Jump to content
SAU Community

Haltech Ecu Group Buy, E11v2, E8 And E6x

J'z-R33

By J'z-R33,
in Group Buys

 Share

Recommended Posts

J'z-R33 Grand Master

J'z-R33

Posted
Posted

Hey Guys & Girls,

We have arranged a Group buy on Haltech ECU's this is the complete range E11v2, E8, and E6x. I believe this is the first and maybe last SAU (or any Forum) Haltech group buy.. This is the 3rd GB I have run on SAU (fuel pumps & ATI balancer's) at very competitive pricing.

Ok down to business, these are Brand New straight from Haltech. Group buy is starting 4/2 and will end on the 17/2 this offer will not be repeated. Prices do not include shipping, I can have then delivered via Toll IPEC at an additional cost, or you can pick up from Sutherland. We need a minimum of 3 people to take advantage of these great prices.

Please email [email protected] for technical advise, I only have limited knowledge on these and do not want to give you the wrong advice.

Pm me or post here if you are genuinely interested, payment will need to be recieved by the cost date.

Please do not post Rubbish in this thread about other ECU's, pricing, or unrelated matters. Serious buyers only please.

E11V2 RRP: $2275 Group Buy price $1545.00

Comes with -ECU Programmable Computer, Flying Lead* Milspec type Main Wiring Harness or Plug and play (excluding R34 GT[T] owners sorry), 3 power relays, Programming Cable, Fuse Block Assembly on Harness, Programming CD, Instruction Manual (on CD) and Haltech Stickers

E8 RRP: $1795 - Group Buy price $1250.00

Comes with -ECU Programmable Computer, Main Wiring Harness, 3 Power Relays, Programming Cable, Fuse Block Assembly on Harness, Programming CD, Instruction Manual (on CD), Haltech Stickers.

E6X RRP: $1395 - Group Buy pricing $900.00

Comes with -ECU Programmable Computer, Programming Cable, Short Wire Harness OR Patch Loom, Programming CD, Instruction Manual on CD and Haltech Stickers.

Optional extra's

1 Bar Map Sensor - RRP: $105.00 - unable to offer a better price,

2 Bar Map Sensor - RRP: $125.00 - unable to offer a better price,

3 Bar Map Sensor - RRP: $125.00 - unable to offer a better price,

LS1 Ignition Coil - RRP: $95.00 Group Buy Price $82.00 each

Boost Control Solenoid - RRP: $93.00 - unable to offer a better price,

RacePac Dash Kit Basic - RRP:$995 Group Buy Price $955.00

Datalogging RacePac Dash Kit - RRP: $2050 Group Buy Price $1925.00

An overview of Haltech ECU's,

The E11V2 Series

The Haltech E11V2 ECU is an ECU capable of controlling sequential injection on 4,5,6,8 and 10 cylinder applications. With 14 channels capable of controlling injection and ignition duties, the E11V2 can support most modern engines with multi-coil ignition systems, as well as conventional distributor ignition systems.In addition to controlling fuel and spark, the E11V2 can control various auxiliary engine functions such as:

- Stepper motor and BAC/IAC closed loop Idle Control

- Soft cut rev limiter

- Closed loop boost

- O2 sensor closed loop mixture control

- On board data logging (up to 200 samples per second)

- User definable mapping points

- Tuning via TPS with Manifold pressure correction - Ideal for those multi-throttle body turbo cars such as, GTiR Pulsars and GTR Skylines.

- Numerous correction maps to ensure smooth drivability under varying operating conditions Windows Software

Typical Applications:

- Control of fuel injection on modified engines

- Conversion from carburetion to fuel injection

- Race and rally applications of all description

- Design and development purposes

- Educational use by universities and technical colleges

- Original equipment in cars and motorcycle

The E11V2 Flying Lead Kit includes:

ECU Programmable Computer, Flying Lead* Milspec type Main Wiring Harness, 3 power relays, Programming Cable, Fuse Block Assembly on Harness, Programming CD, Instruction Manual (on CD) and Haltech Stickers

The E8 Series

The Haltech E8 is packed with more features than any ECU in its class by more than just a quarter mile. The all new E8 performance ECU is for those who are on a budget and need full sequential control for their engine.

The Haltech E8 ECU is an ECU capable of controlling sequential injection on 2 and 4 cylinder with semi sequential 6 and 8 cylinder applications. With 8 channels capable of controlling injection and ignition duties, the E8 can support most modern engines with multi-coil ignition systems, as well as conventional distributor ignition systems.In addition to controlling fuel and spark, the E8 can control various auxiliary engine functions such as:

- Stepper motor and BAC/IAC closed loop Idle Control

- Closed loop boost control

- Soft cut rev limiter

- Tuning via TPS with Manifold pressure correction - Ideal for those multi-throttle body turbo cars such as, GTiR Pulsars and GTR Skylines.

- O2 sensor closed loop mixture control

- 32x32 mapping structure

- On board data logging (up to 200 samples per second)

- User definable mapping points

- Numerous correction maps to ensure smooth drivability under varying operating conditions

- Windows Software

- The ability to calibrate just about any sensor for OEM applications and of course all the usual outputs you would expect to find in a Haltech engine management system.

Typical Applications:

- Control of fuel injection on modified engines

- Conversion from carburetion to fuel injection-

- Race and rally applications of all description

- Design and development purposes

- Educational use by universities and technical colleges

- Original equipment in cars and motorcycles

The E8 Flying Lead Kit includes:

ECU Programmable Computer, Main Wiring Harness, 3 Power Relays, Programming Cable, Fuse Block Assembly on Harness, Programming CD, Instruction Manual (on CD), Haltech Stickers.

E6X Fuel & Ignition Computer

The Haltech E6X is a powerful "real-time" programmable fuel injection and ignition system computer designed to control most ignition type engines. Whether 1-6, 8, 10 or 12 cylinders, 1-2 rotors, naturally aspirated, turbocharged or supercharged, the HALTECH E6X can control it.

The E6X System optimises engine performance through the following capabilities:

- Ignition timing control

- Fuel control

- Idle speed control

- Closed loop

The E6X is much more than a programmable fuel injection computer - it provides logging of engine data and allows access in real time to maximise performance and trouble-shoot problems in a vehicle while running.

Typical Applications:

- Control of fuel injection on modified engines

- Conversion from carburetion to fuel injection

- Race and rally applications of all description

- Design and development purposes

- Educational use by universities and technical colleges

- Original equipment in cars and motorcycles.

The patented Haltech system of programming virtually eliminates the input of numbers. You simply manipulate bar graphs by pressing arrows keys on the attached PC running Haltech Programming software. Manipulating the bars allows you to increase or decrease the amount of fuel delivered or ignition advance at that particular RPM and load point. The process is repeated for all load points in each rpm range.

Ignition timing is precisely mapped through the RPM range so that the exact timing required to obtain optimum performance is applied in every RPM and load range.

The E6X Short Kit includes:

ECU Programmable Computer, Programming Cable, Short Wire Harness OR Patch Loom, Programming CD, Instruction Manual on CD and Haltech Stickers.

Haltech MAP Sensors

A Haltech MAP sensor (manifold absolute pressure) provides instantaneous pressure information to the electronic control unit (ECU) from the intake manifold - the amount of boost or vacuum in the intake manifold. This is necessary to calculate air density and determine the engine's air mass flow rate or in other words engine load. Engine load is used as a reference for all base fuel and ignition maps.

1 bar MAP sensor

A 1 bar MAP sensor is capable of reading intake pressures below or equal to atmospheric pressure, for this reason a 1 bar MAP sensor is suitable only for naturally aspirated engines (ie not turbo or supercharged).

2 Bar Map Sensor

A 2 bar MAP sensor is capable of reading intake pressures up to 1 bar of positive pressure above atmospheric (otherwise known as boost). This is equivalent to around 14.7psi of boost or 100kpa of positive pressure. This sensor is suitable for turbocharged or supercharged vehicles running 15psi of boost or less.

3 Bar Map Sensor

A 3 bar MAP sensor is capable of reading intake pressures up to 2 bar of positive pressure above atmospheric (otherwise known as boost). This is equivalent to around 29.4psi of boost or 200kpa of positive pressure. This sensor is suitable for turbocharged or supercharged vehicles running between 15psi and 30psi of boost.

LS1 Ignition Coil

A high energy single coil with 'built-in igniter'. For use with wasted spark and direct fire application.

Boost Control Solenoid

The Haltech boost control solenoid allows the user to map boost pressure levels on turbocharged vehicles through the engine management system.

Haltech uses a highly durable short stroke solenoid to increase durability, longevity and of course accuracy of the valve. A high force spring return is used to produce swift valve closing and to prevent valves "blowing" open under high boost applications. Valve movement control (Duty Cycle) map is accessed via the ECU programming software. Raising the duty cycle increases boost pressure, while lowering the duty cycle will reduce boost pressure. The boost control feature allows boost response adjustment for varying turbo sizes.

Depending on the ECU being used some people may want to utilise the gear based boost control feature - this allows separate boost levels to be set at every RPM in every gear. One of the latest features is also the implementation of closed loop boost control where all that needs to be done is tell the ECU exactly what boost to run at each RPM and the computer computes the opening duty cycle of the boost control solenoid automatically - this feature accounts for changes in air temperature, barometric pressure, intercooler heatsoak and any other unexpected factors that may effect inlet air temperature and pressures.

With the continual improvement and innovation consistently going into all of Haltech ECU's in the area of boost control its hard to imagine how your turbocharged engine ever lived without a Haltech boost control solenoid!

Haltech MXL Dash

The Haltech MXL Dash is a powerful, professional and high-tech gauge which allows the user to sample and display a large number of parameters. The Haltech MXL Dash has a bright backlight wide display and a high speed USB data download to PC, which allows data to be analysed using the powerful Race Studio 2 software.

Haltech MXL Street

Will assist you in analysing and optimising your vehicle’s performance. Featuring 1 RPM input, 1 wheel speed input, 6 configurable alarm leds, 10 fully configurable shift lights, 128kb of internal memory, 8 configurable channels, the Haltech MXL Street is what you are searching for.

Haltech MXL Track

If you’re a driver, aiming to your best lap, you will find in the Haltech MXL Track a valuable help to analyse and optimise both you and your vehicle’s performances. Featuring 1 RPM input, 1 wheel speed input, 6 configurable alarm leds, 10 fully configurable shift lights, gear number display, internat lateral G sensor, 8 Megabytes of internal memory, 8 configurable channels, kit’s sensors and infrared transmitters and receivers. Haltech MXL Track is what you are searching for.

The additional CAN protocol allows the Haltech MXL Dash to interface with external expansion modules.

Haltech MXL Pro

If you’re looking for excellence, the most performing data acquisition system, the Haltech MXL Pro has everything you need to bring you on the top of the podium. Featuring 1 RPM input, 4 wheel speed inputs, 6 configurable alarm leds, 10 fully configurable shift lights, gear number display, internat lateral G sensor, 16 Megabytes of internal memory, 12 configurable channels, kit’s sensors and infrared transmitters and receivers, Haltech MXL Pro is your ultimate choice.

Use the Autosport connector and deploy a powerful array of sensors on your vehicle, including pressure, temperature, throttle, steering, suspension, wheel speed, Lambda sond, and more. The additional CAN protocol allows the Haltech MXL Dash to interface with external expansion modules.

The Haltech MXL Dash can be interfaced (via CAN or RS-232 serial) with a variety of Haltech ECU’s.

Connect the Haltech MXL Dash to your vehicle’s ECU and unleash the MXL’s true power: Logging and displaying dozens of channels straight from the vehicle’s nerve center, including specialised sensors built into the vehicle. This is often the quickest and easiest setup, needing only 1 cable connection to the ECU instead of multiple connections to analog sensors, yet it yields the most dramatic results.

Get the most from practice and training sessions by objectively comparing data from runs using different vehicle setups, drivers, and driving strategies to find the winning combinations. The Haltech MXL Dash uses state of the art algorithms to sample, calculate and display RPM, lap time, gear position, wheel speed, temperatures and more.

Also with an optional GPS module you can create detailed 3D track maps.

Pm me or post here if you are genuinely interested, payment will need to be recieved by the cost date.

Please do not post Rubbish in this thread about other ECU's, pricing, or unrelated matters. Serious buyers only please.

Cheers,

Johno

  • Replies 78
  • Created
  • Last Reply

Top Posters In This Topic

Popular Days

Top Posters In This Topic

Popular Days

R33LOD Contributor

R33LOD

Posted
Posted

f**k i want one........................................................................... Holiday or buy an ECU.......................................did you have to do this to me JZ??!!!

J'z-R33 Grand Master

J'z-R33

Posted
  • Author
Posted
f**k i want one........................................................................... Holiday or buy an ECU.......................................did you have to do this to me JZ??!!!

lol, which would you use and enjoy the most....?

Hi, I would like to place and order for an E11V2 for my r33,

with the plug and play harness to suit.

please pm me with the payment details

cheers Nick

No probs Nick, do you have a GTR or GTST? not sure if that matters but I'd rather give the correct info to the supplier.

I've also sent you a Pm with the a/c details.

Guy, we have the numbers to go ahead with the Group Buy, it didnt take long! so if your keen please let me know asap. This offer has only been made to SAU and AE86 club.

Cheers,

Johno

OHH032 Enthusiast

OHH032

Posted
Posted

WOW AND DAMN if only you had this same time last year, I paid about $2750+3bar map sensor+boost solenoid and all up $3000

For people who don't know these computers are great and most workshops can tune them and also THIS IS DIRT CHEAP

Cheers,

Matt

R33LOD Contributor

R33LOD

Posted
Posted

I would definately use and enjoy the ecu more hehehehehehe BUT i deserve this holiday....... and guess what day i come back..... the 17th of feb.... lol.

Put me down for an E6X for an R33 GTST series 1 --- i assume its not plug and play but if it is... ill be happier.

Just wanted to get this straight.... the E6X is a piggy back or replacement ECU?

Thanks.

J'z-R33 Grand Master

J'z-R33

Posted
  • Author
Posted

Hey mate,

The E6x is a Stand alone with internal map sensor, 1 bar vacum, 1.5bar boost.. The only skyline specific plug and play/patch looms are for the E11V2. So the E6x you would need to wire it in yourself with the flying lead kit.

Honestly on a Skyline you'd want to be running an E11V2.. best advise I can give you is to give Haltech a call and discuss the E6x option with them.

Cheers

Johno

J'z-R33 Grand Master

J'z-R33

Posted
  • Author
Posted
Hey im interested in the AIM MXL street Dash however their is no price. is this in the group buy

Sory mate, I called it something else lol.. it is the RacePac Dash Kit Basic - RRP:$995 Group Buy Price $955.00

Cheers

Johno

JJay Proficient

JJay

Posted
Posted
i heard Haltech was releasing a new range therefore leading to the price drops. is this true?

yes, this is true.

i'm waiting for a email back from haltech myself on when they're suppose to be releasing the new one.

heard it was suppose to be this month but havent seen anything yet.

mix200 Apprentice

mix200

Posted
Posted
Sory mate, I called it something else lol.. it is the RacePac Dash Kit Basic - RRP:$995 Group Buy Price $955.00

Cheers

Johno

their is two different brands of dash that haltech use. the AIM MXL series and the Racepac series

Im after the AIM MXL steet version, the price i think is the racepac version

J'z-R33 Grand Master

J'z-R33

Posted
  • Author
Posted
their is two different brands of dash that haltech use. the AIM MXL series and the Racepac series

Im after the AIM MXL steet version, the price i think is the racepac version

Sorry mate I'll give them a call to check first thing tomorrow.

Guest
This topic is now closed to further replies.
 Share
Go to topic listing


×
×
  • Create New...