Turbo's For Sale

[tx240]

Item1:

Garrett/Scania GT40 Turbo, Part # 452315-12

Description:

Bush bearing, Oil cooled, Internal gate, T4 split pulse inlet

Condition:

Near new, was run for a short time before being replaced by a larger unit. Has been completely cleaned, rebalanced and resealed.

Price:

$900 ono

Pics:

Item2:

Garrett VL Hiflow Turbo

Description:

Bush bearing, oil and watercooled, Internal gate (needs VL dump pipe), hiflowed .63 A/R turbine housing,-3 hiflow turbine wheel,410299-4 hiflow compressor wheel, Hiflow VL compressor cover. will give aprroximately 40% more HP to an already turbo'd RB30

Condition:

Reconditioned covers and centre housing, brand new wheels, back plate, bearings and seals

Price:

$650 ono

Pics:

Item3:

IHI RHB32 turbo

Description:

Bush bearing, oil cooled, internal gate. This unit suits early model turbo charades, but will work well on motors between 500cc and 1000cc

Condition:

Brand new, never used

Price:

$500 ono

Pics:

Item4:

Garrett T25g

Description:

Bush bearing, Oil and water cooled, .48 A/R internal gate turbine Housing, .48 A/R compressor cover, same as CA18DET unit but with a smaller exhaust housing.

Condition:

Reconditioned, new bearings and seals, rebalanced. Has not been used since rebuild.

Price:

$450 ono

Pics:

Item5:

Garrett T28 Turbo

Description:

Bush bearing, Oil and water cooled, .48 A/R internal gate turbine housing, .60 A/R compressor cover, 47mm compressor wheel, Brand new actuator. same as S15 SR20DET but with a smaller exhaust housing.

Condition:

reconditioned, new seals and bearings, rebalanced, new actuator.

Price:

$550 ono

Pics:

Item6:

Garrett T3/T4 turbo

Description:

Bush bearing, Oil and water cooled, .86 A/R external gate single pulse turbine housing, T3 sierra turbine wheel, .50 A/R compressor cover, 57mm 6 blade T04E compressor wheel. Suit high HP 4 cylinder applications (SR, CA etc)

Condition:

new turbine housing, reconditioned with new bearings and seals, balanced etc.

Price:

$650 ono

Pics:

Item7:

Garrett T04E Turbo

Description:

Bush bearing, Oil cooled, .96 A/R turbine housing, external gate, single pulse T4 inlet, 3inch V-band outlet, "p" trim turbine wheel,.50 A/R compressor cover, 57mm 6 blade T04E compressor wheel. will suit rotary applications.

Condition:

reconditioned, new seals and bearings, rebalanced.

Price:

$650 ono

Pics:

I also have a selection of Garrett T3 and T4 shafts, compressor wheels, compressor covers, diffuser plates, heatshields, turbine housings, bearings and seals, Nissan compressor pipes (RB20 and RB25), T28 actuators, wastegate adaptors and more. For more information, PM me with details of what you need.

All prices are negotiable, I'm located on the southside of brisbane for those who want to pick up, but i will post interstate if needed. buyer must pay frieght costs. All reconditioned units have been rebuilt by qualified technicians at a registered turbo remanufacturing shop. items are being sold to clear up space as they are no longer needed.

For anyone interested in more information, please PM me and i will get back to you as soon as possible.

[tx240]

Item:8

Garrett T3/T4 Highflow turbo

Description:

water and oil cooled, Rb25det rear housing, RB30et Turbine wheel, Highflowed T04E compressor cover, 57mm 6 blade T04E compressor wheel, internal gate with 10psi actuator, Upgrade for RB25DET, bolts to original exhaust manifold+dump pipe+oil and water lines, needs modification to intake plumbing. will support upto 450HP. Modified Thrust bearing for greater load handling (upto 21psi)

Condition:

Fully reconditioned, new bearings, seals, balanced. has not been used since rebuild

Price:

$750 ono

Will post pics asap.

I also have some speedflow 100 series fittings for sale:

2x -16 90 degree $25 each

2x -16 45 degree $25 each

2x -16 straight $20 each

5x -12 straight $20 each

have heaps more and will list soon.

Edited January 29, 2009 by tx240

[Crossie]

^who did the highflow on that one?

[tx240]

^who did the highflow on that one?

A friend of mine that works at MTQ did it for me a while ago

[tx240]

Ive got some pics for item 8 now, so for those that are interested, here you go:

Ive also got a few more performance parts that im selling on this thread,

Garrett Intercooler (400x250x80mm with 2" hose inlets):

$450ono

2x AP racing clutch cylinders - $200 each

1x AP racing rebuild kit - $30

1x Bogaaurd turbo timer (new) - $100

1x HKS SSQV BOV (new) - $400

Also have lots more speedflow fittings, dont know what i have so let me know what your chasing and i'll see if i have one.

PICS:

[heaveyfoot_ skyliner]

Item1:

Garrett/Scania GT40 Turbo, Part # 452315-12

Description:

Bush bearing, Oil cooled, Internal gate, T4 split pulse inlet

Condition:

Near new, was run for a short time before being replaced by a larger unit. Has been completely cleaned, rebalanced and resealed.

Price:

$900 ono

Pics:

Item2:

Garrett VL Hiflow Turbo

Description:

Bush bearing, oil and watercooled, Internal gate (needs VL dump pipe), hiflowed .63 A/R turbine housing,-3 hiflow turbine wheel,410299-4 hiflow compressor wheel, Hiflow VL compressor cover. will give aprroximately 40% more HP to an already turbo'd RB30

Condition:

Reconditioned covers and centre housing, brand new wheels, back plate, bearings and seals

Price:

$650 ono

Pics:

Item3:

IHI RHB32 turbo

Description:

Bush bearing, oil cooled, internal gate. This unit suits early model turbo charades, but will work well on motors between 500cc and 1000cc

Condition:

Brand new, never used

Price:

$500 ono

Pics:

Item4:

Garrett T25g

Description:

Bush bearing, Oil and water cooled, .48 A/R internal gate turbine Housing, .48 A/R compressor cover, same as CA18DET unit but with a smaller exhaust housing.

Condition:

Reconditioned, new bearings and seals, rebalanced. Has not been used since rebuild.

Price:

$450 ono

Pics:

Item5:

Garrett T28 Turbo

Description:

Bush bearing, Oil and water cooled, .48 A/R internal gate turbine housing, .60 A/R compressor cover, 47mm compressor wheel, Brand new actuator. same as S15 SR20DET but with a smaller exhaust housing.

Condition:

reconditioned, new seals and bearings, rebalanced, new actuator.

Price:

$550 ono

Pics:

Item6:

Garrett T3/T4 turbo

Description:

Bush bearing, Oil and water cooled, .86 A/R external gate single pulse turbine housing, T3 sierra turbine wheel, .50 A/R compressor cover, 57mm 6 blade T04E compressor wheel. Suit high HP 4 cylinder applications (SR, CA etc)

Condition:

new turbine housing, reconditioned with new bearings and seals, balanced etc.

Price:

$650 ono

Pics:

Item7:

Garrett T04E Turbo

Description:

Bush bearing, Oil cooled, .96 A/R turbine housing, external gate, single pulse T4 inlet, 3inch V-band outlet, "p" trim turbine wheel,.50 A/R compressor cover, 57mm 6 blade T04E compressor wheel. will suit rotary applications.

Condition:

reconditioned, new seals and bearings, rebalanced.

Price:

$650 ono

Pics:

I also have a selection of Garrett T3 and T4 shafts, compressor wheels, compressor covers, diffuser plates, heatshields, turbine housings, bearings and seals, Nissan compressor pipes (RB20 and RB25), T28 actuators, wastegate adaptors and more. For more information, PM me with details of what you need.

All prices are negotiable, I'm located on the southside of brisbane for those who want to pick up, but i will post interstate if needed. buyer must pay frieght costs. All reconditioned units have been rebuilt by qualified technicians at a registered turbo remanufacturing shop. items are being sold to clear up space as they are no longer needed.

For anyone interested in more information, please PM me and i will get back to you as soon as possible.

[/quot

hi mate which of the following turbos are for rb20det r 32 manuall ?

and do i need any extra parts like elbow for fiting it ?

thnks

[H@ME]

wow thasts a lot of turbos think u have fittings for an r33 turbo oil feed line?

[B-Man]

Item 6 - t3/34

What size is the exhaust wheel ?? Do you know trim ?

ta

[AUTOSPARKY74]

Item1:

Garrett/Scania GT40 Turbo, Part # 452315-12

Description:

Bush bearing, Oil cooled, Internal gate, T4 split pulse inlet

Condition:

Near new, was run for a short time before being replaced by a larger unit. Has been completely cleaned, rebalanced and resealed.

Price:

$900 ono

Pics:

Item2:

Garrett VL Hiflow Turbo

Description:

Bush bearing, oil and watercooled, Internal gate (needs VL dump pipe), hiflowed .63 A/R turbine housing,-3 hiflow turbine wheel,410299-4 hiflow compressor wheel, Hiflow VL compressor cover. will give aprroximately 40% more HP to an already turbo'd RB30

Condition:

Reconditioned covers and centre housing, brand new wheels, back plate, bearings and seals

Price:

$650 ono

Pics:

Item3:

IHI RHB32 turbo

Description:

Bush bearing, oil cooled, internal gate. This unit suits early model turbo charades, but will work well on motors between 500cc and 1000cc

Condition:

Brand new, never used

Price:

$500 ono

Pics:

Item4:

Garrett T25g

Description:

Bush bearing, Oil and water cooled, .48 A/R internal gate turbine Housing, .48 A/R compressor cover, same as CA18DET unit but with a smaller exhaust housing.

Condition:

Reconditioned, new bearings and seals, rebalanced. Has not been used since rebuild.

Price:

$450 ono

Pics:

Item5:

Garrett T28 Turbo

Description:

Bush bearing, Oil and water cooled, .48 A/R internal gate turbine housing, .60 A/R compressor cover, 47mm compressor wheel, Brand new actuator. same as S15 SR20DET but with a smaller exhaust housing.

Condition:

reconditioned, new seals and bearings, rebalanced, new actuator.

Price:

$550 ono

Pics:

Item6:

Garrett T3/T4 turbo

Description:

Bush bearing, Oil and water cooled, .86 A/R external gate single pulse turbine housing, T3 sierra turbine wheel, .50 A/R compressor cover, 57mm 6 blade T04E compressor wheel. Suit high HP 4 cylinder applications (SR, CA etc)

Condition:

new turbine housing, reconditioned with new bearings and seals, balanced etc.

Price:

$650 ono

Pics:

Item7:

Garrett T04E Turbo

Description:

Bush bearing, Oil cooled, .96 A/R turbine housing, external gate, single pulse T4 inlet, 3inch V-band outlet, "p" trim turbine wheel,.50 A/R compressor cover, 57mm 6 blade T04E compressor wheel. will suit rotary applications.

Condition:

reconditioned, new seals and bearings, rebalanced.

Price:

$650 ono

Pics:

I also have a selection of Garrett T3 and T4 shafts, compressor wheels, compressor covers, diffuser plates, heatshields, turbine housings, bearings and seals, Nissan compressor pipes (RB20 and RB25), T28 actuators, wastegate adaptors and more. For more information, PM me with details of what you need.

All prices are negotiable, I'm located on the southside of brisbane for those who want to pick up, but i will post interstate if needed. buyer must pay frieght costs. All reconditioned units have been rebuilt by qualified technicians at a registered turbo remanufacturing shop. items are being sold to clear up space as they are no longer needed.

For anyone interested in more information, please PM me and i will get back to you as soon as possible.