Jump to content
SAU Community

Recommended Posts

did u keep your -10's on your sperm whale paul or did u switch to -5's?

The sperm whale is still powered by RS's :spank: BUT I have bought a set of 5's to go on. Who can say no to 1000 RPM less to get to fullboost?

The sperm whale is still powered by RS's :spank: BUT I have bought a set of 5's to go on. Who can say no to 1000 RPM less to get to fullboost?

will you get full boost at the same revs as my rb30? should be similar right?

-5's on rb28

-10's on rb30

...will be interesting!

It shall be. With nice and small cams (maybe the mines 252's @ 10.05mm) and 'tickled' -5's. Should be alot better than the choo choo choO chOO cH00 CH00 CHOOF CHOOF CHOOF I have now!

did you ever try running that baffled twin turbo pipe i bought off you? im sure u said no at the time due to the hard pipe kit, you're more than welcome to try it though if u like :)

Your setup should come on boost sooner than mine paul as I had 280 degree cams with 10.8mm lift. My -5s I had on my rb26 was quite responsive, not like my -10s on rb30, but really not far off at all.

You will be happy if that is what you're chasing

did you ever try running that baffled twin turbo pipe i bought off you? im sure u said no at the time due to the hard pipe kit, you're more than welcome to try it though if u like :)

It came off my car that night!!!! Lol. It was on my car for years.

did you ever try running that baffled twin turbo pipe i bought off you? im sure u said no at the time due to the hard pipe kit, you're more than welcome to try it though if u like :)

It came off my car that night!!!! Lol. It was on my car for years.

  • 6 months later...

why are there so many dyno sheets on here with -5 setups and under 350kw? actually most are around 315kw. from my understanding 350 can be reached with -9's and quicker then the other. Unless there is some sort of other advantage im overlooking?

Would be interesting to see whats supporting mods people have used for a responsive -5 set up. I'm talking 3.5k and on song with 20psi. Even things like short gts4 gear ratios and lightend fly wheel matched with cam timing.

  • 1 year later...

Sorry to be bumping this back up but it has been a very good read. I'm still confused.. Is there a GT2860-9? Or are they listed as a GT2859R-9?? I have been in contact with GCG and they were telling me that the -7 turbos are bigger and have a bigger inlet and will make me more power then the -9.. But this thread has told me other wise.. Please help lol

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • If there's a next time, next exit after mine is Costco 😛
    • OK. But what about parts of the block that, when assembled, were twisted into a position that pushed into the void space, which, when disassembled, then released that force and opened back up, thus putting the grout into tension? Would effectively just pull the cast iron off the grout at the interface, leaving a tiny void and benefitting not much at all. Swings, and roundabouts. It's like putting something tiny into the fleshlight and finding out you needed a smaller one, to perhaps follow your area of expertise.
    • Nah. You buy a kit that has shorter tubes.
    • I didnt present too many conclusions because I wanted your opinions and feedback based on your own experiences. I don't know the exact material, but it is similar to concrete and therfor only has valuable strength in compression. The forces on the set material once the head is removed would mostly be in compression since the grout wants to retain its shape and the block wants to return to its relaxed state since it's still within the elastic region. The grout would theoretically make the block more rigid. The exact amount would take a better setup on my end. Thought experiment: Instead of aliens, twist your favorite fleshlite. Now fill it with grout and allow it to sit for a week. Now try to twist it again. Observe what you see. Now get your other one and blow into it. Observe what you see. Now put it into a can and fill the space between your fleshlite and the can. After it sets blow into it. Less movement in torsion and less expansion i hope.   
×
×
  • Create New...