Jump to content
SAU Community

Recommended Posts

fd_irw08_toshiking_photo_otsuki005.jpg

Hi All,

The Tuners Group is very proud to announce that we have been appointed by Works Bell in Japan to find a new home and owner for Toshiki Yoshioka's legendary AE86 drift car.

For sale is Yoshioka's car, which he has campaigned with enormous success and with which he won the Las Vegas round of Formula D in 2008 where he stunned the US drifting community with the mindblowing speed of his AE86.

This car is without doubt one of the most developed, most advanced, and most successful AE86's on the planet.

fd_04.jpg

The specs list is completely mindblowing.

No expense has been spared in building this car - we are advised that Team Droo-P spent roughly 8,000,000 Japanese Yen on building this car. That amount spent to build the car is approximately US $87,000 / Euro 68,000 / Sterling £61,400 / UAE Dirhams 320,000 / Australian $134,000 on today's exchange rate !

The asking price represents outstanding value, and is WAY below what it would cost to try to build a car with equivalent specs from scratch.

US$87,000 is what it cost to build, not the asking price for the sale of the car. The asking price for the sale of the car is WAY below the build cost.

fd_irw08_toshiking_photo_otsuki009.jpg

You can check out the specs list and a photo gallery, videos etc at ...

http://www.tunersgroup.com/yoshioka_ae86.html

As we definitely want this car to go to a good home, we'd definitely appreciate people's help in getting the word out about this car, so if you are a member of any drift forums or AE86 forums, feel free to repost this post.

- Adam

  • 3 weeks later...
  • 3 months later...

large769.jpg

PRICE DROP IN SOME CURRENCIES DUE TO CHANGES IN JAPANESE YEN EXCHANGE RATE

Hi All,

As we noted when Yoshioka's AE86 and the extensive spares package was put on the market, the Japanese Yen was very strong, particularly against the Australian dollar and a number of other currencies.

The price in Japanese Yen of JPY 3,500,000 is still the same, but due to recent changes in the Japanese Yen exchange rate, the price of the car in Australian Dollars and a number of other currencies is now much lower ...

When the car was put on the market, the price of JPY 3,500,000 was equivalent to Australian $59,500.

On today's exchange rate, the price of JPY 3,500,000 for the car and extensive spares package is now equivalent to Australian $45,477.

Compared to the price when this car was first put on the market, this is a saving in Australian Dollar equivalent terms of more than AU$14,000 (a saving of roughly 23.5%)

Due to the changes in exchange rates of various currencies compared to the Japanese Yen, as at exchange rates on 16 June 2009, the Japanese price equivalent in:

- Australian Dollars has dropped from AU$59,500 to AU$45,477 (a saving of approx AU$14,000 or approx 23.5%)

- US Dollars has dropped from US$38,000 to US$36,263 (a saving of approx US$1,737)

- Euro has dropped from Euro 30,150 to Euro 26,155 (a saving of approx Euro 3,995)

- English Sterling £ has dropped from English Sterling £26,700 to English Sterling £22,106 (a saving of approx £ 4,594)

- UAE Dirhams has dropped from UAE Dirhams 139,885 to UAE Dirhams 133,155 (a saving of approx UAE Dirhams 6,730).

We are advised that Team Droo-P spent roughly Japanese Yen 8,000,000 on building this car. The asking price of Japanese Yen 3,500,000 is less than half this amount.

Full specs, photos, videos, details of the extensive spares package, and more info can be found on The Tuners Group website at ...

http://www.tunersgroup.com/yoshioka_ae86.html

- Adam



  • Similar Content

  • Latest Posts

    • I would paint match the whole thing to avoid unwanted attention  I had a similar bonnet, paint matched, on my old R33 GTST, but mine was a fibreglass jobbie made by Blitz in QLD, they work extremely well for radiator efficiency and under bonnet temps
    • Does anyone run this kit with factory plenum? Does the adapter and bosch tb fit under factory strut brace? I wanted to get this setup before going forward facing manifold. Thanks
    • small update time, after always wanting a "cool" looking bonnet for my car and always struggling to find one for the series 2 that i liked and wasn't an insane amount of money. Saw one i liked on RHDjapan from D-speed in Japan the price was very good for a carbon bonnet so good infact i was a little unsure how much i trusted it, decided to bite the bullet and with the help of jesse streeter in not long at all it was at my door. Once it was delivered i ran in from work and quickly unboxed it and to my surprise the quality was actually pretty good i quickly removed the old bonnet and placed on the new one to test it out and even the fitment wasnt too bad at all. Then decided to paint the little grille in the bonnet black to stop it sticking out so much.   I decided to not mess around with the hood latch and just install some aero catch hood pins, having never installed them before did some YouTube university classes and i was good to go. fair to say it is not a fun job at all from making brackets so the pins sit nicely and actually cutting through the bonnet but also being very scared of cutting the holes too big it took wayyyy longer than i would like to admit but finally got it there. Then it was time for a quick test drive to ensure the latches actually worked and thankfully the bonnet looked very stable. I still think paint matching the bonnet and leaving just the part that sticks up as carbon would help make it all look alot neater as im not sure how i feel about all that carbon on a very fridge white car but will leave it as is and see how i feel with time.  
    • I think it's bound to happen, you finally get it all perfect, and bam, something will happen. I took a while to get a Commodore rear quarter repaired where a P Plater clipped it. Two days after getting it back, Sarah wiped it out on a concrete pillar in an underground car park... This is why I take forever to repair them, it stretches how long until it gets bent again... 😛
    • Nah, not really responsible for that little fiasco, but I'm still pissed at myself for writing off my 86, or when I reversed my VX into a pole just before selling it, but, meh, 5hit happens to stuff, all it takes is a slight distraction, and life is full of distractions, and "dooh" moments   
×
×
  • Create New...