Jump to content
SAU Community

Recommended Posts

Hi everyone, i'm new to these forums and i'm about to purchase a R34 GTR VspecII, before i go ahead with the purchase i wanted to ask if there are any specific things i should look at on the car? I've checked for rust, engine condition, chassis rails, seals and paint. I've noticed that the LCD HUD screen on the GTR has 3 lines going down on it, it doesn't really bother me but the dealer said he'll replace it when i purchase the car but i dunno if i should get the replacement one or stay with the original one and try to lower the price, what do you think?

Thanks heaps for ur help!

Look at the seats, make sure they are not worn. Look real close.

That sounds funny about the scree, I had the same problem, can you PM the car and dealer etc? Might be able to help you.

I ended up buying a new screen for $1400, but ask MONEYPIT he ended up buying the LCD for $80 and did it himself.

I highly recommend taking the GTR to someone that knows the engine. Make sure you get it inspected. Try and get one with the original ODO so the Km's haven't been changed.

Check the diffusers, make sure they are there front and back. All electrics work.

Check your PM, i will msg you.

Hi everyone, i'm new to these forums and i'm about to purchase a R34 GTR VspecII, before i go ahead with the purchase i wanted to ask if there are any specific things i should look at on the car? I've checked for rust, engine condition, chassis rails, seals and paint. I've noticed that the LCD HUD screen on the GTR has 3 lines going down on it, it doesn't really bother me but the dealer said he'll replace it when i purchase the car but i dunno if i should get the replacement one or stay with the original one and try to lower the price, what do you think?

Thanks heaps for ur help!

well if you like car, id say just pay the deposit........and get him to replace it first........

can you imagine how hard it is to get him to replace it after you purchase it?

he could pack the dealership up and go home for all you know......

i recall one being sold at a wrecker who sold it on Ebay for 500$ US.......

theyre not cheap...........

I think him not rushing into it is a pretty smart idea.

well i know what your trying to say

but i dont think i was pushing him anyway...

coz if you read his question

he was stating whether he should BUY the car and get replacement..(if he ment to replace himself or the dealership) OR... simply stay with the damaged MFD and try and bargain......

but as i metnioned.....

those things are not cheap....and can cost a fair bit to replace....

so if this guy who CLAIMS he can get it done.....then let him do so first....he may want a deposit first to get the ball rollin........

which dealership is it by the way?

Look at the seats, make sure they are not worn. Look real close.

That sounds funny about the scree, I had the same problem, can you PM the car and dealer etc? Might be able to help you.

I ended up buying a new screen for $1400, but ask MONEYPIT he ended up buying the LCD for $80 and did it himself.

I highly recommend taking the GTR to someone that knows the engine. Make sure you get it inspected. Try and get one with the original ODO so the Km's haven't been changed.

Check the diffusers, make sure they are there front and back. All electrics work.

Check your PM, i will msg you.

PM replied ;)

Thanks for the help so far guys. I already had a look at the car yesterday. The seats and interior seem very fresh. Though, the MFD does have 3 lines through it. But the dealer says he will fix/change that before I buy it. I'm not sure if I should let them change it or just leave it, change it myself when I buy it and get them to take some money off their asking price ($70k).

Its a 2001 model R34 GTR V-Spec II with 39,000kms on it by the way. All four wheels do have gutter rash but besides that and the MFD issue, there is really nothing else I could find wrong with it. Although, if I were to buy it, I would like to have it thoroughly inspected by a GTR specialist and also have it up on the hoist to have a look underneath for rust, accident signs etc..

$1400 isn't that bad for a new screen. I was expecting like $5k or something ridiculous like that.

By original ODO do you mean the one I sent you in the PM Turbo Piston? and not a Nismo 300km/h one or something. Isn't it still possible to change the kms anyway?? Just change out the dash with a lower km one if they really wanted to right?

I didn't check if the front diffuser was there. But I know the rear one is there for sure. I will have to check all the electrics next time I go there to see the Auction papers.

I requested for them yesterday but for some reason he didn't have them on hand which I found quite strange since they have all these imports in their yard/warehouse...Is this something to worry about?

I personally would like to see them but they can just be dodgied up cant they?

Anyways I have soo many questions, I don't really know where to start :)

Thanks for all the help guys. I appreciate it ;)

Phil.

EDIT: Oh btw, my current car is still under finance so I am kind of forced into 1. finding a GTR at a dealer willing to accept my car as a trade.

2. finding a GTR that I can transfer my finance to.

Edited by Okonomiyaki

Yea, original ODO comes with 180km/h speedo. The nismo ones comes with 320 km/h which means they have been changed. They will document it if they have changed it, so try and find those papers, if they don't, then they have probably swapped it for an ODO with lower K's, so check the car for wear and tear and hopefully it matches up to the K's on the dash. My car came with 47,000Kms, original dash, and the carpets and seats are mint!

When something is missing, double check everything! Ooops I can't find it would worry me!

Keep asking questions anyway, we'll try and help you out as much as possible!

Carpets, seats, steering wheel, gear knob, hell almost everything can be changed to make the entire package look fresh. Honestly I wouldn't regard ANY odometer as a basis for it's general condition or wear and tear unless if it has the original documentation and log books, then it's a bonus. If not, then you need to assess the car based on other things like:

- Underbody rust which is quite common with these cars. Some dealers i've seen spray the entire underbody black to hide rust.

- Check the bushes, see if they are rooted. A lot of the bushes have fluid in them and when they leak , you know it needs to be replaced.

- Check the panels have good alignment.

- Check the paintwork is original.

- Check for engine, g/b, transfer case, diff leaks.

- When to test drive it, check for steering response, tramlining, things like that.

- Check the Attesa is funtioning properly but doing a hard launch and observing the torque split meter

- Check the wheels bearings are ok cause those things are not cheap to replace.

I can go on and on for things to look out for, but in the end if you're not competent, I would take it to a workshop that knows their GTR's.

Just on the lines on the screen do they go away, come up in different spots are they vertical and change colour green red purple etc mine comes up with a line every now and then shut the car down and restart it sometimes they go or come back in a differenet spot, spoke to some of the guys on the uk gtr forum and several have the same problem i have never really bothered with it and i have had mine for over 3 years now i would say just get a quote and tell the dealer to take that off the price and learn to live with it.

The lines on the screen are permanant unfortunately, but you can get the repalcement Toshiba screen from the US for about $150 which is pretty good considering they still sell on yahoo.jp for $500+

It's a fairly generic screen, not Nissan specific :)

The lines on the screen are permanant unfortunately, but you can get the repalcement Toshiba screen from the US for about $150 which is pretty good considering they still sell on yahoo.jp for $500+

It's a fairly generic screen, not Nissan specific :)

If anyone wants a new screen I have a spare, $150 AUD

takes about 10 minutes to replace it. I did mine.. works like a charm.

on yahoo it is about 20,000 yen.

cheers

Thx for all the help guys!!! :)

I've made a checklist with all the info that you've given me and i'll go into the dealer to inspect it once again!!!

The three lines one the screen are white and permanent... i turned the ignition on and off a few times and it just stays there... :)

Called up the dealer today and he said "unfortunately we didn't get the log books..."

Once again, i greatly appreciate all your help and advice...

Edited by Okonomiyaki
Also, look for shit marks on the passenger seat... for when the passenger has shit himself/herself/itself from being in one of these mighty machines at full boost.

well if your gonna check that out

you may as well tell him to check for cum stains for the backseat for the chicks he picked up......

(japs love Creampies and Bukkake) lol

Who is this dealership and which state are u from. For 70k it better be a damn good example as there's been a few that has been sold for way less than that.
70k I honestly would walk away, if it has no history.

I had a similar "guys in a warehouse" close encounter with a similarly priced Nur (and this was a Nur! and before the financial crisis!) and got the "oh we don't have the papers from the japanese side" story.

Yeah, believe me, if the papers had anything good on them, they'd be in the office and the first thing they'd show you.

Turned out the car was sold to them from a mob in Japan that specialized in accident damaged cars.. they were experts in cleaning cars up and presenting them as low km, "perfect" examples (just with no docs).

Run away,

place an advert in WTB putting up your 70k and asking for local sellers. my bet is you'll find a great example for the money, and probably

with improvements you'll end up buying anyway, owned by some OCD type person who has spent as much on it as they originally bought it for.

70k I honestly would walk away, if it has no history.

I had a similar "guys in a warehouse" close encounter with a similarly priced Nur (and this was a Nur! and before the financial crisis!) and got the "oh we don't have the papers from the japanese side" story.

Yeah, believe me, if the papers had anything good on them, they'd be in the office and the first thing they'd show you.

Turned out the car was sold to them from a mob in Japan that specialized in accident damaged cars.. they were experts in cleaning cars up and presenting them as low km, "perfect" examples (just with no docs).

Run away,

place an advert in WTB putting up your 70k and asking for local sellers. my bet is you'll find a great example for the money, and probably

with improvements you'll end up buying anyway, owned by some OCD type person who has spent as much on it as they originally bought it for.

how did you find out about the car and its history?

i guess some of the Low Km models are infact repair damaged with new or swapped instrument clusters

how did you find out about the car and its history?

i guess some of the Low Km models are infact repair damaged with new or swapped instrument clusters

i

Actually, any digital odometer can be wound back with a device. It's easier than winding back an analogue one.

I recall there being a thread around which looked at all the things to look for when buying a GTR/Skyline etc.. Strange i just saw this as i was just looking for that thread. Will definately help! Anyone know where it is?

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Howdy friends, So another weird one today, I was looking into replacing some broken clips holding the front grille for the R32 GTR (part number 01553-03831), and noticed the brackets which are supposed to hold the grille in place were also missing 😑. I do recall seeing this issue many years ago, but didn't fix it at the time. A quick look on eBay and I was able to find the genuine brackets, along with all the screws which suited the headlights (part numbers 26042-08U05,26092-08U05). Happy days!....  Once they arrived however there was an extra nut in the packaging which implied that there should also be a bolt or a stud, and sure enough, after a bit of searching I found this thread from 2013, and @Ants clearly shows a stud should be present. Reading around a bit more, it's possible the headlights on my car are the "povo pack" headlights as mentioned by @funkymonkey in this thread way back in 2008. This could explain why the studs are missing on my set of headlights. Looking at the headlight diagram I wasn't able to see a suitable part number for the stud itself. The headlight did indeed have a recess that looked like it would accept a stud, but interestingly no thread or anything obvious how the stud would be affixed to the headlight, I suspect it may have been glued in, press fit, or melted into the plastic at the factory. Another member may be able to clarify if they happen to have a genuine set of N1 headlamps. The only thing we have to work with within the recess is a keyway which likely is there to prevent the stud from rotating within the recess. In any case, back to 3D printing, I put together a model which acts like a pug with a friction fit inside this recess, making use of the keyway so it doesn't rotate while tightening a bolt. Printing in TPU will allow it to slightly swell making a nice snug fit without cracking the part. I've designed the adaptor it to accept an 20 mm M6 bolt (stainless with a cap head in my case), as opposed to the standard M5 stud and I made use of the standard galvanised split washer that came with the genuine brackets from Nissan. Once the bolt and screws were all in place, giving the bracket a gentle shake gave the classic "shaking the car" feeling, very solid, which gives me confidence this is going to be able to hold on much better than the janky solution which seems to have been here for the past decade or so. Overall I'm really pleased with how this turned out and maybe there are more people out there running these headlights without a centre stud at all! Link to the freely available model on Printables: Click here Regards, Sean  
    • Hey everyone, This is my first post apart of the introduction. I tried searching a bit on the forum but couldn't really get a straight answer. I got the car to my mechanic as I felt it being weak. It seems that it was missing on two cylinders due to the injectors. I had all my injectors clean and the car runs much better. The mechanic also confirmed my suspicions that the cat is clogged and needs to be tackled asap. The cat rattles a bit and the hot exhaust warning frequently lights up when driving after getting the injectors clean. In my introduction I was asked about what modification I might be interested in and mentioned a cat delete. From what I was told, this is not really beneficial on the RB20DE and there are more cons than pros.  Could perhaps anyone give some suggestions on what the best course of action would be since the current cat is toast and needs to be removed/replaced anyway? I can also sometimes smell a strong smell of fuel, but I'm not sure if this is related.
    • Hope the cans went down well at least 
    • 255 can't go wrong with the price.
    • When I was replacing my pump due to being stranded in the wrong state, I went with the Deatschwerks 320lph kit. It is a direct plug in to the stock wires, harness, everything. It comes with a plug... but you can plug the OEM plug directly into this thing. https://justjap.com/products/deatschwerks-dw300-fuel-pump-nissan-s13-silvia-r32-r33-r34-skyline-c34-stagea?currency=AUD Downside: Won't actually flow that much on boost if you want to push it on E85, but it's comparable to the 040/255 etc. Little more actually.
×
×
  • Create New...