Jump to content
SAU Community

Vin Request 94 R32 Gtr

94R32GTR
 Share

Recommended Posts

94R32GTR Newbie

94R32GTR

Posted
Posted

Hi Guys im new and ive been reading through the threads but i cant figure out if my car is a V spec from the info on the site.

Here are the details.

VIN:- 6U9000BNR32309534

HCR32-259470

MODEL:- RCR32GASLAA

Some other codes.

KH2 G

rb20det 1998

RE4R01A RC43

5

Its got the big brembo brakes and finned diff cover but anyone can put that stuff on , so any help would be appreciated.

Link to comment
https://www.sau.com.au/forums/topic/254273-vin-request-94-r32-gtr/
Share on other sites
kakimoto33 Rising Star

kakimoto33

Posted
Posted

VIN:- 6U9000BNR32309534

This is an R32 GTR chassis number as recorded on the Australian system (original Japanese VIN with 6U9 and some 0's in front to make it 17 digits) and it belongs to a crystal white coloured May 1994 built GTR so it could well be a V-Spec model although it appears not to be from what I can see so far.

HCR32-259470

This is the Japanese VIN number from a November 1991 model GTS-T (a gunmetal grey coloured 4 door sedan with automatic transmission to be precise) ... this build date means that it's not allowed for import to Australia (mid-1991 to mid-1992 are not allowed for import) so there is a chance that it was imported illegally or was found to be a non-importable model once it arrived, and then may have been re-identified with a wrecked GTR's compliance information.

rb20det 1998

This is an R32 GTS-T engine code and cubic capacity ... does this car actually have an RB20DET engine (2000cc single turbo) or an RB26DETT (2600cc twin turbo) as it should if it were a GTR?

I would strongly advise you to look into this further before doing anything ... something is seriously wrong with the details you have given here. Check what VIN number is listed on your invoice and also what is on the import approval and/or compliance paperwork that you should have recieved with the car. I can check more details for you if required and give some advice on how to deal with it if necessary so please feel free to email me with any more details at [email protected]

kakimoto33 Rising Star

kakimoto33

Posted
Posted

They should not be on the same car ... I assume the 6U9000BNR32309534 is on a seperate VIN plate fitted for Australian compliance (and probably later swapped by someone dodgy to another car) and the HCR32-259470 number is on the factory build plate along with the other details given in the first post. If the BNR32 number and HCR32 number are both on the factory build plate then there is even more weird things going on here.

Quick questions:

- how many doors does this car have & what colour is it?

- what is the VIN number stamped into the firewall by the factory?

94R32GTR Newbie

94R32GTR

Posted
  • Author
Posted

The 6u9000 number is on a tag on the strut tower which matches the number stamped on the firewall.

I have no doubt its a GTR as i used to have a 92 GTR so it has all the right bits.

pumped rear guards , alloy bonnet etc. its white , and has a N1 or Vspec bodykit , front bar is plastic? and it does have 2 doors.

I will double check which plate has what numbers , i agree hcr32 is a gtst number so i will have to look into that and get back to you, i do know that the hcr32 number and the RCR32 model number are on the same plate and its the one with the japanese writing on it.

I will get back to you tomorrow , but thanks everyone for your help.

willL Experienced

willL

Posted
Posted
Quick questions:

- how many doors does this car have & what colour is it?

- what is the VIN number stamped into the firewall by the factory?

according to the code he has provided its Gunmetal Grey

somthin seems very suss here..

kakimoto33 Rising Star

kakimoto33

Posted
Posted
The 6u9000 number is on a tag on the strut tower which matches the number stamped on the firewall.

I have no doubt its a GTR as i used to have a 92 GTR so it has all the right bits.

pumped rear guards , alloy bonnet etc. its white , and has a N1 or Vspec bodykit , front bar is plastic? and it does have 2 doors.

I will double check which plate has what numbers , i agree hcr32 is a gtst number so i will have to look into that and get back to you, i do know that the hcr32 number and the RCR32 model number are on the same plate and its the one with the japanese writing on it.

I will get back to you tomorrow , but thanks everyone for your help.

With any luck it's just a case of it having the HCR32 body tags stuck on the BNR32 body, although I can't imagine why anyone would do that ... in any case just let us know if you need any more answers or help with anything there.

  • 1 month later...
SSHatch Collaborator

SSHatch

Posted
Posted
The 6u9000 number is on a tag on the strut tower which matches the number stamped on the firewall.

I have no doubt its a GTR as i used to have a 92 GTR so it has all the right bits.

pumped rear guards , alloy bonnet etc. its white , and has a N1 or Vspec bodykit , front bar is plastic? and it does have 2 doors.

I will double check which plate has what numbers , i agree hcr32 is a gtst number so i will have to look into that and get back to you, i do know that the hcr32 number and the RCR32 model number are on the same plate and its the one with the japanese writing on it.

I will get back to you tomorrow , but thanks everyone for your help.

All that is stuff that could quite easily been put on...

How about the important stuff like, I dunno...

Driveshafts connected to the front wheels, twin turbos, the RB26 engine...

You know, the sorta stuff you wouldnt normally expect to see in a GTSt thats been done up to look like a GTR

  • 2 months later...
Mike Rowe Enthusiast

Mike Rowe

Posted
Posted
VIN:- 6U9000BNR32309534

This is an R32 GTR chassis number as recorded on the Australian system (original Japanese VIN with 6U9 and some 0's in front to make it 17 digits) and it belongs to a crystal white coloured May 1994 built GTR so it could well be a V-Spec model although it appears not to be from what I can see so far.

ave recieved with the car. I can check more details for you if required and give some advice on how to deal with it if necessary so please feel free to email me with any more details at [email protected]

Can you help me identify whether a car I am looking at is indeed a GTR V Spec? The car is advertised as a White 1994 R32 V Spec and has a VIN No 6U9000BNR32314072. Is there a way of checking if in fact this is as it appears?

thanks Mike

Mike Rowe Enthusiast

Mike Rowe

Posted
Posted
Built October 1994, doesn't appear to be a V-Spec. That late in 1994 it would've been a V-Spec II anyway.

Hi Iron Chef thanks for your quick reply, I really appreciate it. This info is a great service

So from your check was it white, and can I be sure that it is not a V Spec?

regards

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing


  • Similar Content

  • Latest Posts

    • GTSBoy
      RB20 in need of modest love injection

      By GTSBoy · Posted

      As you're looking at using a Link ECU, then large injectors are not a problem. But there's not really any need to go 1000s on an RB20 unless you're planning >>600HP on E85, which would seem unlikely. There are other options for injectors. The Xspurt ones are available from a number of places and you can get them in the mid 600s and 725cc, which is probably a sensible place to be. These are all EV14 based. If you are not using the stock AFM (at all, which would be the case with a Link) then a large turbo intake pipe to suit the ATR turbos is not an obstacle, so you should use one instead of a highflow. Results will be better.
    • QB6SAGR
      RB20 in need of modest love injection

      By QB6SAGR · Posted

      Hey guys,  I'm after some advice and this here is the best place to get it imo. I was a member a looong time ago under another account, with a lost email address. Its nice to jump back on and see some of the same names still giving good advice.  I mothballed my car when i moved to perth in 2013, and after getting towed across the nullabor a few times it has officially done more km's on a trailer than under its own power. Now that i have started the process of tidying up and modifying it, i see the fruit available (and the fruiterers selling the produce) is different than back in the day. hence my questions, as i used to 'know' what to get and now, i'm not so sure. Engine wise the car (92 gtst) has a walbro 255, k+n, fmic, cam gears and and turbo back 3"exhaust. Wish list is a Hypergear high flow or ATR43G1, Link G4x and some newer injectors before a tune up. My goals are modest, only low 200's power wise. i know i could achieve this with less, but i've been swapping out old for new where i can. Every cooling hose has been replaced, along with mani gaskets, WP, thermostat and radiator, fuel pump and timing belt, tensioner and idler, and i rebuilt the steering rack. Regarding the injectors, the fruiterers all seem to sell what used to be considered quite large injectors. There are a lot of options for bosch 1000cc EV14's, and i would like to know if that is a suitable choice for my build. Is modern injector design good enough to run these at the low duty cycles that i likely would be? is there a downside to running a too large injector these days? or, would there be an upside to running a smaller injector at higher duty cycle? I can see that there are smaller injectors still available, but the ones i have seen specifically marketed for RB's are pretty large (see: https://golebysparts.au/collections/fuel-rail-injector-kits/products/nissan-rb20-fuel-rail-bosch-980cc-1150cc-injectors-turbosmart-fpr800-regulator-kit), and i dont know enough about them to say one not marketed for RB's would fit or not. I have searched the forums, and amongst all the posts on older tech, I did see gtsboy recommend EV14's, but no size was mentioned... again, i'm not clear on if the smaller size bosch injectors are also EV14's as they do look similar.  also, if someone can recommend a tuner familiar with RB's in the Geelong or West Melbourne area i'd appreciate it. Thanks in advance guys. Cheers, Rowdy  
    • Duncan
      R33 GTR lift points for hoist

      By Duncan · Posted

      FWIW the depth of the groove in the rubber pad is not super essential, the blocks are rubber and squish a bit. If you are worried an angle grinder will make a deeper groove quick smart
    • GTSBoy
      R33 GTR lift points for hoist

      By GTSBoy · Posted

      I mean, if you were to move the jacking points away from the original location, that is, away from the wheels and closer to the centreline of the car, then it will be more likely to overbalance and tip off the supports. Same as we talked about before. I was talking about moving for-aft. If the sill is bent outward or inward, then the car would obviously look unstraight from the outside. Hopefully that hasn't happened either. Again, you can do comparative measurements from the chassis rails to see if there is much deflection.
    • sunsetR33
      R33 GTR lift points for hoist

      By sunsetR33 · Posted

      Can you elaborate what you mean with your first sentence? I meant move as in the bulge kinda seemed like it got pulled "outward" meaning it got pulled down and to the side with the jacking rail itself, so the load bearing bulge now sits lower than usual and is not level with the sill on the other side of the jack point. Either that or the jacking rail just got pushed in a good bit.
×
×
  • Create New...