How To Remove R34 Reare Bumper

[hotchoc]

As per topic, need to remove my R34 rear bar so i can have my dent fixed

Pics will be much appreciated if possible.

[Aggroman]

ill do a step by step because i did it just 2 weeeks ago..

1. undo the 2 screws in the rear wheel arches where it meets the rear bar (1 each side)

2. take out the black screw plug thing just under the rear number plate

3. take out the inner skin of your boot.

4. inside you should see a bolt about halfway between the rear wheel arch and the back following the bar line. (1 each side) one is hiding behind the jack so just take that out.

5. remove your number plate because it is too big to move the bar along, or just remove the whole thing its bolted to (2 screws above it)

Optional step. remove your tail lights, inside the boot there should be 3or 4 8mm bolts behind the tail lights. they are the only bolts there should be easy.

Dont forget when removing the bar that as you bring it off you will need to stick your hand down and unplug your reverse lights/ number plate light. Just twist and pull.. There should be 3 of them

p.s. just under the tail lights it has like a metal bracket? that the bar fits into, it holds it on under the lights, that just slots in and out.

Just take you time and it should pull off easily, if it gets stuck just have a look around and check there is nothing holding it.. Hope that helps mate

Edited January 16, 2009 by Aggroman