Jump to content
SAU Community

Recommended Posts

hey so im looking at buying my first skyline.

as soon as i sell my current ride (2004 holden commodore 's' pack) ill be lookin to purchase a r33 gts-t manual

ive searched thru carsguide/carsales/drive ect, and there arent many around in w.a, also the ones that are here look more expensive then what i find from over east.

any good yards you guys could recomend for me to have a look at?

would it be worth buying from over east?

Link to comment
https://www.sau.com.au/forums/topic/254552-where-to-get-an-r33/
Share on other sites

aha wow ok, autotrader (which was redirected to tradingpost) has alot more search results then the other sites ive tried.

the website didnt come up in my google search, hence the reason i havent checked it.

thanks :yes:

Make sure to get a series 2 in UBER RARE SILVER!!11TY!

But there are a few import places in wangara, dc imports is 2 minutes down the road from autoworx as well if you cant find anything from them, but just remember dont buy the first thing you get into, look around :P

Be patient, keep searching these forums and all trading posts.

Look for a car that has been rebuilt with lots of goodies some poor bastard wasted all there money on. Don't bother with a stock example, you'll end up being that poor bastard too.

Make sure the car is tested for compression/leakdown blah blah blah, find out where it was rebuilt etc. Look for one with good interior and body.

You will find the re sale value of the 33's is less over in the eastern states that is why there cheaper.

Good luck.

Look for a car that has been rebuilt with lots of goodies some poor bastard wasted all there money on. Don't bother with a stock example, you'll end up being that poor bastard too.

That would depend on what he wants out of the car tho. If he is anything like me a stock example would be better. If you want to build it ur self and make it truely your car then stock is the only way to go.

If you dont mind driving someone elses work then by all means go for a worked r33. =)

i agree buying a worked example is better then a stocker

will save you thousands in the end

i mean all mods are very similar in the train of thought

more boost rebuild more boost and more boost

if spending 2x as much money is truely your car then i hope you have deep pockets

That would depend on what he wants out of the car tho. If he is anything like me a stock example would be better. If you want to build it ur self and make it truely your car then stock is the only way to go.

If you dont mind driving someone elses work then by all means go for a worked r33. =)

What evr car anyone drives its always going to be someone elses work.

If you want to make it your own, change the appearance its not as costly as performance mods.

I went down that road i purchased a stock example and i made it my own appearance and performance. Would i do it that way again? No way

What evr car anyone drives its always going to be someone elses work.

If you want to make it your own, change the appearance its not as costly as performance mods.

I went down that road i purchased a stock example and i made it my own appearance and performance. Would i do it that way again? No way

What do you mean its always going to be someones elses work?

Ive yet to send my car to a workshop (apart from wheel alignments and the proffesional alarm install).

All my mods have been done in house. Although It does help my dad is a car nut and i have access to all the tools i need to get things done.

This ranges from installing intercoolers, radiators, exhaust systems to gauges to painting and fitting a body kit and not to mention maintaence work...

Like its been said above it all comes down to whether its your hobby or not. I enjoy working on my car and thats why i chose to get a relatively stock r33 over a worked one. I wanted to do the work... and if you can do it ur self its not that expensive. You just got to becareful what you buy and when you buy it.

I do agree if you do not wish to do the work or simply dont have access to the tools then a worked example will be the choice for you.

Edited by br3ndan

Its someone elses work cause someone else manufactured the vechicle ie nissan. Just being smart there :blink:

If he is like you and he wants to do the work himself then yes buying a stock one would be best but defintely not cost effective.

Its someone elses work cause someone else manufactured the vechicle ie nissan. Just being smart there :blink:

If he is like you and he wants to do the work himself then yes buying a stock one would be best but defintely not cost effective.

haha... agreed ;)

nows its just down to finding the actual car

well ultimately it depends on how much i get for my current car.

but 13/15k is my range

spoke to guys at autoworx, they have no r33's atm as the costs for them are to high atm (exchange rates), but they may have 1 on the way.

ill check out down under auto's this week.

wangara is near by for me.

id prefer stock, even tho itl cost more in the long run, id just like the satisfaction of buying and geting it all done myself:)

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Strangely I noticed it either disappear later in the day, or not be present. I definitely noticed when I was crawling around that open wheel thingy entering the pits (that part was audible in car). Driving home and commuting around town for example, I didn't hear it. It's plausible that it was a brake disc or something still slightly in contact. The brakes absolutely felt BAD for the first couple of sessions, huge amounts of shudder and grinding as they got up to temp - And then I actually just forgot about it as the day went on/didn't notice it. The videos were from the morning when this was more present than the afternoon/drive home when it wasn't. I've asked around and got a variety of responses including handbrake shoe contacting hub, CV joints, CB tailshaft bearing as above, and clutch input bearing. I didn't test if it disappeared when clutch was in. I haven't noticed it in any of the other videos nor did I notice it when driving to that extent. More or less hoping the microphone at the rear license plate giving some kind of clue of 'something' but it looks like "spin stuff and see if you can notice it" is the way forward here. I could be smart and use the gopro mic and re-mount it to that location to see if the sound is still present at low speed actually. Sounds like a decent test whenver I have the CBF'ness to drive the car again. Given it's almost 40C for the day of the track day and the next 3 days after, the CBF is high. All I've done since getting home is unpack the car, remove the remnants of the lip and undertray and left it there. I was surprised how well the PMU Club Racers actually worked. The brake performance on the track was absolutely fantastic, best I've ever personally used, no fade whatsoever and the bitiness was almost too good, I was scrubbing more speed off than I needed to, but I also ended up infield when I started trying to scrape off ... less speed.... so...
    • Not really, no. Anything you would do is easily reversible.
    • I would like more noise related info for my truly uneducated guess  Does it do it at idle or when revving, clutch engaged, and disengaged? Does it only do it when the car is moving? I've heard "similar" noises from a clutch pack that left the chat room, and CV joints that have chewed themselves out But as Matt said, how's the yokes, tailshaft and centre bearing going after their last little issue Fingers crossed it is something simple  Weird noises make me cringe 
    • One other question, is there a chance that changing the idle speed can lead you down a rabbit hole and is the reason the tuner didn't touch it? Reason I ask is because if that's the reason the tuner avoided it then I probably shouldn't be touching it lol.
    • Pfft. As if I'd ever point a high pressure washer at my car.
×
×
  • Create New...