Jump to content
SAU Community

Recommended Posts

Hey guys,

Before I owned a skyline I had a massive interest in them (as most people do) but had noticed that alot of people who I knew and had spoken to had problems with the idle on these cars.

After buying one myself I hadn't noticed it, until maybe the second month.

Revs were very erratic, jumping up and down, and even stalling a couple of times.

I had spoken to a few people regarding my own car and they had said it may be a vacuum leak, etc etc.

Then my boys car started playing up too so I decided we needed to do something, numerous mechanics had suggested many different things to try so we could figure it out but I, and my boy had both decided we didn't want to waste money guessing.

I work for Toyota and one of the mechanics also has a skyline, luckily for me he is very talented at what he does and didn't just guess or take a stab in the dark like so many other people I had spoken to suggested doing.

Turns out the throttle body and air flow just needed a clean, a problem that was causing my car to stall and be a pain in the *** took about 15 minutes to fix??? How could it be!

I know a few people have/are experiencing this problem so this is just a little tip instead of wasting your money guessing and trouble shooting.

This is really common when you have a pod filter.

Dirty throttle body = faulty signals to TPC and erratic idling.

Even just as a maintenance thing I would suggest it :D

Thanks guys.

Edited by MZBLTZ
Link to comment
https://www.sau.com.au/forums/topic/255131-erratic-idling/
Share on other sites

  • 2 weeks later...

How do i actualy clean it out, just starting to get into the mechanics of cars ect and not sure what you need to do to clean out the throttle body and air flow.

If some one has some sort of step by step and some pics may help

cheers!

Link to comment
https://www.sau.com.au/forums/topic/255131-erratic-idling/#findComment-4425406
Share on other sites

How do i actualy clean it out, just starting to get into the mechanics of cars ect and not sure what you need to do to clean out the throttle body and air flow.

If some one has some sort of step by step and some pics may help

cheers!

to clean your throttle body

get your engine warm (leave it to run for about 5mins) and switch it off.

remove the induction pipe coming of either your intercooler or your air filter. usually just take of the hose clamps holding the rubber hose and you should b able to see the throttle butterfly. you might need to take of a couple of other vac hoses or bolts (i cant remmber the setup on a rb20 but it should be similar to the setup on a rb25)

you can get a can of crc carburettor and throttle body cleaner from bursons or repco for like $10 max.

open up the butterfly by pulling on the accelerator cable. spray some crc into the throttle body and wipe inside with a clean rag, youll see how much dirt is built up inside. especially where the butterfly sits.

put everything back together and tighten hose clamps.

when you go to start the car itll take a little bit longer than normal because of the crc stuff inside the engine and have a rough idle for a bout a minute. pump the accelerator n it should clear up.

Link to comment
https://www.sau.com.au/forums/topic/255131-erratic-idling/#findComment-4425472
Share on other sites

If you have a pod filter (And even if you don't) clean your AFM. It'll help MAJORLY.

Pod filters often are filled with oil, this sucks onto the AFM, and stops the air flow from cooling the hot wire, which makes the ECU think there is different amounts of air going in to what there is.

To clean the IAC valve the easy way, go to Subaru, buy a can of Subaru upper engine cleaner.

Follow the directions on the can.

Link to comment
https://www.sau.com.au/forums/topic/255131-erratic-idling/#findComment-4425703
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • I have two German Shepherds that like to bite things that are in places they shouldn't be. Plus the cars/batteries on chargers are inside a locked garage, inside that fully fenced and locked yard. If you can get the car out, you can have it, as I'll be having one hell of a laugh at your expense.
    • Looks like they changed the wording in the manual for the new model. I have a different model. Mine is CC1206. Not CC1206-XLI. Mine doesn't support lithium at all. I can't find the manual for my model online and they don't list the model on the Century website anymore either. In my manual it says what I quoted and that they recommend to not leave it on 🤷‍♂️ Sounds like you'd be fine with this one now.
    • Thanks for actually answering every single point! I noticed the date only after posting. And yes, looks like things have changed a little bit since then. FWIW, looks like Government Gazette No 253 has the current emissions test procedure. Sounds pretty reasonable altogether. One thing I learned from this is that it's possible to check whether a catalyst does any work by measuring the temperature. Catalyst outlet temp is at least 40°C higher than inlet temps if there is a reaction happening. I'd be curious to check this on mine but don't have a thermometer. Because purely going by smell it can't be doing much. Personally I'd be okay to pay for the test as long as it's within reason. My main concern would be to lose my rego because it definitely wouldn't pass the test in its current state. I'll see if I can do a bit more digging and see what's involved in doing this nowadays.   To be fair I don't think it's stopping many people from doing the modifications anyway. It just puts a barrier up to doing things right  
    • Uhhh if anyone sees this - I bought a BRZ years ago, on my fulls soon so back on the market for the R34!
    • Research research research, and tackle the important things first, like the rust, because as a wise old hippie and some crazy horses once said "rust never sleeps" Nothing good comes easy and fast, and nothing that comes easy and fast is typically good
×
×
  • Create New...