Jump to content
SAU Community

Recommended Posts

Well i have spent ages trying to work out why my gear box keeps spilling fluid out through the breather in the gear box. No seals are leaking, its just coming out of the breather. It didn't happen with the previous fluid that was in there only once i put the shock proof stuff in.

Once i changed it, i poured almost the full bottle in, 3.6L roughly. Since then it just has been leaking, so i ran an rubber hose to the top of the engine bay, so most of the time this is enough to stop it. It hasn't and now i'm considering changing to another type of gear box fluid as it sh*ts me to tears.

anyone had simular problems? cause its meant to be good stuff.

Anyone got/had simular problems?

Thanks in advance

Link to comment
https://www.sau.com.au/forums/topic/254077-redline-shock-proof-problem/
Share on other sites

did you fill it correctly through the filler hole and not through the shifter and guess the amount of fluid?

if it is filled correctly, i.e. correct level, running out of filler hole with the car level, then change to another fluid.

redline is over rated in my books anyway.

did you fill it correctly through the filler hole and not through the shifter and guess the amount of fluid?

if it is filled correctly, i.e. correct level, running out of filler hole with the car level, then change to another fluid.

redline is over rated in my books anyway.

Nar mate it was filled via the shifter from the cabin, but i unscrewed the bolt on the side of the gear box (filler?) and the fluid level seems ok.

I have always run smurf blood in my R33 with no issues.

I would suggest that there is too much oil in the box. Park the car on a level site and remove the filler plug on the side of the box to drain out any excess oil.

Is this a GTR or GTS-T?

The shifter goes into the transfer case on a GTR, so if you filled the transfer case youve mixed ATF and synthetic, and are running your gearbox dry.

And... I think the GTS-T's are supposed to use Redline ultra-lite weight, not the light weight. Its more like an ATF oil that is used in the R34 getrags as wel.

Is this a GTR or GTS-T?

The shifter goes into the transfer case on a GTR, so if you filled the transfer case youve mixed ATF and synthetic, and are running your gearbox dry.

And... I think the GTS-T's are supposed to use Redline ultra-lite weight, not the light weight. Its more like an ATF oil that is used in the R34 getrags as wel.

Its just a single turbo! and i done my research and everyone said its fine, plus mechanics, redline and search engine

But thanks anyways!!!

I just realised that i'm gonna try a rachet so i can adjust the angle and on the way home pick up a water pipe for extra leverage :blush:

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Yes, I know🙄 but the sequential is not in my budget... don't want to reduce power neither, so looks like I'm stuck in the rabbit hole🤣
    • You’ll be very upset when you bust that too not to mention the gearing totally sucks. Don’t do it.
    • Is the panel filter one that is oiled? Have you ever cleaned or touched the AFM?
    • So.... the K&N air box thingo was too big, ended up gifting it to a mate, well, by gifting it he actually supplied food and beer at the pub,  which was nice, as it will not sit on a shelf in the garage for the next 10 years I did trim up some of the existing stuff to neaten it all up and gave it some wrinkle paint, unfortunately it currently has a used and abused mish mash of different types of hose clamps, 4 big fat T bolt type (shit), and a few normal clamps of vairing sizes and brands, but..... only until the 6 constant tension black worm clamps that I ordered from EFI solutions turn up next week Currently the current hose clamps are triggering me hard, LOL Is this the final version, probably not, I really want just 2 silicone pieces, a straight bit of silicone from the filter to the MAF is easy and will happen as soon as I head into Just Jap tomorrow, the problematic part is a 30° silicone bend from the MAF to the TB that I can connect the engine breather from the head, I found that there are bulk head fittings for boat bilge pumps that should work, but until I can get a 30° silicone bend the alloy pipe, and the 11ty thousand hose clamps, are there for the foreseeable future 4 hose clamps are golden, 6 are grudgingly acceptable, the 8 currently holding it all together is just taking the piss    I've also ordered 60 more retaining wall blocks for the front yard, I mis-gonculated the height that was required to get above the base of the Photinia's (red robin's) that are the hedge behind the front fence, currently it is 2 blocks high, and about 1/2 a block short, so going 3 blocks high will be above the base of the red robin's, and allow some room for mulch
×
×
  • Create New...