Jump to content
SAU Community

Recommended Posts

so, my mate, owns a VL calais turbo, was parked at the campbelltown IGA this evening.

when he returned to his car, he found this card on his windscreen, i have taken photo's

but they are shit quality and not worth posting.

on the front of the card, is the front of what looks to be a BMW, with ''HYPER TUNE'' written accross the top.

there is a border that reads ''NO RULES-NO TOOLS'' and ''LINE TO LINE 09''

on the back of the card, is a paragraph, that reads as follows

LINE TO LINE 09

NO RULES

FIRST TO THE LINE WINS

$2000 ENTRY FEE TO BE PAID

AT START OF RACE

$20,000 FIRST PRIZE

20 PARTICIPANTS ONLY

FIRST IN BEST DRESSED

TRACK DETAILS WILL BE

GIVEN UPON CONFIRMATION

OF YOUR ENTRANCE

ONLY A RACE FOR CARS

TXT THIS NUMBER ON

0404448524

INCLUDE YOUR NAME

AND YOUR WHEELS

WE WILL REPLY WITH DETAILS

NO RULES-NO TOOLS

it is written exactly as above, and is printed in colour, on a thick card, not paper, pretty well done imho.

what should be done, hand it to police on behalf of SAU? has any one seen these before?

Link to comment
https://www.sau.com.au/forums/topic/253300-organised-street-racing/
Share on other sites

  • Replies 117
  • Created
  • Last Reply

Top Posters In This Topic

Top Posters In This Topic

Posted Images

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • Hard to find reliable dyno results that help my selection   Thinking G30- 660 twin scroll 1.06   Problem is my current setup isn't imo terrible. This is the genuine flog it at the track tune so there is a few kws in it but pulled for track safety   Non VCT RB25DE home built and has baby 256 Poncams, 60mm throttle body. 90mm exhaust and decent ARC cooler with Emtron KV8 Would like to break 400rwkws on 20psi and want a bit more through the 4,000rpm range. New setup needs to beat attached dyno
    • Hey y'all, had some bad ball joints in my tie rods, so figured i'd just replace both inners and outers.  Went with the high-misalignment system from GKTech. My car's lowered so figured why not. M14 Super Adjustable Inner Tie Rod High misalignment S13 240sx/S14/S15/Skyline tie rod ends (12mm/14mm) Welp, took over a week to get the job done, but finally did. Took it on the maiden voyage today and... - The OE boots do not sit properly on the new inner tie rods - If you look at the photo in the link above, new ITRs are basically threaded all the way through the length of them, so best I could do was tighten the boot down with a screw-down hose clamp onto the ITR's threads. - There is a "whoosh"ing sound every time I turn the steering, seems like it could be coming from the air moving into/out of boots. Concerning, bc it'll likely pull in nasty shit from the outside when I turn... namely thinking of moisture. - Looking at the rack from the back of the car, under it, the left tie rod is straighter than the right. Right droops down a bit. - My alignment is way outta wack, that's expected. Taking it to get an alignment as soon as I can. - The big thing is that the steering isn't really "springing" back like it used to. Wondering if there's something tied to pressurization of the system that I managed to f**k up. This was supposed to be a 20 min job... why doesn't anything ever go right with these cars?
    • Thanks guys, toruqed down to 65ft-lb, or 88 n-m.  Now have other problems, will chronicle in another thread. You guys are the best, thanks for all the ugga duggas.
    • R serious becoming more of a weekend cars or collectors cars there are less on the road these days , but you sometimes come by one or two . we might have to start spotting the V serious to make up for the gap.  
×
×
  • Create New...