Jump to content
SAU Community

Recommended Posts

Hey guys&girls,

just blew my stock turbo in my 33 its a 96 series 2.

I just put a r32 actuator in and it read 1 bar within 5 minutes she made a pop/whistle noise!!!lol

Now i was just wondering what i should do,get it fixed or buy a second hand one?

I just want one that will cop 10pounds all day everyday without issues.

Any ideas would be great,cheers

Link to comment
https://www.sau.com.au/forums/topic/253966-just-blew-my-turbo/
Share on other sites

that would be nice but not too good for the coin side of things, all i want it 10 pounds and im happy,maybe even 12 for as less as possible...........so im thinking another stocker and a decent boost controller will do the job????

what does 10 psi mean? bragging rights?

Run whats safe for the turbo, its not about a number.

Its either replace the stock one, with another stock one for less than 1k.

Or do an upgrade, decently, and spend about 2.5k

Just luck of the draw. Mine takes 15 psi everyday and i drive it hard pretty often.

My advice would be to get another second hand one. Can pick them up for 300 pretty easily. And thats all it will cost you if you are prepared to install it yourself. If not then the cost will probably double to 600..

as said luck of the draw, in my old 180 rb20det i punished it, wouldnt do it knowing what i know now, but it had a ca18det cooler, (thinner than std r32) and was running 1 bar for just over the year that i had it and i thrashed that thing every day, then sold it to a mate and it kept on living until he wrote it off

Im well aware of whats safe, whats not.

Just saying to ensure you run whats safe, and forget about the number (safe or unsafe).

Im not negative, just making a comment to the above, maybe you take that negatively... considering your record on the forum that comes as no surprise.

If you're lucky enough to find one get a R34 neo turbo, comes with the VG30 sized larger rear housing but a nylon compressor wheel meant I didn't notice any lag compared to my S1. I made 4kw more at 10psi compared to 12psi on the S1 R33 turbo. They go for $400-450.

if it were me (eventually i will be in your situation with my series 2) I would park the car for a few months, use public transport if you can or find other ways to get around untill you can afford to put a new upgraded turbo in. I don't mean go all out and put a massive high mounted lag macker in it, put if you get another second hand (suposable good nick) turbo, you run the risk of it stuffing up on you again, you have no idea what life a second hand stock turbo has gone through. they are old, they can fail even if they have minimal play and look and feel fresh. Just buy another decent turbo (brand new), or take your turbo and get it highflowed for about $800 ive seen. Highflows arn't the answer for running massive power, but its more than enough than what you need it for, fairly cheap compared to a new turbo (highflow is basically a newer better turbo of the original and run higher boost).

me personally if i had the money i'd go a new better turbo.

but its your decision

if it were me (eventually i will be in your situation with my series 2) I would park the car for a few months, use public transport if you can or find other ways to get around untill you can afford to put a new upgraded turbo in. I don't mean go all out and put a massive high mounted lag macker in it, put if you get another second hand (suposable good nick) turbo, you run the risk of it stuffing up on you again, you have no idea what life a second hand stock turbo has gone through. they are old, they can fail even if they have minimal play and look and feel fresh. Just buy another decent turbo (brand new), or take your turbo and get it highflowed for about $800 ive seen. Highflows arn't the answer for running massive power, but its more than enough than what you need it for, fairly cheap compared to a new turbo (highflow is basically a newer better turbo of the original and run higher boost).

me personally if i had the money i'd go a new better turbo.

but its your decision

if it's going to take a few months to save up for a upgraded turbo, then it's probably not such a good idea.

the reason for upgrading usually would be more power, which in turn can cause more things to break...

get another good condition stocker on there, run 10psi, and you'll be fine. ;)

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Starting with issues 1 - 5, we have already run into a problem...!  Issue #4 contained 2x front brake calipers, instead of 1 caliper and 1x steering knuckle. Will have to call DeAgostini on Monday to sort it out. Anyway here's some photos.  Issue #1 is the front bumper, headlights and number plate. Issue #2 is the front wheel (with "We produced with spartan air." text on the centre cap!) and tyre, the front lip spoiler and cylinder head cover with ignition coils under the centre cover... which will never be seen again. Issue #3 is the bonnet and cylinder head. Issue #4 is the front strut, brake disc (with laser etched metal discs) and brake caliper. I stopped here because of the issue with the missing steering knuckle.  Next update will be #5 - #10 in a few weeks.
    • DeAgostini is one of a few companies that release quite large (the largest commonly available size actually) 1/8 scale models in a series of weekly issues over 100 - 110 instalments.  They release different models for different markets and DeAgostini Japan have release the BNR32 Skyline GT-R Nismo last month. I've made two of these 1/8 scale sized cars (one an R35 GT-R from 2012 - 2014, the other I'm just about halfway through, a BNR34 Skyline GT-R from the 2Fast 2Furious movie) so when this R32 was announced there was no way I could ignore it as it's my favourite out of all Nissans.  Each issue costs around $20 so it costs about $2.2K when completed. I suppose it is very expensive for what it is, but the quality and details are really very good, and there are many "gimmicks" like fully functioning exterior and interior lights operated with a remote control, working steering, all doors/bonnet/boot/fuel lid open and close, the side mirrors fold in and it even has a speaker for the engine revving sounds when you turn the lights on.  Each issue comes with a magazine that tells the story of the BNR32 Skyline GT-R Nismo from the first design stages of the BNR32 to Group A homologation and the various racing version that were run in the Japanese Group A and JGTC, and Australian Group A.  So I plan to update the build in this thread 5 issues at a time.  https://deagostini.jp/r32/?srsltid=AfmBOooKjxDc4EUK2rmXqMBPgyHfFJ24s4oEPJBNpnF-lFlsRoW0PE6P
    • As per title.. has anyone used so far? Keen to hear results, comparisons. In the market for a new mani for my new turbo. Any issues cracking?
    • Re read everything that has been written about this in this thread.. Let us know if you're still confused.
    • This would be a new pump with new gears. I'm just unclear on whether it's a good idea to run more oil pump flow if you don't actually need said flow. Oil level is set a minute or so after shutting off a warm engine so wouldn't the high RPM oil level in the sump end up lower all things equal? Plan is OEM clearances, main concern in my mind is whether the OEM pump can keep up with the flow requirements of any additional oil coolers.
×
×
  • Create New...