Jump to content
SAU Community

Recommended Posts

hi all,

i already have a pfc but running std afm now i have to upgrade afm to handle 380awkw around that mark so nismo options are about $800 so i was thinking why not just sell my pfc and get a d-jetro version? would this be a better option for cash wise and performance?

Link to comment
https://www.sau.com.au/forums/topic/253819-pfc-cross-road-normal-or-d-jetro/
Share on other sites

  • Replies 48
  • Created
  • Last Reply

Top Posters In This Topic

This is what you need to do.

Sell the power fc and buy a Vi-pec. Problem solved. Even with jetro your still limited. Vi-pec is your best plug in option.

Don't know about the Vipec?

Look here

http://www.skylinesaustralia.com/forums/Gu...ml&hl=vipec

and here.

http://www.skylinesaustralia.com/forums/Pl...ml&hl=vipec

This ecu is fast becoming the best plug in option for Skylines and other imports

This is what you need to do.

Sell the power fc and buy a Vi-pec. Problem solved. Even with jetro your still limited. Vi-pec is your best plug in option.

Don't know about the Vipec?

Look here

http://www.skylinesaustralia.com/forums/Gu...ml&hl=vipec

and here.

http://www.skylinesaustralia.com/forums/Pl...ml&hl=vipec

This ecu is fast becoming the best plug in option for Skylines and other imports

yep...i used to think the power fc was the be all and end all....now it looks old, slow and featureless.

Vi-PEC FTW all the features and processing power of a MoTeC M800 at a 1/5 of the price installed.

Edited by DiRTgarage

$800 for AFM's?

Nengun (last time i looked) had em for about $250-$300 less than that delivered... im thinking about buying some myself at present, hence i remember the price.

PFC all the way... but then depends on the tuner.

IDC what processing power it has, motec is beyond useless on a street car, its more of a pain than a factory ECU.

PFC wins for ease of use/speed of tune... but i cbf'd with another argument over it so dont you vipec lovers start

$800 for AFM's?

Nengun (last time i looked) had em for about $250-$300 less than that delivered... im thinking about buying some myself at present, hence i remember the price.

PFC all the way... but then depends on the tuner.

IDC what processing power it has, motec is beyond useless on a street car, its more of a pain than a factory ECU.

PFC wins for ease of use/speed of tune... but i cbf'd with another argument over it so dont you vipec lovers start

Ash...can't back you up on this one mate....you have no experience tuning a Vi-PEC...its so disgustingly easy and fast even you could do it. Hey its not as fast as you are with the ladies...but what is?

Super Tuner Mark Jacobsen at Godzilla said he never thought a plug in ECU could better the Power FC...he now admits that he was wrong.

Over to you Guilt-Toy...smash him.

Edited by DiRTgarage
Ash...can't back you up on this one mate....you have no experience tuning a Vi-PEC...its so disgustingly easy and fast even you could do it. Hey its not as fast as you are with the ladies...but what is?

Over to you Guilt-Toy...smash him.

Ye but ive got something better my friend!

The car that made you jizz your pants while you were down here though the hills of Dandenong... Powered by the ole PFC.

You think the processing power of a motec800 would make it go better?

:D

So get back here you!

$800 for AFM's?

Nengun (last time i looked) had em for about $250-$300 less than that delivered... im thinking about buying some myself at present, hence i remember the price.

PFC all the way... but then depends on the tuner.

IDC what processing power it has, motec is beyond useless on a street car, its more of a pain than a factory ECU.

PFC wins for ease of use/speed of tune... but i cbf'd with another argument over it so dont you vipec lovers start

lol...

Takes me between a hour to 2 hours to fully remap a power FC with datalogit.

http://au.youtube.com/watch?v=wys6yVF_o2Q

http://au.youtube.com/watch?v=HxKu9Uvt0sU

Takes 30 minutes with a vipec.

Power FC Cost from Nengun

Power FC $1416

Boost Controll Kit $600

Z32 AFM's $600

Vi-Pec Cost

V44 $1650

5bar Map Sensor $150

Turbo Smart Boost Sol $150

V88

$2250.

Plus the vipec has launch control anti lag and traction control inbuilt with wide band options, no can do with power fc.

The Jetro's are still a outdated power fc. get something that works better for cheaper. v44 will do :D

30mins would be a world record for a full tune on a car wouldnt it?

Once everything is setup and your tuning the load points it will take around 20 minutes or less to map the whole map, depending on how many load points you have setup.

Once you have done that power runs are quick and easy. usually 2 or 3 power runs is enough to get the mixtures right, then you need to work on the timing for peek torque.

Remember the Vipec has Wide band open loop & closed loop. you set the AFR and it does wonders.

I love my power fc's.. id rather tune them then any other computer (appart from a vipec)

You don’t need a Apexi boost control whatever, no-one I know is using one here.

Infact hardly and of the cars done @ racepace have EBC's :D

$600 saved, cheaper than a V88… so a V44 is only marginally more expensive, couple of hundred in it.

As for the rest, look I don’t rate anti lag, launch control, extra widebands/inputs etc etc for a daily street drive car… why?

Because im never going to use it. That’s what it comes down too for me.

Yeah its great to have a zillion features, but…

- if you cant use them legally

- without adverse afect to the car

- use them often enough to really 'enjoy'

Whats the point?

My tuner says PFC - I get a PFC.

A PFC costs me near enough to the same, that’s what im going to do (before the exhange rate drop, it was cheaper)

It works fine, it runs fine, better than a stock ECU… so whilst you might have a different view, and that’s fine. PFC all the way.

The sensor check and other screens tell me enough about what i need to know for general problem diagnosis, again better than a stock ECU

I know people that have had motec, autronic, link, whatever and have gone back to PFC so they cant be too bad

Also - the OP already HAS a PFC... i think thats the defining factor

PFC wins for ease of use/speed of tune... but i cbf'd with another argument over it so dont you vipec lovers start

Point proven yet? The above statement was not correct...shall i highlight some more?

we didn't even need to drag you into it kicking and screaming. You were a more than willing participant id say.

You are right though, if you want a basic ecu that runs the engine (and has its little gremlins) buy a power fc. If you want the best item that similar $$ can buy, you buy a Vi-PEC. You mentioned above that the Power FC can't be too bad...no one is saying its bad...i wouldn't have used one for all the years i had if it was.

There's an old saying i love and it goes a little something like this...

"If you want to find out how bad something is, ask someone who doesn't have one and/or knows nothing about it"

Seems to fit well right here.

Edited by DiRTgarage

i really wanna stay with a pfc because everyone knows how to tune and its got a heads up display well controller,

and

option A

spend $800 on two nismo afm or $600 on 2 z32 afm

or

option B

sell current pfc $1000 or so

buy d-jetro pfc with all sensors $1800

so still costs $800 but dont have the issues with afm's

whats going to give the better result with only a $100 differnce each way?

i really wanna stay with a pfc because everyone knows how to tune and its got a heads up display well controller

Vi-pec is soon to have a dash style interface that will make the handcontroller look like a children's toy. Display any engine parameter you like, programmable warning lights, peak hold, shift lights etc.

If Power FC is good for you and your tuner then thats the best choice for you.

I just like to stir Ash a little. :D

At least the AFM plugs arrived hehe - if i didn't id have been a bit more fired up (thanks for those, i owe you)

But he already has a PFC... so why waste time, effort, money. Stick to it.

And i never said the vipec was bad :P

Travis, as i said, Nismo AFM's are NOT $800

here, $600

http://www.nengun.com/nismo/air-flow-meter

I'm sure you could get them cheaper than that.

If you drive the car daily and so on, the l-jetro is the way to go... not d-jetro

The Nismo air flow meter is an upgrade to the standard air flow meter enabling high air flow measurement for modified vehicles. Please note this is not a Z32 AFM, these are available under the Tomei - Z32 AFM. Please note, you must purchase a quantity of 2 to replace both AFM's on the RB26DETT.

~$1200

at the end of the day the power fc is a toy. if you want a 300kw street wonder then thats all you need. If you want to take your car to the next level you need something else.

Autronic, Wolf, Vi-pec, Haltech, Link, Motec.. whatever it may be.. you need to move on and stop playing in the childrens play ground and get something worth while to move forward, took me a while to realise this.. I held onto that power FC as much as i could, to the point where i had all kinds of gadgets and attatchments messing up the car.. Now i have it all in one :P

What actually stops you with the PFC? What are the map/tuning limitations experienced?

I'm not talking extra features that you dont need... just the sheer ECU, mapping, and then tuning on a dyno... drive on the street. Thats it.

What makes the PFC unsuitable for big power (400rwkw+ say)???

Putting things like autronic, motec and so on add nothing, they are ECU's that take weeks to properly tune from scratch to be able to have perfect driveability

Putting things like autronic, motec and so on add nothing, they are ECU's that take weeks to properly tune from scratch to be able to have perfect driveability

The fact that you asked this question is the most concerning matter. I guess i cannot judge.. I was there once. Now i know better.

For me to try and explain to you is a waste of time, (as it was for my mates who tried to explain it for me..) you will work it out in your own time :P

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • To clarify what I posted above, I though you both had a situation where it cancelled sooner one way than the other.....if it is reasonably even where it cancels in either direction that is probably normal (consider gentle movements like lane changes, you don't want it to need half a turn of lock to turn the indicators off)
    • Son, in this country, that is a piece of Gyprock. f**king drywall. FFS! I also like the autocorrect of trailer to tablet. I was reading it and thing, "what the hell drugs is he on?" Then the photo made it clear enough.
    • SO whats the deal with this issue? I've read a heap of posts from the infinity owners in the US having full engine swaps done under warranty. Most claims are done on earlier cars than 2019 but I'm sure I've come across claims of 2020 models also having this issue. I like the 400r and Q50Red/S but can't fathom dumping close to 50k on a car with terminal issues!!! 
    • The above video is working normally. That is, that's how the right hand indicator should cancel when rotating the wheel left.
    • I noticed that I could see creatures on the moon when I turned my new headlights on. I thought I should check the alignment. It's pretty rudimentary but I just grabbed some dry wall and put it against my tablet and made sure the beam was below the height on the headlights. Ie the beam is at 600mm on my car, I just made it lower than that 7.5m away.  Not the best but it'll do until I can do it properly at the local shops.   
×
×
  • Create New...