Jump to content
SAU Community

Heavy Rims

and3_3
 Share

Recommended Posts

nisskid Grand Master

nisskid

Posted
Posted

yes, added unsprung weight and rotational inertia will effect your performance of ur suspension, acceleration, and braking.

big? depends on ur definition, id certainly focus on a lot of other things before i spent big $$ of ultra-lightweight wheels, but i would stay away from heavy wheels.

personally i look for a strong rigid wheel which is relatively light, when u buy a heavy wheel they are often not only heavy but weak.

Link to comment
https://www.sau.com.au/forums/topic/252628-heavy-rims/#findComment-4368845
Share on other sites
GTS4WD Grand Master

GTS4WD

Posted
Posted

Weight is also relational to size. Stick to a smaller 16 or 17 inch rim. It is possible to find fairly light wheels in these sizes at a decent price.

And as above. Yes. Pretty big impact.

Again, lightweight attractive wheels in a good sieze = $$$$. Best go a smaller rim, thats not heavy but not "light" and spend the money elsewhere to make up for the additional unsprung weight

Link to comment
https://www.sau.com.au/forums/topic/252628-heavy-rims/#findComment-4369014
Share on other sites
djr81 Grand Master

djr81

Posted
Posted
Hey all,

I've got some to my experience with rims some very heavy ones, the advanti 3 spoke ones. My question is do heavy rims make a big impact on handling performance and straight line speed?

Cheers guys

Handling? Yes.

Straight line speed? No.

The way to understand it is pretty straight forward. You may think the springs in your suspension hold the car up off the ground. But what they actually do is hold (Push if you like) the wheels onto the road. The heavier the wheel is the less capable the suspension will be of maintaining an even amount of force on the road after the wheel hits a bump. That is why (Simplistically anyway) a bad set of wheels can disrupt the handling of a car.

Link to comment
https://www.sau.com.au/forums/topic/252628-heavy-rims/#findComment-4369648
Share on other sites
Medium Dave Proficient

Medium Dave

Posted
Posted (edited)

A few years ago i was reading a magazine (Wish I could remember which one now for reference) where they took a stock evo and gave it to a professional driver who posted some very consistent times around a track. Then the put some very expensive lightweight wheels on (same tires) which he then took out for a few laps - the result, only a few 10th's of a second quicker.

Oh, and as for the increase in sidewall issue, take into consideration a formula 1 car tire - massive sidewall...

Edit: Sorry, I re-read my post and thought it sounds a bit arrogant - just trying to back up the idea that they will make a difference, but not a big one, not trying to start an argument :D

Edited by Medium Dave
Link to comment
https://www.sau.com.au/forums/topic/252628-heavy-rims/#findComment-4372152
Share on other sites
nisskid Grand Master

nisskid

Posted
Posted
A few years ago i was reading a magazine (Wish I could remember which one now for reference) where they took a stock evo and gave it to a professional driver who posted some very consistent times around a track. Then the put some very expensive lightweight wheels on (same tires) which he then took out for a few laps - the result, only a few 10th's of a second quicker.

Oh, and as for the increase in sidewall issue, take into consideration a formula 1 car tire - massive sidewall...

Edit: Sorry, I re-read my post and thought it sounds a bit arrogant - just trying to back up the idea that they will make a difference, but not a big one, not trying to start an argument :(

lol F1 tyres are a tad different to street tyres mate.

Link to comment
https://www.sau.com.au/forums/topic/252628-heavy-rims/#findComment-4372743
Share on other sites
scathing Grand Master

scathing

Posted
Posted
A few years ago i was reading a magazine (Wish I could remember which one now for reference) where they took a stock evo and gave it to a professional driver who posted some very consistent times around a track. Then the put some very expensive lightweight wheels on (same tires) which he then took out for a few laps - the result, only a few 10th's of a second quicker.

What wheels before and after?

If I remember correctly Evos come stock with either Enkeis or BBS rims. Both of which tend to be reasonably light and strong already. So going "lighter", unless you managed to score magnesium or carbon fibre rims, isn't going to be as big a gain as with the same-as-a-Maxima cast wheels (or pig iron Tempe Tyres nuggets).

Any single mod that can pull a few tenths is still a good gain. In a car that's already reasonably well designed, you'll only find a little time per mod.

As an aside there's more to wheel performance than just weight. Rigidity can make as much of a difference. Have a read of this.

Link to comment
https://www.sau.com.au/forums/topic/252628-heavy-rims/#findComment-4373243
Share on other sites
Roy Grand Master

Roy

Posted
Posted

Ok, cant say much about handling because it was on the street so dont throw it around....but acceleration in my car was far worse when i had my 18" cast Lenso wheels (13kg each) on compared to my 17" forged Weds (6.7kgs each)

The difference in acceleration was dramatic, the 18" Lensos lasted about 3 months and then i sold them as even for street rims i didnt like how doughy my already compromised car felt

Link to comment
https://www.sau.com.au/forums/topic/252628-heavy-rims/#findComment-4373270
Share on other sites
br3ndan Mentor

br3ndan

Posted
Posted

i would have to agree with all of the above ... light weight rims do make a difference..

im running p1 buddy club racing rims.. which are about 6.XX kg per rim. 17 inch tho...

i think it would be best if u look @ these kind of rims if your more on the performance side then the cosmetic side.

i feel that there is no need to go above 17inch rims for performance side of thing...

17 inch rims still can fit nice brakes behind them...

Link to comment
https://www.sau.com.au/forums/topic/252628-heavy-rims/#findComment-4373688
Share on other sites
nisskid Grand Master

nisskid

Posted
Posted
Volk GTP's 17x9.5 on my gtr are lighter compared to the stock 16x7 r33 gtst rims with stock tyres. The GTP's are among the lightest of the forged rims.

not really, they are very light (ive had a set myself), but not amongst the lightest.

Link to comment
https://www.sau.com.au/forums/topic/252628-heavy-rims/#findComment-4389217
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing


  • Similar Content

  • Latest Posts

    • GTSBoy
      R32GTR R200 reverting from Nismo centre to stock

      By GTSBoy · Posted

      I like it when the counter chick leads you out the back into the racks and says "have a grub around in here and see if you can find what you need. I'll be back in a few minutes. Just left me in front of a massive motorised shelving system and 2-3 million fasteners, so I could find a peculiar SS shoulder bolt with cap head. Gotta love country towns.
    • Piggaz
      R32GTR R200 reverting from Nismo centre to stock

      By Piggaz · Posted

      I used this https://osgiken.com.au/product/os-giken-os-250r-lsd-gear-oil-80w250-1-litre/   shut my nismo 1.5 pro up by heaps…. Not silent though. Gives the car character and personality. It ain’t a carolla. If you want silent, put a quaife in it.
    • MBS206
      R32GTR R200 reverting from Nismo centre to stock

      By MBS206 · Posted

      It's about the same time for me from Bunnings, or the Fasteners. My big push away from takeaway food, and gluten in general keeps me away from the Bunnings Snags too! Weather up here, I've been out for two walks today in the beautiful sunshine. Had a few little drizzles, and some wind, that honestly, a tin of beans and I could compete on how harsh she blows Thankfully, being this bit inland, we're not getting anything much really. Will probably pick up a bit more when/if Cyclone Alfie decides to come ashore. A few areas in the GC though, and south into NSW are really getting smashed though! Right now, I'm just annoyed Alfie hasn't hit, as I'm not allowed to crack into the BBQ foods like the bacon and eggs until the Cyclone hits "In case we lose power"...
    • The Bogan
      R32GTR R200 reverting from Nismo centre to stock

      By The Bogan · Posted

      I love fastener joints, the price difference between them and joints like Bunnings or Super Cheap is amazing, and they either have exactly what you want, or they can get it to quick They have even given me some for free when I only needed a couple of specific size In saying this, I have paid premium for fasteners from Bunnings if they have the sizes I need, but only for convenience really, as my local is only 10 minutes away, the Sushi joint near them is also a consideration  How's the weather Matt? Stay safe mate
    • joshuaho96
      R32 update from 1990's spec.

      By joshuaho96 · Posted

      Wideband is worth setting up if only for tuning purposes. I would not mess with the ignition system unless there's a misfire. HKS crank trigger is popular out here for the relatively easily sourced Denso crank sensor, not a bad idea to install as well regardless of power level on a standalone. Boost leak test is worth thinking about. Oil pressure sensor tied to a fuel cut isn't a bad idea either. Getting the tune figured out is a good idea. Without putting eyes on it and getting under it there's no way for us to tell you exactly what it needs but most likely you're down to the last 10% that will make a big, big difference in how happy you are with the car.
×
×
  • Create New...