Jump to content
SAU Community

Recommended Posts

hey guys im pretty new to the forums here on sau after owning all sr's i bought myself a gtr r34 v spec.

i after some advice on what exhaust everyone is running and your thoughts... i want to run something loud and with maximum flow but also somethign that looks really good. will be buying one in the next 4 months so thought i better start looking.

so how much

specs

pics

etc would be great!

cheers in advance fellas :)

Edited by sly14
Link to comment
https://www.sau.com.au/forums/topic/253926-r34-gtr-exhausts/
Share on other sites

hey guys im pretty new to the forums here on sau after owning all sr's i bought myself a gtr r34 v spec.

i after some advice on what exhaust everyone is running and your thoughts... i want to run something loud and with maximum flow but also somethign that looks really good. will be buying one in the next 4 months so thought i better start looking.

so how much

specs

pics

etc would be great!

cheers in advance fellas :)

If money is no object then look at the Midori Seibi system.

76mm bellmouth dumps, as good as the tomei ones.

matching split downpipe, merging to 90mm.

high flow cat, 90mm

then full titanium catback system, 90mm to big tip.

I think this would rock because it isn't heavy (titanium) is 90mm the whole way, and

it would all bolt up perfectly.

Unfortunately the all-in cost of this is scary. I think it comes in at $8k with the

crushed aussie dollar!

If you can find a turbo back solution that doesn't have any step changes in diameter, fits with

one of the Trust PE Ti-R cat-backs, isn't ridiculously loud and doesn't use a bung (which

wouldn't pass the authorities) then lemme know!

nah 8 k is wayyy to much im looking into the kakimoto exhaust atm as they seem to be decently priced...

also like the super dragger and blitz but i pretty much just want to see more pics of peoples and how they sit etc before i go out and buy one.

nah 8 k is wayyy to much im looking into the kakimoto exhaust atm as they seem to be decently priced...

also like the super dragger and blitz but i pretty much just want to see more pics of peoples and how they sit etc before i go out and buy one.

well Fujitsubi is one of the most common exhausts for GT-Rs in japan...

from memory they are decently priced...

it depends, someone should write an article on comparison with exhausts..(unless they have already)

because an exhaust shop can custom make whatever exhaust and whatever angle you like.....

and these custom ones are like half the price of HKS for example...

that might be something to look into....

on the previous supra i had, i went to a custom exhaust shop......got a 3" pipe with 4" x6" stainless steel muffler & got them to give it a little kick in an angle of the way the muffler stuck out.

it was around 1000$ or so....

but these things may work just as good as Blitz or HKS..... but like i said...i dont think anyone has compared with a dyno..

that sounds tuff too, im after more of the shape as the blitz one i have posted up i have found out its a blitz nur RR now just to find a few more pics and prices and see how i go i guess... im not going to make my mind up straight away so still on the hunt

i used to have a veilside teardrop titanium lightest on the market at 4kg 3 1/2 inch one peice straight pipe no resonator etc full titanium nice exhaust but loud 109db @5100rpm which is the rpm test limit for db testing for a 33, 34 GTR, i now have a kakamoto regu 06&R nice and quite but more restrictive and more then twice the weight ,they are a good well made solid exhaust though

post-277-1232842138_thumb.jpg post-277-1232842271_thumb.jpgpost-277-1232842735_thumb.jpg

post-277-1232842896_thumb.jpg

some of the veilside exhaust

post-277-1232843104_thumb.jpgpost-277-1232843192_thumb.jpg

post-277-1232843286_thumb.jpg

I gota BLITZ Nur Spec but for a R32 GTR, its atleast 3" if not 3.5". Great for exhaust flow but loud.

gtr13 that Veilside Tear Drop Exhaust is awesome!

Also my friend Tim GTR on SAU has a cat back titanium Ganador Exhaust system on his R34 GTR Nur. Again, its atleast a 3" if not 3.5".

Has a nice low rumble and opens up when the accelerator is down. Good for a few flames too. LOL!

post-46584-1232863935_thumb.jpg post-46584-1232864046_thumb.jpg

I gota BLITZ Nur Spec but for a R32 GTR, its atleast 3" if not 3.5". Great for exhaust flow but loud.

gtr13 that Veilside Tear Drop Exhaust is awesome!

Also my friend Tim GTR on SAU has a titanium Ganador Exhaust system on his R34 GTR Nur. Again, its atleast a 3" if not 3.5".

Has a nice low rumble and opens up when the accelerator is down. Good for a few flames too. LOL!

post-46584-1232863935_thumb.jpg post-46584-1232864046_thumb.jpg

The ganador is the one with only the end muffler, yes? is it really not TOO loud? They come up relatively

cheaply (for ti) on yahoo, i think they are discontinued..

Moneypit - Im sure its a cat back not just a muffler... if thats what your refering to..? I don't have a pic of it from under the car, maybe next time when I see Tim I can take a pic of it.

Well as opposed to my BLITZ Nur Spec which just roars on idle LOL! I can say the Ganador is not too loud.

Moneypit - Im sure its a cat back not just a muffler... if thats what your refering to..? I don't have a pic of it from under the car, next time when I see Tim.

Well as opposed to my BLITZ Nur Spec which just roars on idle LOL! I can say the Ganador is not too loud.

I mean is it this one?

http://page3.auctions.yahoo.co.jp/jp/auction/c191702730

http://page3.auctions.yahoo.co.jp/jp/auction/c191702730

Ah yeah LOL!

Well thats looks pretty much like it, a full cat back.

From what I can tell in Japanese = "新品 ガナドール BNR34 スカイライン GT-R RB26DETT 99/1~02/8"

http://page3.auctions.yahoo.co.jp/jp/auction/c191702730

Ah yeah LOL!

Well thats looks pretty much like it, a full cat back.

From what I can tell in Japanese = "新品 ガナドール BNR34 スカイライン GT-R RB26DETT 99/1~02/8"

yeah. Interestingly it is 80mm before the mid "muffler" -- and then opens up to 90mm to the rear muffler..

I suppose because of the difficulty obtaining 90mm dumps and 90mm cats!

also weighs 6kg vs stock 18kg

Edited by moneypit

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • I'm seeing torque specs all over the place for the OUTER tie rod, but none for the INNER tie rod, where it connects to the steering rack. Even in videos, people are just tightening em up as much as they can with a wrench and that's it. Anything tightened down without torque makes me nervous. Anyone know what the spec is for it?
    • Hope you had a great time here in our tiny country.   The JDM scene we have here is quite small, it's mostly BMW, Volkswagen with burble tunes haha. But the few JDM cars we do have in the scene are pretty nice. Some of my friends drive cool s14's too. Both built engines, red one makes abt 500, blue one abt 400 i think?
    • Ye good idea , would have never thought of something like that. Might aswell do it to every pulley and the balancer while I’m there 
    • Use an LS1 or similar, via kit like Frenchy's. But.... It's probably not the alternator. It sounds like belt squeal, which would be because the pulleys are glazed. Rub every groove on the pulleys with 120 grit paper. Report back. Oh, and new belts afterwards too. The old new ones will be shitted up already.
    • Hello all I have 2 r34 sedans , one turbo one na, only recently aquired the na 34.  Man what is with these things.... My turbo 34 started sounding like a super charger, it was screaming at anything above 4000rpm , I took the alternator apart and replaced the front bearing which is the only one I think you can access and it did not fix the issue so presumably the bearing in the rear of the alternator is gone. ( diagnosed it was the alternator by taking off the aux belts one by one to figure out which pulley or bearing it was )  My friend gave me one he had lying around, Installed it , it did not squeal for maybe 500kms and now its started to squeal again briefly on startup  Recently got an na r34 and I replaced the timing belt, water pump + all the auxillirary belts. Runs amazing but it suddenly developed the same squeaking problem but significantly worse, Ive had my neighbour come down screaming at me because it was waking her up everytime I moved the car. It takes a good 2 minutes before it quietens down.  Im yet to diagnose where its coming from but im fairly sure its coming from the alternator aswell. My question isnt about how to fix it but rather where can you get a new alternator for an rb25 neo??? Ive searched everywhere but I havent been able to find a direct fit oem type replacement thats not genuine. All the automotive stores sell an oex one - BXA035 - which I picked up for cheap through a friend with staff discount , got it home only to find the connector is completelty different.... As far as im aware bxa035 is for rb20/30's and after a bit of figuring out the bxa035 has an ev14 type connector, which is tiny compared to the rb25 connector. I actually had an ev14 connector lying around which I was considering just replacing the bigger plug with to get the alternator working but the bxa035 is rated for 70amp vs the rb25 alternators are 90amp ( or so ive been told ? ) That paired along with the fact im about to install an amp + sub in the back and I have the stock sized small battery Im not sure itll do the job unless anyone has another opinion?  I know and have seen all the websites selling the ls1 alternator conversion kit but I am not going down that route, nor do I have the money to. Hopefully I can figure out how to get 2 brand new alternators for both cars. I would buy second hand which there seems to be many of but considering how common this seems to be im sure If I installed a second hand one it would start squealing in no time  Or even better if anyone knows how to fix the issue directly with the alternator itself... Any input appreciated Thank you     Link for bxa035 connector picture
×
×
  • Create New...