Jump to content
SAU Community

Recommended Posts

Custom, pure 100% BLACK Leather Interior (unmarked like new) for R33 or R32 Skyline. Will fit either 2 or 4 door Skyline.

Front seats are 100% soft Italian Black Leather Race Setas with custom low mount rails to fit R33 (or R32).

Rear seats are 100% leather, re-upholstered and modified from original.

Door trim are done in soft Black 100% Dear leather (optional, read below).

No expence spared on this job and will bolt straight in.

Front rails and seats are all ADR compliant as there is a Blue plate on car for the modification.

Located in Brisbane (South side)

Item Condition is BRAND NEW / perfect (I have done less then 1000km in them).

Reason for Selling: I'm am stripping my Show/Competion Skyline down and selling the parts.

Price and Payment Conditions:

Option 1 - $2000 for the Front and Rear seats (that is less then half price), or

Option 2 - $1500 and stock R33 seats (in okay condition)

Seats are currently in a Four Door Skyline. I will include the door trims in the sale if replacement trims are provided.

IF YOU ARE INTERESTED CALL ME ON 0414 575 676 or PM.

Thanks for looking.

Link to comment
https://www.sau.com.au/forums/topic/253441-r33-custom-black-leather-interior/
Share on other sites

weekly bump.

Don't miss out on these beautiful seats. If you ever thought about modifying the interior then save yourself a heap of money and check these out.

They have been properly made and are ADR compliant. No fake stuff all pure leather.

The rails are custom made (legal, ADR approved) and are as low as aftermarket seat can go.

These seats (front and rear) cost nearly $3500 to buy, mod and fit.

I'm in Brissy this weekend if anyone wants to inspect the quality.

T - 0414 575 676

PS. I prefer calls over PM, more personal and less BS.

DAMN T i wish u had told me bout the interior while u were here man lolz i would happily take the fronts and rears off ya hands if i could offload the cream interior that looks awesome mate.......

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • For sure the later RB26 variants had a different setup (6 cam voltage sender?), but the RB25DE/DET share the same ECU pinout/PCB footprint, and at the ECU plug it ends up being 'throttle sensor in' & 'throttle sensor out' (to A/T TCU) ...you stick a multimeter on these pins and you'll find them directly connected (0 ohms) ; I had an pair of Nissan ECUs on the bench long ago, and I noticed this throttle sensor in/out link, actually linked to an op-amp ...which was unpopulated on the NA board, but present on the T board and I went 'ah-ha!' in some moment of clarity... ...it wouldn't surprise me if they changed strategy here though (in the software and actual monitoring of this signal), because they did with other stuff (A/T signals).. and 0.45v as a trigger point makes sense, as that's what the external TCU units expect at idle ; kudos, thanks for that insight...I suppose it boils down to whether or not Consult can display real time data of that signal's voltage... ...in any event, it presents the same target...ie; rotate TPS unit to achieve 0.45v to suit both ECU&TCU, and where do you goto from there? Just disconnect TPSwitch connector and/or that plus TPSensor connector....or do you go for the throat and disconnect IACV solenoid and see if it still stalls? (probably throws a recoverable fault code and goes for default idle strategy?)...
    • I’m also conscious that e85 is slowly being phased out. Not all United’s have them anymore. Can’t take the risk of being low on petrol and assuming the servo will have it. 
    • MR HAMMER has said his piece. Painted up to avoid Rusty Rusty. Actually lines up well. (i.e it lines up the same as the unmolested GTR guard). Turns out the GTR Strut brace does foul on the bonnet vents ever so slightly. May need a little bendy bendy if intended to keep using with a strut brace. So spacing it out to clear the FAST102 is not an option. Annoyingly, the bonnet vents also foul on the heater lines running over the engine. Given this engine does not EVER require a heater, a delete loop is going to be used. Don't worry, the defogger uses the AC. The heater is basically "Do not use the aircon and turn the fan on". It will still be effective, I promise.... once I get the system regassed... Will have to revisit with unvented bonnet I suppose, and suitable strut brace. There's plans to do this and other things tonight and bleed brakes (there was a weep) and put the bumper back on, and take Good Friday morning - Because troubleshooting on the side of the road limping it home at midnight tonight is ... not very smart.
    • Thank you all for you assistance. I contacted Nistune regarding the support for the RB20DE along with my ECU Code (23710-10U00). They do have a map for it and added the RB20DE as a purchasable option now as well. They also added Malta as a Billing and Delivery options as this was missing. I was honestly amazed at their quick response and action, it took less than 24 hours. I also looked again at direct fit options for injectors, just in case I were to replace them. DeatschWerks seem to use a Bosch EV14 base and makes ones that fit mine at 440cc lowest, but also have 550cc at the same price. I tried looking for other direct fit options and managed to find one (also Bosch EV14 based) which includes a plug and play adapter on ebay. Did a small test with a Noid Light on the troubled injectors and all seems good, so they are pulsing properly electrically. One weird part is that they are missing on the same two cylinders as before I got the injectors cleaned. Mechanic also found this weird as he did not label the injectors and it is unlikely to have the faulty injectors be installed in the same cylinders.  
×
×
  • Create New...