other brands ditto. In that context, the FD absolutely stands out as being by far the best looking car, for reasons already discussed. Going behind the aesthetics, the suspension alone makes it better than almost any other car.  
    • If they just called it the "Mazda Tiffany", it would have been spot on.
×
×
  • Create New...