Jump to content
SAU Community

Recommended Posts

I ended up changing a friends clutch in an r32 gtst over last thursday and friday arvo. Now the job in itself is straight forward except for 1 or 2 bastard bolts, but going to the effort of doing it on the floor in a car port to save a few hundreds bucks may not be worth it. The box weighs a friggin tonn. All i can say is if you have to take your r32 box out think twice because you could have yourself some very sore arms the next morning and you will have done a hell of alot of swearing while doing it.

Link to comment
https://www.sau.com.au/forums/topic/25348-replaced-r32-clutch/
Share on other sites

if u think the gtst box is hard and heavy try doing one on the r33 gtr then u'll swear a bit more . on the gtr to get to the top belhousing bolts u have to lower the engine box assembly first .the box is much longer than gtst and it weighs 90 kg but u can still do it on the floor with a trolley jack .

ive still got 2 bolts missing from the top of my g/box with no ill effects and its been like this for 4 months now of constant driving

i will need to get these put back in tho at a later date :)

btw is it the daiken excedy organic clutch? if so this clutch is great - ive found no problems with it at all and its great for everyday

kamikazer33 the top g/box bolts on the r33 gtst are doable even without droping the box . its only the gtr that u cant do unless u drop the box a bit . anyway i would do them as soon as possible u may snap other bolts as u have more load on them .

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • I’m also conscious that e85 is slowly being phased out. Not all United’s have them anymore. Can’t take the risk of being low on petrol and assuming the servo will have it. 
    • MR HAMMER has said his piece. Painted up to avoid Rusty Rusty. Actually lines up well. (i.e it lines up the same as the unmolested GTR guard). Turns out the GTR Strut brace does foul on the bonnet vents ever so slightly. May need a little bendy bendy if intended to keep using with a strut brace. So spacing it out to clear the FAST102 is not an option. Annoyingly, the bonnet vents also foul on the heater lines running over the engine. Given this engine does not EVER require a heater, a delete loop is going to be used. Don't worry, the defogger uses the AC. The heater is basically "Do not use the aircon and turn the fan on". It will still be effective, I promise.... once I get the system regassed... Will have to revisit with unvented bonnet I suppose, and suitable strut brace. There's plans to do this and other things tonight and bleed brakes (there was a weep) and put the bumper back on, and take Good Friday morning - Because troubleshooting on the side of the road limping it home at midnight tonight is ... not very smart.
    • Thank you all for you assistance. I contacted Nistune regarding the support for the RB20DE along with my ECU Code (23710-10U00). They do have a map for it and added the RB20DE as a purchasable option now as well. They also added Malta as a Billing and Delivery options as this was missing. I was honestly amazed at their quick response and action, it took less than 24 hours. I also looked again at direct fit options for injectors, just in case I were to replace them. DeatschWerks seem to use a Bosch EV14 base and makes ones that fit mine at 440cc lowest, but also have 550cc at the same price. I tried looking for other direct fit options and managed to find one (also Bosch EV14 based) which includes a plug and play adapter on ebay. Did a small test with a Noid Light on the troubled injectors and all seems good, so they are pulsing properly electrically. One weird part is that they are missing on the same two cylinders as before I got the injectors cleaned. Mechanic also found this weird as he did not label the injectors and it is unlikely to have the faulty injectors be installed in the same cylinders.  
    • Nice, let me know how you find the 98 tune
×
×
  • Create New...