Jump to content
SAU Community

Recommended Posts

Hyperdrive remapped my ecu.

R32 is 10psi stock, and my untuned ecu handled 14psi through the stock turbo and 12psi through the RB25 turbo (still didn't hit R&R but it pinged when on 14psi).

My guess for the misfiring is the coil harness, I had mucho problems and was swapping coil packs in and out. Turned out it was the plugs that go onto the coilpacks - the insides were falling apart. $120 for a new harness and it's mint :P

  • Replies 45
  • Created
  • Last Reply

Top Posters In This Topic

Hyperdrive remapped my ecu.

R32 is 10psi stock, and my untuned ecu handled 14psi through the stock turbo and 12psi through the RB25 turbo (still didn't hit R&R but it pinged when on 14psi).

My guess for the misfiring is the coil harness, I had mucho problems and was swapping coil packs in and out. Turned out it was the plugs that go onto the coilpacks - the insides were falling apart. $120 for a new harness and it's mint :P

cool,thats wat i wanted to hear!!

Any ideas where i might find one?? EBAY??

Also, nice video on youtube mate!! :P

lol cheers :( which one?:P

You can get them from Nissan but when I asked they had none in stock, was going to take 3 weeks to get here.

Ended up getting it from RHDJapan and with shipping worked out pretty much the same as buying it from Nissan but I got it in 1 week instead of 3 :P

I got the R32 GTR coil sub harness --> here

But likely due to our dollar sucking so much ass, they seem to be $275 delivered now :P

I'd ring Nissan and see how much they want..

i can ask my parts guy for a price and ill get back to you on that

hey dude, had any luck??

anyone else got any ideas on this thread?

our parts guy have been flatout for awhile so i didnt get a chance to ask him( everytime i go to his office, hes on the phone with a customer and some have talked right through lunch time or another call jumps in after he finishes the other).

ill get him 1st thing in the morning tomorrow and ill post it up when i get back from work

Definately recommened a Nistune and s1 turbo. If you have a spare bit of cash, get an EBC. You wont regret it!

If u r referring to an Electronic Boost Controller(EBC), i've got one of those.

Cheers R33 Nick, hear from u soon!

Just wondering.. are u using a pod filter? Cause previously on my car I had the similar problem.. all i had to do was take off the filter(apexi pod) and use a lightpowered airhose and blow out all the dust and stuffs.. ended up solving the problem but eventually changed the filter after a month :)

Just my2c.. hope it helps! ;)

*Edit* sorry didnt see u had mentioned having a pod :)

Edited by Slowpoke

Try cleaning you airflow meter sensor with some brake cleaner could be dirty and pull ur intercooler pipe off the turbo if there is oil in there your turbo seals could be causeing the problem, even try adjusting your timeing

My understanding is the standard R32 ECU adjusts timing on its own until it detects knock then adjusts it back abit, rinse and repeat.

Btw don't clean out your pod filters with an airhose it can damage the material, which is why K&N etc have cleaning kits for them.

The ecu has timing maps, that's where it gets its' timing info from.

The maps are relative to the base timing though, so if you adjust the CAS it adjust timing across the board.

No probs. I still think it's a spark issue (breaking down) as opposed afm or oil in cooler like that other guy reckons. When you have 20yo wiring/plugs, you would want to look at replacing them just for the hell of it (especially mission critical wiring).

yeah it seems to me that its the same problem i have, which is coilpacks. Its 90% chance to be the coilpacks and well they are worth replacing at any rate. Our cars are old, its worth going through and replacing things. Hence why I've got alot of lines and fittings etc that I'm in the process of measuring up to replace. 20y/o rubber and wiring needs to be replaced or checked at some point.

Might not necessarily be the coilpacks themselves, while it is common there can also be issues with the wiring associated with the coilpacks. I spent a few months troubleshooting a misfire and it turned out my 19yo coilpacks were fine but the plugs on the harness that connects to the coilpacks were falling apart.. everytime I took a plug off the insides would disintegrate more :down:

My stock coilpacks were so fine in fact, that I ended up selling the splitfires I got when I was troubleshooting.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Latest Posts

    • It can't be some stupidly proprietary video signal coming out of it that only Nissan's can understand. Surely you can just find some generic camera to stuff in there and use hot melt glue/blu-tac/gaffer tape to hold it in place if need be?
    • Update: Tunehouse looked into the problem and identified a wiring issue between the camera unit and the connector. They managed to get it working , but did warn me at some point it will stop working again. From their perspective it is unserviceable and will need replacement. They did some research and found that the new replacement camera would be Approx $1400 supply only (their fitting cost would be $190) . They did provide the part number (28442-JL05B) and a quick google of the part number shows that these are rather expensive brand new (seemingly no longer in manufacture) for the places that still have them in stock, with the used option potentially presenting  the same issue down the track at some unknown point. They are happy for me to supply the part so that they can fit it. Decisions, decisions... I can definitely recommend Tunehouse (thankyou Vee37!). Cost for the diagnosis was as quoted  ($190) , car was ready on time and communication was top notch. Their workshop is super clean and modern, and there was plenty of car candy parked out the front on the day I went.   Would definitely go back.   
    • to fix the voltage drop issue I swapped out the old 150amp alternator which turns out is a brand known for having issues and replaced it with the black 180amp alternator beside it 
    • For anyone interested, the Way Back Machine has that Japanese website archived with pictures, etc: https://web.archive.org/web/20051023225805fw_/http://www.a31cefiro.com/air_con.htm "Simply swapping the wiring of the harness will not allow it to function properly. For the outdoor air sensor and sunlight sensor, disconnect the wiring connected to CN1-11 of the air conditioning harness from the harness and connect the sensor side wiring to earth. For the indoor air sensor, disconnect the wiring connected to CN2-3 of the air conditioning harness from the harness and connect the sensor side wiring to earth. The connector PIN numbers listed here are the genuine A31 PIN numbers. To avoid incorrect wiring, check with a tester before wiring. Also, disconnect the wiring in a location close to the sensor. The disconnected harness side wiring will not be used, so be sure to insulate it." Wish someone sold a conversion harness to just plug-and-play a Kouki 180sx digital climate control into C33/A31. I'm decent with wiring but feeling kinda lazy about taking this on. Edit: Did some more digging and found a helpful Minkara blog post about the conversion as well: https://minkara.carview.co.jp/userid/1831116/car/1360568/2284209/note.aspx "After installation is complete or the battery is replaced, you need to go into self-diagnosis mode and set the internal air recirculation. The way to do it is to "hold OFF with the key on for more than 5 seconds, set the number to 5, then press 卍→C." ↑↑↑It probably won't make sense unless you actually try it (・∀・)." Lol wtf
    • Maybe SAUNSW could see howany members would do a motorkhana day if Schofield's is still available for a reasonable price...
×
×
  • Create New...