Jump to content
SAU Community

replaced r32 clutch

Bleach1
 Share

Recommended Posts

Bleach1 Proficient

Bleach1

Posted
Posted

I ended up changing a friends clutch in an r32 gtst over last thursday and friday arvo. Now the job in itself is straight forward except for 1 or 2 bastard bolts, but going to the effort of doing it on the floor in a car port to save a few hundreds bucks may not be worth it. The box weighs a friggin tonn. All i can say is if you have to take your r32 box out think twice because you could have yourself some very sore arms the next morning and you will have done a hell of alot of swearing while doing it.

Link to comment
https://www.sau.com.au/forums/topic/25348-replaced-r32-clutch/
Share on other sites
wrxhoon Grand Master

wrxhoon

Posted
Posted

if u think the gtst box is hard and heavy try doing one on the r33 gtr then u'll swear a bit more . on the gtr to get to the top belhousing bolts u have to lower the engine box assembly first .the box is much longer than gtst and it weighs 90 kg but u can still do it on the floor with a trolley jack .

KamikazeR33 Grand Master

KamikazeR33

Posted
Posted

ive still got 2 bolts missing from the top of my g/box with no ill effects and its been like this for 4 months now of constant driving

i will need to get these put back in tho at a later date :)

btw is it the daiken excedy organic clutch? if so this clutch is great - ive found no problems with it at all and its great for everyday

wrxhoon Grand Master

wrxhoon

Posted
Posted

kamikazer33 the top g/box bolts on the r33 gtst are doable even without droping the box . its only the gtr that u cant do unless u drop the box a bit . anyway i would do them as soon as possible u may snap other bolts as u have more load on them .

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing


  • Similar Content

  • Latest Posts

    • sunsetR33
      Replacing turbo water line - any recommendations or advice?

      By sunsetR33 · Posted

      One thing I can tell you is, do it properly the first time. If you encounter unexpected problems just let the car sit for a week or two if you have to get some other parts or figure stuff out.  I'd have said go and use as many OEM parts as possible but since you want to change the turbo later on a custom kit is probably the better choice. Since I have no experience with RB25 just compare parts diagrams and images before buying a line kit and it should be easy to see if it has everything you need. Amayama has very good parts diagrams and part number lists, that is what I used a bunch to figure out what I might need. And don't forget to plan ahead and possibly renew other stuff that's easy to get to while you're in there doing the turbo lines. Happy wrenching
    • sunsetR33
      Unpeeling the Orange

      By sunsetR33 · Posted

      Update 4:   Hi all, good news. Engine is running and all the gaskets and seals seem to be working as intended. No leaks so far, even the JB Weld seems to hold. I flushed out the old coolant a few times and put in fresh coolant, not Nissan stuff, I decided to try the Ravenol Protect FL22, they claim it works for a wide variety of JDM cars and the opinions on it by some people were pretty good. And it has the nice poison green color! And man am I glad I bought a coolant system tester earlier this year, vacuum filling works wonders on this engine. I can definitely recommend this to anyone still doing it the old school way. All you need is compressed air supply. Will have to do a small test drive as soon as I can, I removed the gauge cluster again as the tacho needle was still bouncing around a bit but it was much better than before already.  I also found some cracks on all 4 tires inner and outer sidewalls. Apparently these tires should 't be parked on for extended periods or be kept under 0 degrees during storage, which I did not know. Clearly the previous owner didn't look into those details either, he probably bought them just cause they are cool semi-slicks. I'm just wondering how tf I am supposed to reach 30-80 degree tire temperatures on the public road consistenly, these tires were never going to work for my use case. I'll probably order Continental SportContact7 ones as these are the best allround summer tire available right now and I don't think I'll need anything crazier for now. Do let me know if you have experience with various tires and which ones you recommend.
    • sunsetR33
      Unpeeling the Orange

      By sunsetR33 · Posted

      You have no idea how many goddamn boxes I received these past three months haha Most have been put to use by now though, luckily
    • sunsetR33
      Unpeeling the Orange

      By sunsetR33 · Posted

      Not going to pretend I didn't do a bit of junky work this time around, but mostly due to the fact that some things I am not willing to spend days fixing right now, like wiring. I try to do most things properly the first time around.
    • sunsetR33
      Unpeeling the Orange

      By sunsetR33 · Posted

      Regardless of neglect or incompetence, fixing either is tedious and annoying. Most of the neglect on my car is definitely rust. I hope I can at least pass inspections later on and they won't fail the car due to slightly corroded hardlines. I was generous with rust converter and wax and it looks ok, most lines in the rear are hard to see properly anyways.  Definitely will test them though to make sure they don't rupture under pressure, in that case the car isn't going anywhere this year.
×
×
  • Create New...