Jump to content
SAU Community

Group Buy : Motul 300v 10w40 (victoria Only)


Recommended Posts

MOTUL 300V 10w40 $89 for 4 L rrp $109 i will need about 15 people for this to go ahead no money up front will be needed

just leave your name if your 100% interested at the end of it i will get stock sent to

STATUS TUNING

63 Rodeo Drive

South Dandenong

Phone: (03) 9792 3333

Fax: (03) 9792 5555

E-Mail: [email protected]

OPEN 9.30am - 6.30pm Monday to Friday

(victoria) and can be paided and picked up from there

i will leave this up for 1 month from the 27/01/09 - 27/02/09

stock is coming from link international in Queensland

cheers

300V CHRONO

10W40

New 300V series is racing lubricant for racing cars.

MOTUL has developed “Double Ester Technology” for new 300V series, superior to complex ester that recognized the best base oil for engine oil up to now. Double Ester Technology, made by carefully balancing the ratio of complex ester and the newly developed macromolecular high polymer ester, enable base oil more wide-ranged, and delivers high output performance and superior reliability.

Also by carefully selecting the right polymer, “0% shear loss*” can be achieved.

*Diesel Injector method (CEC L-14-A-93), a standardized testing procedure for a lubricant’s shearing force.

Can be mixed with another viscosity of same series to achieve most suitable viscosity for the engine. (except for 5W-40)

* All-round use, designed for handling stable oil pressure preservation and sharp response.

* Compatible with a wide selection of engines — naturally aspirated, high torque turbo and cars that produce average to high levels of exhaust fumes.

SPECIFICATIONS

Product 300V CHRONO

Feature 100% Synthetic, Double Ester Technology, 0% Shear loss, can mix, for cars only.

SAE/DOT Standard 10W40

Specification Exceeds all existing standards

Maker's Approval —

Compatibility For a wide selection of engines — naturally aspirated, high torque turbo and cars that produce average to high levels of exhaust fumes

post-6642-1232982378_thumb.jpg

Why is it that motul dont make any of the 300V in 5L's? I asked the link rep last time he was up in our store and he didn't really know. Is there a reason for it? Always wondered about this.

  • 3 weeks later...
  • 2 weeks later...
Guest
This topic is now closed to further replies.


  • Similar Content

  • Latest Posts

    • C34 Stagea RS4S Standard RB25DET Neo with ARP Headstuds and MLSR Gasket. Bosch 1000cc injectors Walbro 460 Standard neo inlet plenum w/rb25 s2 throttle body 6 Boost Low Mount Manifold Turbosmart Gen V 45mm wastegate (recirculated) Pulsar g30-770 (0.72 rear housing) 3.5"intake pipe to clear mounts, 3.5" dump to 3" exhaust Link G4X Ecu 380 hp on 98 octane, 478 HP on e85 (mainline hub dyno) Video of Earlier Run VID_300701109_043404_458.mp4 Final Dyno Sheet:    
    • Meh. Every single gear in my gearbox will crunch. I've been treating it nicely for >12 years now.
    • How fast are you doing the downshift? 4th gear was revised multiple times until 1998 to fix this issue. Synchro clips can fall out, synchros can wear. Most likely you're looking at a new transmission unfortunately. If you need to limp it until then double clutch downshifts into 4th.
    • Sorry I was being harsh there, but am I wrong? You can buy a M340i easily, and there's loads available second hand. A lot more workshops modifying them as well. How about getting parts for them? Don't get me wrong, I'd love a 400R, even a 4cyl (I looked at a few V36s before buying my shitbox BMW). Sadly Infiniti died in Aus and we're stuck with importing them as niche vehicles. Supply and demand
    • Probably straight swap for an R32 GT-R? lol
×
×
  • Create New...