Jump to content
SAU Community

New GCG 500HP Turbo for sale (GTST Owners)

JUN R33
 Share

Recommended Posts

JUN R33 Rising Star

JUN R33

Posted
Posted

Howdy,

Just posting to see if anyone is seriously interested in saving themselvers $$$ and getting heaps more power from their R32 and R33 Skyline GTST's???

I have for sale a brand spanking new GCG high Flow Stage II turbo still wrapped in plastic rated @ 500HP.

"The factory turbocharger is a ball bearing T3 sized unit with a ceramic turbine wheel. In upgrading this unit we replace the ball bearing pack with a new one while replacing the turbine wheel and compressor wheel with hi-flowed models."

Price is only $2000 where brand new they sell for $2450.

Condition is that you have to send me your old turbo or we can work something out personally.

oh and by the way.......I live in DARWIN :P)

TTT Grand Master

TTT

Posted
Posted

Dude..

Please confirm with GCG that this turbo has a BALL BEARING center AND that it is OK on an RB20.

Last time I spoke with GCG in Sydney, the deal was that for just over $2K you give them your turbo and they rebuild it with Standard NON ball bearing center and replace the blades with T3/T4.

AND they have 2 options..

450 hp or the 500hp.

AND the 500hp was not suited for the RB20... something to do with surging due to mismatch or something..

On an rb25 they were both good.

But the main thing is the bearings.. If indeed they rebuilt it with BB center, then that is an awesome price..

However, I didn't think that ANYONE in Sydney had the Balancing tool required to REbuild BB centers.

GTS26DETT Explorer

GTS26DETT

Posted
Posted

GCG do have the nessacary tools to balance BB centre turbos, there is no problem using the 500HP turbo on the RB20..the surge they refer to is where the RB20 head runs out of effeciency and instaed of accepting more air from the turbo spits it back, this can be resolved with a port job and bigger cams. With having said that the 450HP turbo is better suited to the RB20 due to its smaller rear exhaust housing the turbo wouldnt be as laggy

keca18 Contributor

keca18

Posted
Posted

watch high performance 4, they go into detail about this turbo upgrade. they use your existing turbo, replace both compressor and turbine wheels with t-04s specs + new bearing pack. and yes, they are ball bearing.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing


  • Similar Content

  • Latest Posts

    • MBS206
      G'day!

      By MBS206 · Posted

      Consider a 35 too...
    • dbm7
      One Headlight isn't working - Driver Side Fuse Keeps blowing

      By dbm7 · Posted

      He's right ~ there is no 'magic' with stuff like this ... it is more likely that in the process of looking for the short, the loom/wire 'incidentally' got moved in the process, thus removing the short ~ now, that maybe a wire (in a loom) rubbing against the edge of some grounded metal, that's worn through the insulation, causing the (now intermittent) short to ground. If one wire in a loom has been damaged in this fashion, it's reasonable to presume that other wires beside it may have also be damaged, and now exposed...you can bet the green crusty copper corrosion will start... ...that'd be a pisser, Murphy's Law steps right in as GTS observes...but worse, something like that is easier to find when shorted...ie; unplug bulb and fuse, and put multimeter in continuity mode so you get constant beep, and carefully poke about hoping to find if some movemet of the harness stop the beeping.... ...it's still all a bit Arnie tho' ..It'll be back... 😃
    • GTSBoy
      One Headlight isn't working - Driver Side Fuse Keeps blowing

      By GTSBoy · Posted

      Yeah, but knowledge of one wire's insulation worn through to short on earth implies the possibility of other wires doing the same. I had my power steering die, because the wire that runs to the solenoid valve on the rack runs in the same loom as the power wire for the O2 sensor. And when the O2 sensor/wire did something stupid and burnt part of that loom to death, the only indication was the shit(ter) fuel economy and the heavy steering. It took deep excavation of the looms in the bay to find the problem. Not wear through in that case, but similar shit.
    • MBS206
      Mistakes were made, my R34 Story

      By MBS206 · Posted

      Ah, I thought he'd wired it to one of the spare ECU inputs! Too long ago since I read that post, ha ha. I've been arguing with radiators, harmonic balancers, alternators and rust since reading it.
    • Kinkstaah
      Mistakes were made, my R34 Story

      By Kinkstaah · Posted

      Correct. The ECU cannot read oil temp. (Well, I think it probably can in some situations. I did have the thought of potentially repinning the ECU when I was doing oil pressure). I am using this into the MPVI dongle, so that the MPVI dongle can read oil temperature. It is attached to a VDO gauge which is obviously calibrated to whatever curve the sender actually is using. This would be easy if I could setup a table of voltage to temperature like many sensors, but it appears I cannot do this and can only setup the transform rule which appears to be Input (voltage) x Multiplier, and add an offset. This to me means it MUST be linear. So it may be a complete waste of time wiring this into the ECU. The idea was that the MPVI3 has standalone logging. I wanted to use this instead of a laptop with serial cable (for wideband) for long datalogs. Given the wideband also has electric interference, I may never trust this either in a world where the serial wideband and the analog output wideband do not agree. Last time I did a trace I could see the two wideband traces follow each other, but one was a little leaner than the other. I plan on playing with voltage offsets and actually driving the thing to see how close they correlate. If they never correlate... then, well, maybe I'll never use either. Ideally I'd like to have the Analog wideband read ever so slightly leaner than the serial one, because the serial one is 'correct'. Tuning the car to be ever so slightly too-rich would be the aim. Not needing to have a laptop flying around in the footwell connected with cables is... an advantage. About the only one from the forced upgrade to MPVI3.
×
×
  • Create New...