Jump to content
SAU Community

Recommended Posts

--------------------------------------------------------------------------------

Alpine MRV540 Vs JL F300-4 AMPS

hi

lookin at getin eiter of these two amp but not sure which one to go the JL is sligtly more xpencive by $150 or so ... just wanted to no what ppl have had expreinces with any of these reputable amps.. i have been told to get the Jl of V12 mainly because its a cleaner sound .. althought the V12 is nice post your thoughts

i plan it to drive my

JL 12"

and 6.5 splits (front)

and mayb my rear fill to crank will they both handle this ?

Link to comment
https://www.sau.com.au/forums/topic/25397-alpine-mrv540-vs-jl-f300-4-amps/
Share on other sites

mrv-F540 ?

firstly what sort of 12inch sub? the alpine is only 4x50 rms at 4ohms , after u put in 50rms into ur splits each, u'll only have 100rms for sub (assuming its 4ohms)

SQ of both these amps are roughly the same...i wouldnt worry about htat too much

the JL's are 4x75RMS, and i'd go for that

2x75RMS to splits will sound very nice

i wouldnt put rears on them aswell..

Originally posted by Fhrx

No competition in my opinion. The JL Audio 300.4 wins. :(

damn straight !

theres a 100 price diff betwen the jl and alpine why not go the jl i said

it was that 300/4 or the e6450 jl to choose from

i still stuck with the 300/4 let u no how it all works out after it arives

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Hey, guys, I’m hoping I can find answer here. I have already done some searching and asking around but still nothing.    I fitted an IC7 dash in my R32 GTR, and I got everything displaying on the dash except my high beams. I get input voltage and the high beams displaying in the dash when I pull the lever, but not when I fully engage the high beams. I spliced into the Red/Blue Beam+ wire in the black center connector from the cluster, but there is also a black Beam wire I think I need to use as well. The high beams still work. It’s just a matter of getting it to display on the dash.    Has anyone fully wired in their IC7 properly ? I would appreciate any guidance on this.    IMG_8835.mov    
    • I buy my wheel cleaner in 4 litre bottles now. Euro brakes are brutal
    • Sounds like it may all just be some baseless outrage stoked by the carexplore guy? As in the linked social media outrage on facebook just goes back to carexplore as a source again. Further shown by the council response that nothing actually has changed: "The Private Land Use Permit has been part of the Casey Community Local Law for a number of years. It's important to clarify that this permit is not new, and no changes have been made to the permit or the Local Law in relation to the permit." The full council response in Prank's link sounds reasonable to me. Saying that as someone who neither lives there nor has a front yard to call their own  
    • Clutch hydraulics are also all good, looks like a brand new slave cylinder and everything bled up well. No idea what the actual clutch is, and I don't intend to pull the box off on the floor to find out, so unless we have trouble on the dyno or at shakedown that will remain a mystery for the new owner
    • Front brakes are G4 8 pot calipers over 330mm discs with braided lines. Everything looks good, pretty sure these are off my old 350. Pads are brand new and judging from gold colour are Winmax which is what I also run on my race car, Neil and I both sourced brake stuff from Matty at Racebrakes Sydney who really knows his stuff Everything has bled up nicely with all new Motul RBF600 fluid, there were 2 loose hard line connections and the calipers were new on the car so I ended up doing it 3 times but it is perfect now
×
×
  • Create New...