Jump to content
SAU Community

Recommended Posts

if you don't have brembo they may still clear your caliper, but... being your front (if coupe) has originally 8 or 8.5 width stock rims and +30 stock offset, using +40 offset will decrease your front track width and may upset the balance/stability. if you have V35 sedan they may be ok as the rim width is wider than stock.

For stability you would always want to increase the track width, not decrease it... or get a slightly wider tyre as the rear 9.5" may also make up for it, but I've seen cars with rims that sits deep in the wheel well and they look kinda funny IMHO. Again from stock +30 to +40 is only 1cm inwards but... you never know with cars, if 5 x 12mm bolts can withstand 700kg on each wheel corner, that makes you think that if you play around with 1 or 2cm difference how much stability can be affected?

I'd say no.

Stick with +30 or less.

Agree.

I have similar spec, 8.5 wide front +25 and 9.5 rear +30.

Front: post-a199199-DSCN6874-Small-.JPG

Rear: post-a199200-DSCN6880-Small-.JPG

They look good IMHO almost flush with the guard.

I'd think with +22 all around and the those width you said, they'll be right on the edge of front guard, but may look sticking out a tiny bit at the back or just flush with the guard.

Keep the rear tyres around 265 or 275 width which are good fit for 9.5" anyhow, and you may get away without rolling guards. But if they look like sticking out the rear guard too your preference, you can have the rear guard pumped a bit, especially if yours is lowered.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Seeing as it's an 04 model, I would be hitting up wreckers first.
    • No not yet.  Hopefully this weekend if I can pluck up the confidence!  I had to sit in the car at one point yesterday to unbolt the rear struts.  As mentioned in an earlier post when I was putting it together there is still a bit of rotation possible so when I sat in the car, it rotated a little bit.  I near shit myself thinking the whole thing was coming down!  I do 99% of my own shit in the shed but I think I might call on some assistance the first time I spin it!
    • Strong first post. On a Skyline-centric forum. Have you considered actually going out into the world, visiting the actual dealership, and asking the parts guy over the counter? Or at least just call them up on the phone?
    • Should shit that in as for the driver ability probably not
    • Trying to find the plastic under cover for an 04' Forester X. The main under cover that covers most of the front of the vehicle under the engine. This has turned out to be a crazy experience. Normally I can find parts for vehicles, if I have the correct info, no problem. But not this! The Forester is a non-turbo btw. In a Forester parts catalog, for model years 03'-06', it shows part# 56410SA070 as being the correct part. So I go to the local Subaru dealership's website to order it. I type in the part#, hit search and there it is, the under cover. "DOES THIS PART FIT YOUR VEHICLE?" I type in my VIN# and sure enough, "This Part Does Not Fit Your Vehicle. See Similar Parts For Your Vehicle." I click on that and part# 56410SA000 comes up. Looks absolutely nothing like the previous part. Not even close. So I go to a different Subaru dealer website and put in that 2nd part# (56410SA000) and "This Part Has Been Replaced By" 56410SA070, which is the first part I looked up. I thought OK, makes sense. They replaced the strange looking part, with the one I looked up first, so I add it to the cart. "Does This Part Fit Your Vehicle?" I type in my VIN#, and sure enough, "This Part Does Not Fit Your Vehicle." I've basically been doing this with various parts suppliers and dealerships, for the past 4 hours! Does anyone know what the hell is going on?? Thanks in advance!   
×
×
  • Create New...