R32 Gtr Gauge Cluster Into Gtst?

[TheProDaniel]

Hey guys just wondering if it's a straight forward swap? The reason for is because it is white with the red needles and that would match the gauges I'm planing on getting.

[DanShirts]

Hey guys just wondering if it's a straight forward swap? The reason for is because it is white with the red needles and that would match the gauges I'm planing on getting.

I'm looking into this too. The circuitry on the back is pretty simple. Here is what I have found so far:

Left side pins:

Oil/Boost Earth

Oil Temp Signal

Boost Signal +

Boost Signal -

Right side pins:

Illumination Earth

Battery Earth

Illumination 12V

Battery 12V

The voltage and illumination is no problem, just tap into the radio loom. But you will need to find GTR sensors for the oil temp and boost.

[Nismoh]

I'm looking into this too. The circuitry on the back is pretty simple. Here is what I have found so far:

Left side pins:

Oil/Boost Earth

Oil Temp Signal

Boost Signal +

Boost Signal -

Right side pins:

Illumination Earth

Battery Earth

Illumination 12V

Battery 12V

The voltage and illumination is no problem, just tap into the radio loom. But you will need to find GTR sensors for the oil temp and boost.

would be an awesome swap... is there any mods needed to do to the dash to fit?

[joeyjoejoejuniorshabadoo]

in the 33 you have a bit of fabricating to do due to the top right corner not being a right angle... not 100% bout 32's tho

[DanShirts]

I know it fits my Cef. I just don't have a boost sensor.

[heller44]

There are differences in the pin configuration for r32 series cars for certain years, try it and see.. I have a late r32 gtr dash in an early r32 gts4. Lots of electrical crap was wrong but it is easy to shift the wiring around in the connector.

[TheProDaniel]

There are differences in the pin configuration for r32 series cars for certain years, try it and see.. I have a late r32 gtr dash in an early r32 gts4. Lots of electrical crap was wrong but it is easy to shift the wiring around in the connector.

Cheers guys, have to get hold of a cheap cluster and see what I can come up with.